Free inexhaustible energy is real!But the Oil companies want these technologies unknown to the masses,Get a motor that needs no gas or electric input at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!
Thank you very much. These devices are really cool and I think we can learn a lot from them. Jonnydavro is the leader in this field and I am glad he shared his device with the rest of us. You should make one of these, they are fun to watch while they are spinning and charging your battery.
You and I think alike. It is a challenge to get these things to run but I get a big kick out of it. Alot of fun. I like you "pan lid" base for the electronics. What we are doing reminds me of the movie "Those magnificant men in their flying machines". There were all kinds of strange airplane designs in the movie---all of em flying. These circuits we do are like that. They all work in their own strange way.
Thank you. I made another video and posted it using a flat plate and it works better. I also used a 12 volt bat. as I noted what you said in your video. I still get the "X" wobble but Jonnydavro believes he solved that by selecting magnets that have a more pointed end rather than blunt. (like mine) I am going to find some. I love that movie and I agree. Our devices may look a bit odd or strange but they work. Thanks for your comments.
on my bandsaw the wheels are higher in the center and the blade finds its way to the top, soooo, try reversing your top, so its high point is in the center, will prob be hard to get going but maybe it will work the same as the bandsaw blade.
That is an interesting suggestion. I know about the effect you are speaking of with the band saw blades but never considered that. I posted another video right after this one where I changed to a flat (non-concave) surface and it stays in the center pretty well. Thank you for your idea though, I will consider that.
Well, 2 years ago, I didn't know much about this stuff at all. I have learned a lot from my friends over at Overunitydotcom forum and here on youtube. Everyone is very helpful and they share a lot of information. Without them, I would still know very little. Thanks.
This has been flagged as spam show
Free inexhaustible energy is real!But the Oil companies want these technologies unknown to the masses,Get a motor that needs no gas or electric input at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!
lutherarao 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies are doing everything in their power to stop these
information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the
revolution!
hungarylnnjsd 1 year ago
Hi Bill,
Very nice tidy setup, using a discarded saucespan lid is cool thinking, and recycled to boot lol.
Shave a bit off the base of that black thingie to give it a more pointy end and I think it will behave itself.
jim
daddyjimau 2 years ago
Jim:
Thank you very much. These devices are really cool and I think we can learn a lot from them. Jonnydavro is the leader in this field and I am glad he shared his device with the rest of us. You should make one of these, they are fun to watch while they are spinning and charging your battery.
Bill
Pirate88179 2 years ago
You and I think alike. It is a challenge to get these things to run but I get a big kick out of it. Alot of fun. I like you "pan lid" base for the electronics. What we are doing reminds me of the movie "Those magnificant men in their flying machines". There were all kinds of strange airplane designs in the movie---all of em flying. These circuits we do are like that. They all work in their own strange way.
Lidmotor 2 years ago
Lidmotor:
Thank you. I made another video and posted it using a flat plate and it works better. I also used a 12 volt bat. as I noted what you said in your video. I still get the "X" wobble but Jonnydavro believes he solved that by selecting magnets that have a more pointed end rather than blunt. (like mine) I am going to find some. I love that movie and I agree. Our devices may look a bit odd or strange but they work. Thanks for your comments.
Bill
Pirate88179 2 years ago
on my bandsaw the wheels are higher in the center and the blade finds its way to the top, soooo, try reversing your top, so its high point is in the center, will prob be hard to get going but maybe it will work the same as the bandsaw blade.
yar
harpbloke 2 years ago
That is an interesting suggestion. I know about the effect you are speaking of with the band saw blades but never considered that. I posted another video right after this one where I changed to a flat (non-concave) surface and it stays in the center pretty well. Thank you for your idea though, I will consider that.
Bill
Pirate88179 2 years ago
nice man nice! :D 5/5
37474748 2 years ago
Thank you. I have more to do to get it right but, it is a start.
Bill
Pirate88179 2 years ago
oh yeah... you got hell of allot more knowledge about that stuff then me :) i just watch and wonder whats happening :D
37474748 2 years ago
Well, 2 years ago, I didn't know much about this stuff at all. I have learned a lot from my friends over at Overunitydotcom forum and here on youtube. Everyone is very helpful and they share a lot of information. Without them, I would still know very little. Thanks.
Bill
Pirate88179 2 years ago
yeah... youtube has helped me allot... i wouldn't know to much without my friends here either! keep up the awesome videos man! :D
37474748 2 years ago
Bill: Cool! I love your creative use of the pan pot cover!
nonesounique 2 years ago
Thank you. Yes, I find all kinds of stuff that can be used for something else. Makes it even more fun and sometimes more of a challenge.
Bill
Pirate88179 2 years ago