MAYBE THE SIDES NEED A KICKER LIKE THE SLINGSHOTS IN A PINBALL...THE KICKERS JUST ABOVE THE FLIPPERS TO GIVE THE BALL JUST A LITTLE KICK WHEN HIT :) LOOKS GOOD
if you make the table in the shape of a roof then the ball would always roll down....very very low angle required though like 1 or 2 degrees so the ball doesnt have a hard climb.....make the peak the centre line
@WTFA54 The spring strips on the top and bottom are extremely effective; now that the ball no longer stops in the middle, you can get two or more bounces in a pass.
Gaaraofthesandcastle's idea of the "air hockey" style of having the air jets
two, have it as an automatic scoring system, not a huge deal if not, just would make it less of a hastle to always be turning the dial for every goal
third, instead of the knobs to turn it, have it as a "stick" on each end respectively to control the flipper (ex. the same way you control the goalie on most table hockey games)
Well, what if the circle in Pong isn't a ball, but a disc, or a puck of some sort, then it would be very similar to a limited form of Air Hockey, which in itself is a limited form of hockey. The limitation is that you can only move the paddle in 1 dimension as opposed to the 2 in Air Hockey.
Air Hockey would over come your issues with the ball slowing down, the paddles not bouncing hard enough and gravity having a significant influence.
While you're at it, yeah, America could use a second generation Space Shuttle replacement vehicle, okay. I got the abandoned warehouse and and all the Mexican laborer you'll need. Chop-chop, get a move on, the future of the Internet depends upon you.
i think it looks really cool but just a tip to make it look even better cover up the sides so you don't see the the mechanism that kicks the paddle also a auto sever would be nice other than that it seems like something i'd buy
Perhaps you should give the slightest angle to each side of the board going towards the paddles so it doesn't stop but it can still easily make it over the bump in the middle form slopping them
@peacenlove4every1 well holy damn your name must have been made while you were high or something and if you werent high then it could be something else but your name seems to be a joke to what you said. next time just dont be a dick about it you must be a stupid "non" american
I'm not sure if you plan to make this into something big, but I do have an idea. Maybe the board could have a very slight weight imbalance in the center; so that if the marble begins to roll to a stop, the imbalance will very slightly tilt the board so that it continues rolling in one direction.
My consensus would be giving the paddles a little more kick in them, putting in a level and easy-adjusting legs, and making the board at a slight incline with the middle of the table being more elevated than the goal areas. That way they are in constant motion, and with the extra power they wont fall back on the same side after being hit.
@AyDuM i think they thought that through, because if they did that, it'd be just like playing atari, except your doing it on a table instead of a tv screen. but i do agree. should've made some sort of a better grip, if not in the process.
You guys are aware that the original Atari system, and Pong, were controlled by a paddle controller, that was basically just a rectangle with a wheel on top of it? Just checking.
@pantslesswrock: uhhh, yeah. but what they did here is called modernizing. and therefore my point was they should have created something more modern as opposed to the original atari paddle that had the wheel to control the "paddle" that actually hits the ball.
Well, I would argue that what this is isn't modernizing. In fact, it's the opposite. It's taking a digital game, and attempting to transpose it into a completely non-digital real-world game that doesn't necessarily look like the original, but is still the same game (as opposed to the other real-world pong that looked more like the video game). Also, the knob control method seems like an easier way to make it. I'd like to someday see real-world pong w/o electricity.
good invention, maybe if you apply (crazy glue) some sort of a magnetic rod at each end of the player maybe the metal sphere would make it to the other side. lol.
if you incerease the size of the paddle by a little, the game will last longer. i see where the ball gets hit by the conner of the paddle but with out enough force.
@jameswm69 o sorry that, i dont go thourgh and read all the comments about what others have wrote. my bad if i was trying to give a little help to these people
absolutely one of the coolest things ever! how can i get one of those?? i have a three legged dog named Lexy and im posting videos of her and her life as a tripawd so check it out when you get the chance
Excellent! Now put in a gutter on each end to catch the ball when it passes the bat, angled so the ball rolls down to the bottom and is then re-fired onto the playing field with a solenoid. The switch that operates the solenoid could also operate the score change.
you gotta make the gear ratio big enough to reach from the top of the board to the bottom with only a quarter turn of the knob. would make the game alot easier to play.
they need to level the table. you should include a built in level for the top left and bottom right corners, with adjustable feet. well... that's what I would do.
that was great!! but jw. wouldnt it be easier if u made the wheel a bit more sensitive? cuz it looked really slow, like u had to twist ur wrist too much to only go so far. i guess its a suggestion.
its a great idea.. although i think it work better as an air hockey concept to really get closer to pong physics... plus the table they were playing on was slanted >:|
@kasstzam i was thinking this exact thing. if you just had a slight incline either side of the line, you wouldn't have that "not reaching the bumper" thing, without the ridiculous speed problems you'd get with kicking up the bumper power.
I want to buy this!!! Now!!!
dmassive 1 week ago
Outrageously cool!
LightStopStudios 2 weeks ago
SHUT UP AND TAKE MY MONEY!
XtremeMachinez 3 weeks ago in playlist More videos from oskay
This has been flagged as spam show
It would be cooler if you digitized the scoreboard a la air hockey and added like a magnetic ball server of some sort.
Beer1584 1 month ago
I think this is possibly the very coolest thing I have ever seen!
charlieflint 3 months ago
You could slant the table toward the the paddles and increase the push the paddles use on the ball
ZWIGEDgames 4 months ago
MAYBE THE SIDES NEED A KICKER LIKE THE SLINGSHOTS IN A PINBALL...THE KICKERS JUST ABOVE THE FLIPPERS TO GIVE THE BALL JUST A LITTLE KICK WHEN HIT :) LOOKS GOOD
imjustakleena 8 months ago
Thumbs up for a dream coming true!!!
Jusbertigusberti 10 months ago
OMG your so f++kng nerds.... sorry but is true
simssity 11 months ago
do you plan to sell this?
MrPretzelStickz 1 year ago
You could curve the plate :) Really good :)
etarapidopa 1 year ago
Dude your stuff is SO DAMN AWESOME.... they should sell this stuff. instead of those shitty plastic pokemon thingies which will break in 2 minutes
vuur150 1 year ago
:P :D
caramelosspeed 1 year ago
UPLOAD VID HOW TO BUILD ONE!!! I WANT TO BUILD ONE!!!
TheKshow101 1 year ago
if you make the table in the shape of a roof then the ball would always roll down....very very low angle required though like 1 or 2 degrees so the ball doesnt have a hard climb.....make the peak the centre line
awesome stuff
hez1919 1 year ago
@hez1919 The second version, which we made several months ago, does have a slope, and works much better.
oskay 1 year ago
@oskay awesome sauce :)
hez1919 1 year ago
I should try this, but with a modified air hockey table. Great work on the tabletop by the way.
dinmagic 1 year ago
how about bumpers along the top and bottom?
WTFA54 1 year ago
@WTFA54 The spring strips on the top and bottom are extremely effective; now that the ball no longer stops in the middle, you can get two or more bounces in a pass.
oskay 1 year ago
That is wonderfully clever. I hope you guys are going to market that thing.
jim1088 1 year ago
it could be better if it had some kind of "air bag" technology, like air hockey or something
ZXRulezzz 1 year ago
this is probably the most amazing pong game on the planet...if it were coin operated then this would make TONS of money
REpsycho 1 year ago
What it needs is a playfield that isn't flat, but with each half slightly sloped toward that player's paddles, like a very shallow inverted V.
EalaDubh 1 year ago
@EalaDubh The current version does, and it works quite well.
oskay 1 year ago
three things that would make this amazing...
Gaaraofthesandcastle's idea of the "air hockey" style of having the air jets
two, have it as an automatic scoring system, not a huge deal if not, just would make it less of a hastle to always be turning the dial for every goal
third, instead of the knobs to turn it, have it as a "stick" on each end respectively to control the flipper (ex. the same way you control the goalie on most table hockey games)
love the idea though, I'd totally buy it!
StAnger1619 1 year ago
Amateurs...
02stv 1 year ago
Could you PLEASE send me a copy?
pixopusher93 1 year ago
lol xD funny
Ashocka1 1 year ago
maybe a lighter weight ball?
analogWeapon 1 year ago
does it activate the bumpers(the flip from the white paddles) automatically or do you have to push a button?
cksugdad 1 year ago
@cksugdad It's automatic.
oskay 1 year ago
that's wicked.
Stronith 1 year ago
I would but one
DumberCheese 1 year ago
awesome! what would be cool is if you just added a little piston on each side for auto launching
elpyrodraco 1 year ago
i wiiish i had thattt.
FiaAppolus 1 year ago
that bitch got owned
AndrosForever 1 year ago
Well, what if the circle in Pong isn't a ball, but a disc, or a puck of some sort, then it would be very similar to a limited form of Air Hockey, which in itself is a limited form of hockey. The limitation is that you can only move the paddle in 1 dimension as opposed to the 2 in Air Hockey.
Air Hockey would over come your issues with the ball slowing down, the paddles not bouncing hard enough and gravity having a significant influence.
Of course this is more interesting.
zephiriusjixx 1 year ago
why not make the glass like a concave sort of bend
mbs306 2 years ago 3
epic laughter!!! 1:18 !!
icecream400 2 years ago
Keep this stuff coming.
datingwomensex 2 years ago
i will pay you so much money for this.
TheFlyestNerd 2 years ago 21
This comment has received too many negative votes show
Both have epic fail nerd laughs..
l2ic3 2 years ago
cool
kleindamv 2 years ago
öööö :p
KnightOnline2006 2 years ago
While you're at it, yeah, America could use a second generation Space Shuttle replacement vehicle, okay. I got the abandoned warehouse and and all the Mexican laborer you'll need. Chop-chop, get a move on, the future of the Internet depends upon you.
xxxMrSuspendedxxx 2 years ago
heres an idea, make the paddles kick a tiny bit harder, and make the center of the table a slightly high point so you dont get anymore dead balls.
cbass5511 2 years ago
keep it up
spider13909 2 years ago
next step: table galaga
oldkingcoal207 2 years ago
i think it looks really cool but just a tip to make it look even better cover up the sides so you don't see the the mechanism that kicks the paddle also a auto sever would be nice other than that it seems like something i'd buy
totemtrouser 2 years ago
it would slide better and not get stuck in the middle if you used an air hockey table (maybe modify it a bit)
steven101x1 2 years ago 2
Perhaps you should give the slightest angle to each side of the board going towards the paddles so it doesn't stop but it can still easily make it over the bump in the middle form slopping them
colorwheel6 2 years ago 6
Or a different ball with more rebound effect. Seems like that's a heavy stainless steel ball-bearing. And yes they do need some slope, lol.
xxxMrSuspendedxxx 2 years ago
pointless?
Sebahz87 2 years ago
make the walls just like the paddles,one big bumpbar. itll give it the fast action of real pong as well as fix your lacking ball attack
julescicle 2 years ago
i like it:P
TheNamnamnam 2 years ago
HEY I THINK UR TABLES UNEVEN!! lol just kidding
eddyray24 2 years ago
xbox 9000..:) at age ten I played the original game of this..was so amazing then!
creation343 2 years ago
Nobody gives a fuck. Do you actually think people care if you played the original game of this when you were ten? You must be a stupid American.
peacenlove4every1 2 years ago
@peacenlove4every1 well holy damn your name must have been made while you were high or something and if you werent high then it could be something else but your name seems to be a joke to what you said. next time just dont be a dick about it you must be a stupid "non" american
midgets111 2 years ago
@peacenlove4every1 Dude, go lie down in a hole and die please.
Bertolucci 2 years ago
stupid american is a pleonasm. learn your english.
zadirion 2 years ago
Comment removed
cbass5511 2 years ago
LOLOLOLOLOL Your comment is both hilarious and very true. BTW, I bet most Americans won't understand your comment.
peacenlove4every1 2 years ago 2
oh, and so is fat american and a few others just so you know and avoid using them.
zadirion 2 years ago
THE MORE YOU KNOW! *star inexplicably trailed by a rainbow shoots across the screen*
pantslesswrock 2 years ago
@peacenlove4every1 haha And do you think anyone gives a fuck that you give a fuck? You must be a pompous European. BTW you fail as a troller.
cbass5511 2 years ago
HI! You missed it! I'm from Hungary! I'm rally happy you answered!! :)
I wih you had a nice day like mine..cheers :)
creation343 2 years ago
i want one now!!!!!
roboman32 2 years ago
PLS do space invaders next!
dontfearthedark 2 years ago
You should really sell that like world wide I would SO buy that.
MCH445566 2 years ago
I'm not sure if you plan to make this into something big, but I do have an idea. Maybe the board could have a very slight weight imbalance in the center; so that if the marble begins to roll to a stop, the imbalance will very slightly tilt the board so that it continues rolling in one direction.
This is wicked awesome though. Great job!
IceHedge 2 years ago
@IceHedge
way to be a queer from new england
Kegan923 2 years ago
I don't get it. Does queer mean something else in New England?
IceHedge 2 years ago
my advice.. just lightly slant the table in the middle so the ball will not stop so much
thekidofmany 2 years ago
thats what I was thinking.
this is awesome, Id so buy one of these, would make for a great drinking game heh
razieltalos 2 years ago
looks lovely!
Mutantpk 2 years ago
this table is not good level
bestamerica 2 years ago
That should tilt
monyutto 2 years ago
haha
Unbekannt1900 2 years ago
GoodJob!
CCXCI 2 years ago
AWESOME! I would buy that. Now do Arkanoid!
RowanLives 2 years ago 2
wtf you guys it's not fail, it's awesome
seriouslyWeird 2 years ago 3
You guys rule.
ixat00 2 years ago 3
duuuude that thing is awesome
Gonzomatic6936 2 years ago 2
Am I slut? Whenever I stucy biology i want to have sex...
chiquiboose83 2 years ago
how does that mechanism on the paddles work?
the part that shoots the ball.
63NY1 2 years ago
it automatically launches the ball?
xStalkerxx 2 years ago
NERD ALERT!
Got2HaveBud 2 years ago
not bad.. quite cool..
LKYseb 2 years ago
It reminds me these table games:
pushmania . com/flash-game/air-hockey
AO682849 2 years ago
in the era of touchscreens this looks little .. of
iTravelHD 2 years ago
Was a good effort, but all in all.... fail =\, looks awsome though but, it just doesnt work lol
airforce525 2 years ago
dude u should try tabletop halo
andreiromanian 2 years ago 4
i had this idea but you beet me to it
sholtob 2 years ago
nice idea.
alpha59assassin 2 years ago
Oh yeah... f**k my Xbox 360... I want TABLETOP PONG!!!
x2b0y 2 years ago 33
why don't you bend the plastic so that the centre portion is higher than the 2 ends? =)
womenkiller007 2 years ago 9
you should go 50 years back in the past.
ViliPlayer 2 years ago 3
you guys are about 30 years late on this one...lol
GamerGuy51 2 years ago
haha awesome
rafidiisme 2 years ago
An idea..maybe if the tables where magnetic each side pull the ball maybe this would help with not letting the ball stop mid way..
gjrm20 2 years ago
that sounds like a good idea to me
Junr55 2 years ago
Maybe the edges on the top and bottom should have kickers too? Just so when it bounces off the sides it keeps going...?
vaati000 2 years ago
Maybe you should pitch the center of the game area a hair.
rj00001 2 years ago 6
you should add air like in air hockey and level it. And add an electro magnetic field that attracts the ball to both ends.
CTAB100 2 years ago
what if maybe there aws a way to make it more sensitive or something?
mikehanchoguy 2 years ago
My consensus would be giving the paddles a little more kick in them, putting in a level and easy-adjusting legs, and making the board at a slight incline with the middle of the table being more elevated than the goal areas. That way they are in constant motion, and with the extra power they wont fall back on the same side after being hit.
THX1449 2 years ago
aliitle sound would make this awesome
BetaBug9229 2 years ago
I think you should put a sort of joy stick onto the little wheel to make it easier to spin.
Other then that it looks fun!
AyDuM 2 years ago
@AyDuM i think they thought that through, because if they did that, it'd be just like playing atari, except your doing it on a table instead of a tv screen. but i do agree. should've made some sort of a better grip, if not in the process.
NASCARGUY51139 2 years ago
You guys are aware that the original Atari system, and Pong, were controlled by a paddle controller, that was basically just a rectangle with a wheel on top of it? Just checking.
pantslesswrock 2 years ago
@pantslesswrock: uhhh, yeah. but what they did here is called modernizing. and therefore my point was they should have created something more modern as opposed to the original atari paddle that had the wheel to control the "paddle" that actually hits the ball.
NASCARGUY51139 2 years ago
Well, I would argue that what this is isn't modernizing. In fact, it's the opposite. It's taking a digital game, and attempting to transpose it into a completely non-digital real-world game that doesn't necessarily look like the original, but is still the same game (as opposed to the other real-world pong that looked more like the video game). Also, the knob control method seems like an easier way to make it. I'd like to someday see real-world pong w/o electricity.
pantslesswrock 2 years ago
Bigger paddles may help. Seeing as when the ball hits the paddle at an angle it slows down too much to make it to the other side.
dragonsofeldest 2 years ago
id buy it
TheMrJobi 2 years ago
thats cool!
FizzMeMadBoy32 2 years ago
guys make it so that it tilts a little at the middle line in an upside down v shape so the ball doesn't stop rolling, but its still great
Divinewrath007 2 years ago
@Divinewrath007 That would work but the momentum would go screwy.
BladeNKrumpets 2 years ago
yeah, but then a slow ball will actually come back down the slope and return to the player =X
xgotarox 2 years ago
great idea
IBeCeRTiiFieD 2 years ago
even though the games kinda outdated
its still original and fucking kickass
awesome.
iamsnowmanful 2 years ago
what kind of laugh was that 1: 30
andrewhuang316 2 years ago
1:17 laughter nerd!!
jjdize 2 years ago
good invention, maybe if you apply (crazy glue) some sort of a magnetic rod at each end of the player maybe the metal sphere would make it to the other side. lol.
dannoyer 2 years ago
if you incerease the size of the paddle by a little, the game will last longer. i see where the ball gets hit by the conner of the paddle but with out enough force.
1102071 2 years ago
@1102071 thats what she said
jameswm69 2 years ago
@jameswm69 o sorry that, i dont go thourgh and read all the comments about what others have wrote. my bad if i was trying to give a little help to these people
1102071 2 years ago
@1102071 yeah your right, the paddle should have a curved edge rather then 90 degree angle corners
dee1392 2 years ago
magnifique ! énorme etc etc.... du lourd :D
goalagron 2 years ago
absolutely one of the coolest things ever! how can i get one of those?? i have a three legged dog named Lexy and im posting videos of her and her life as a tripawd so check it out when you get the chance
Tripooch 2 years ago
Excellent! Now put in a gutter on each end to catch the ball when it passes the bat, angled so the ball rolls down to the bottom and is then re-fired onto the playing field with a solenoid. The switch that operates the solenoid could also operate the score change.
Eljenxo 2 years ago
you gotta make the gear ratio big enough to reach from the top of the board to the bottom with only a quarter turn of the knob. would make the game alot easier to play.
Dirkzero1 2 years ago 2
boaaaa
dz2ax 2 years ago
I was wondering who invented this atari game....
ripmeanewon 2 years ago
Nolan Bushnell
natecorbitt 2 years ago
very funny video, I love it !
sewasd900 2 years ago
прикольна)
Quzoxe 2 years ago
Very original =D
LaMillorMusica 2 years ago
По уровню надо было ставить!))
rayan11II 2 years ago
Super cool !
DonElgazo 2 years ago 2
bullshitttttttttttt!!!!!!!!!!!!!
baerinho3 2 years ago
cool :)
incredingo 2 years ago
1:27 FAIL hahahah
xWeStC0aSTx 2 years ago
Put some rubber bumpers on the sides...that might help the speed when it's a slow roller
jay2thaudy 2 years ago
Nice!! Good job folks!
chulk607 2 years ago
I love the nerd talk!!
spicedclay 2 years ago 2
love this low tech version!
mrnick1234567 2 years ago
Забавно!!!)))
Gekatonhir 2 years ago
wow,awesome
hey,watch 'captain planet' on my channel..thanks
Adly91 2 years ago
I want one! I will pay $30 right now!
car45j34 2 years ago
If you warp the board slightly, the ball won't get stuck.
truthvirus 2 years ago
they need to level the table. you should include a built in level for the top left and bottom right corners, with adjustable feet. well... that's what I would do.
frosty1433 2 years ago
too much like air hockey
aznlilhero 2 years ago
Balance and sharper controls. Nice $
rawgue 2 years ago
lol
do you create this machine?
nelbeatb0xer 2 years ago
1.16 LOL
1318887 2 years ago
Needs a lot of work. Could be cool, though.
DudeHuge 2 years ago
Yes the wheel sensitivty needs to be sharper. But seriously good, you could sell those things o.o
Tommm279 2 years ago
>Yes the wheel sensitivty needs to be sharper.
One turn covers the whole play range-- I think that's less than the original PONG. :)
oskay 2 years ago
Epic
Chillingfrost 2 years ago
IT'S COOL BUT ITS NOT PING PONG DUMBASS
INTERFAMOUSSECRETS 2 years ago
@INTERFAMOUSSECRETS...
epic fail
frosty1433 2 years ago
maby you should make it like air hoky...
ClayDemond2300 2 years ago 2
zzzzzzzzzzzzzzzzz
ezefal 2 years ago
that was great!! but jw. wouldnt it be easier if u made the wheel a bit more sensitive? cuz it looked really slow, like u had to twist ur wrist too much to only go so far. i guess its a suggestion.
ranger2613 2 years ago
Está buenísimo. Debería tener algo así como unas palancas de caña de pescar a cada lado, para que se pudiera mover más rápido, ¿no?. 5 estrellas.
viejoteca89 2 years ago
rly nice althought idk about the turning wheel thing
EandDmovies 2 years ago
Pong was originally controlled by a wheel.
ShawnMcCool 2 years ago
Brilliant - when can I get one? :D
hotrodzombie 2 years ago
I want one, awesome idea!
tomdotcom88 2 years ago
its a great idea.. although i think it work better as an air hockey concept to really get closer to pong physics... plus the table they were playing on was slanted >:|
afrocass 2 years ago
i would like to pre-order 2 please (:
OnTVads 2 years ago
thats awesome
Bigbadmeenie2 2 years ago
стол кривой
Kice02 2 years ago
If you slightly angled each side, the ball would roll better...
kasstzam 2 years ago
@kasstzam i was thinking this exact thing. if you just had a slight incline either side of the line, you wouldn't have that "not reaching the bumper" thing, without the ridiculous speed problems you'd get with kicking up the bumper power.
Iananan 2 years ago
LOL
Impact2us 2 years ago
holy crap! i want one :P
kakureru 2 years ago 2
Звук прикоольный)
muskadimakof 2 years ago
Too fast! I can't understand anything!
JunkerSchmidt 2 years ago
thats pretty impressive
RenegadeRaver 2 years ago
awesome!!!! can you please leave shcematic of it!!!! i wouyld love to make one!!!
holt3138 2 years ago
qué estupidez!