Not bad, but pretty vague on some of your points. Bearing in mind that many folks who are looking at these videos for instruction know very little, you need more visual aids. SHOW the damaged ignition cables, cracked vacuum hoses, etc. And on charging systems; Elaborate for people. DC volts are only part of the equation. Not enough amps or more than 0.5VAC is a problem, the former requiring more than a $10 DVOM to check.
hay i really need to no where the crankshaft sensor is on a 1999 camaro 3.8 can u help me out ????? my car just wont start it will turn over all day long i allready put a fuel pump on
It seems to me that a certified master technician would know there is no computer that will tell you a vacuum line is off... I dunno... the entire video is misleading... where is the part about finding an engine problem? Not much help, not much good information.
got a problem with my astra 1.7 cdti. No turbo and a rattling nois coming from near the engine and the left side. Also were is the turbo located? and how much would cost to repair?
I have a 2005 ford 5.4 Gas superduty with 21,450 miles and my check engine light is on. The code says p0174 running Too lean. Could it be the MAF sensor? Do you know of a common problem with this on these trucks? Any help would be great.
What is the light see thur test? I checked the filter looks clean. How do you check the injectors? Thanks for your help. The truck does run fine though!
these expert village videos are a good idea and all, if only they wernt done by such a bunch of douchbags. I hate the way most of em are done in 100 parts, and most of them really dont tell you anything
ok , im having a huge problem with my 99 maxima ,it wont start or i have to push it very hard to start , after 2 weeks in nissan shop they told me that it needs new ECM ,i bought one but it didnt solve the problem then they told me that the flywheel is bad , i took it to another michanic who told me that the timming chain , but i noticed that it always start normal in the morning (cold) , and once it start the RPM flacuate for couple time beetwwen 1 and 2 , so somebody suggested it might be MFA
This has been flagged as spam show
Excellent !!
Vital Electrocomp PCB CONNECTORS, TERMINAL BLOCKS, PCB FUSE HOLDERS, VITAL CONNECTOR, SCREW TYPE TERMINAL BLOCK, PUSH FIX CONNECTOR, COMBICON, PLUGGABLE CONNECTOR, PLUGGABLE TERMINAL BLOCK, BARRIER TERMINALS
Google Vital Connectors
VitalElectrocomp 4 days ago
i found the problem, my blinker fluid was low.
fallenshawn 1 month ago
People come to me cuz they dont even have a clue how to pop the hood. Plus how else are you gonna erase the check engine light? Gotta hook it up.
nachi7982 1 month ago
thank you sir
helenamen 4 months ago
How many of you have an engine problem?
Pontiac2322 5 months ago
nice video..!
snautomart 8 months ago
Not bad, but pretty vague on some of your points. Bearing in mind that many folks who are looking at these videos for instruction know very little, you need more visual aids. SHOW the damaged ignition cables, cracked vacuum hoses, etc. And on charging systems; Elaborate for people. DC volts are only part of the equation. Not enough amps or more than 0.5VAC is a problem, the former requiring more than a $10 DVOM to check.
10MickeyMouse 8 months ago
nice guy but looks so sleepy , oh u must be so tired , i'm sorry bro !
3131561 9 months ago
This is interesting. I have 13.09 volts with the car off. 1996 Grand am 4cyl. Is this good over maybe over charging.
Rickxx8 9 months ago
hay i have a mercedes c180 1994 w202 the car engin is missing wen driving can you help me plz
skibb19 11 months ago
I'm appreciat if u late me now how to adjust the valve clearance of 1988 model Honda civic, G,M.Murad
AbuSalim36 1 year ago
hay i really need to no where the crankshaft sensor is on a 1999 camaro 3.8 can u help me out ????? my car just wont start it will turn over all day long i allready put a fuel pump on
amberkayliee 1 year ago
hay i really need to no where the crankshaft sensor is on a 1999 camaro 3.8 can u help me out ?????
amberkayliee 1 year ago
It seems to me that a certified master technician would know there is no computer that will tell you a vacuum line is off... I dunno... the entire video is misleading... where is the part about finding an engine problem? Not much help, not much good information.
Styxxed 1 year ago
Comment removed
heartlessvietboy 1 year ago
@Styxxed He said look or listen for the vacuum leak.
he didn't say the computer would tell you.
Rickxx8 9 months ago
@Rickxx8 He said that listening for the vacuum leak could save having a garage hook up a computer to tell you the same thing.
Styxxed 9 months ago
This has been flagged as spam show
Need to marry you Be Naughty girls benaughtyman.info
nirmanianjali 1 year ago
Holy Cow! Looks like he just got up from sleep!!
ForgottenEasternJews 1 year ago
fuck video ads
PPNeefBuck2185 1 year ago
Comment removed
ckbabyyable 1 year ago
This has been flagged as spam show
Lady GaGa is the determined invention of art school graduate Stefani Germanotta - Naked Lady Gaga. C0000M -
Morris7830 1 year ago
Hi Guys,
got a problem with my astra 1.7 cdti. No turbo and a rattling nois coming from near the engine and the left side. Also were is the turbo located? and how much would cost to repair?
AK43ver 1 year ago
Thanks alot for your help
you are so knid
egylink2009 1 year ago 6
Strange ticking noises? Dang, if there is a strange ticking noise I'm gonna get the hell out of there before it explodes!! Nice video. Informative.
AyCorundum 1 year ago
Thank you
carmotonline 1 year ago
I have a 2005 ford 5.4 Gas superduty with 21,450 miles and my check engine light is on. The code says p0174 running Too lean. Could it be the MAF sensor? Do you know of a common problem with this on these trucks? Any help would be great.
rumerboyz 2 years ago
@rumerboyz
pull your air filter . . .
if not heavy do a light see thru test . . .
air filter not a problem . . . check you injectors . . .bet number 1 cyclinder has a problem injectod . . . 2005 is likely closer to 100 K miles.
LongHairedSally 2 years ago
What is the light see thur test? I checked the filter looks clean. How do you check the injectors? Thanks for your help. The truck does run fine though!
rumerboyz 2 years ago
these expert village videos are a good idea and all, if only they wernt done by such a bunch of douchbags. I hate the way most of em are done in 100 parts, and most of them really dont tell you anything
Dannyboy3825 2 years ago
so may the MFA prevent the car from starting ??
please help, i spent 900$ so far at nissan dealerships , and they cant help me >
mahdyk 2 years ago
yeah try a 2nd hand MAF
1nazchan 2 years ago
ok , im having a huge problem with my 99 maxima ,it wont start or i have to push it very hard to start , after 2 weeks in nissan shop they told me that it needs new ECM ,i bought one but it didnt solve the problem then they told me that the flywheel is bad , i took it to another michanic who told me that the timming chain , but i noticed that it always start normal in the morning (cold) , and once it start the RPM flacuate for couple time beetwwen 1 and 2 , so somebody suggested it might be MFA
mahdyk 2 years ago
wow man i work in the industry and most people cant identify these problems even if u told them all of these things
tmaley613 2 years ago
wow, that was almost helpful.
greenbike11 2 years ago
14 volts idiot
televizorcarpati 2 years ago
WRONG
tmaley613 2 years ago