Wow, they didn't even check to see if they're cutting where the cross beam lies, scary. But I guess they trust Alpine so... I guess the bracket should be outside the headliner for non-sunroof vehicle and for those that have sunroof with sunshade bracket, partially inside?
Man, even though I can do all that work, I rather have someone do it for me. But cutting out the headliner scares me because one wrong cut and it will look so ugly. Power stuff is easy but I just think that it should be done by guys who does it everyday like 10 cars or more at a time. Now, I would make sure that the power cable is soldered and heat shrinked, not crimp tubed. And I do not like using electrical tape where I can avoid it.
hey bro I have a 15" i put in a lincoln towncar.. it shows good with the engine off but once I crank the car up the flipdown gets alot of distortion. we tried moving the ground and power wires to diff locations and still the same thing.. do you think it could be the rca's? what would you recommend trying? thanks for your time
How about splicing the overhead monitor power / ground wires to the radio's constant, accessory, and ground wires. Then splice the wires from the monitors dome light to the cars dome light wire?
@Hidframe Because most people take thier cars to a shop to get them serviced anyway, why have it accessible to the average consumer when they don't even know what a fuse is.
Wow, they didn't even check to see if they're cutting where the cross beam lies, scary. But I guess they trust Alpine so... I guess the bracket should be outside the headliner for non-sunroof vehicle and for those that have sunroof with sunshade bracket, partially inside?
peterkim1999 3 weeks ago
I Wish All Cars Had The Same Headliner Frame As The Renault Scenic!.....
a875089 1 month ago
How do you determine where the roof beam is where the headliner needs to be cut? That's my biggest worry as I have a sunroof also.
peterkim1999 3 months ago
Man, even though I can do all that work, I rather have someone do it for me. But cutting out the headliner scares me because one wrong cut and it will look so ugly. Power stuff is easy but I just think that it should be done by guys who does it everyday like 10 cars or more at a time. Now, I would make sure that the power cable is soldered and heat shrinked, not crimp tubed. And I do not like using electrical tape where I can avoid it.
kc2zxl 5 months ago
hey bro I have a 15" i put in a lincoln towncar.. it shows good with the engine off but once I crank the car up the flipdown gets alot of distortion. we tried moving the ground and power wires to diff locations and still the same thing.. do you think it could be the rca's? what would you recommend trying? thanks for your time
miggy254 5 months ago
Im about to put a 15" in my 08 dodge ram... anybody got a list of thing I will need! Send me a message
jwgrz2614 6 months ago
Why didnt u use the doom light for the power
jongotti2001 10 months ago
@jongotti2001 Because they are not designed for that extra load. The only proper way to do it is run a new line to the battery protected with a fuse.
noobtonthe3rd 6 months ago
This has been flagged as spam show
Don't try it at home!
ricardomrp 11 months ago
This has been flagged as spam show
Don't try it at home!
ricardomrp 11 months ago
just installed a 7" flip down and a ps2 in my car its really simple just a faf with the headliner but it helped
mikelovesbass09 11 months ago
I wish all car project videos were this good.
scottwilkins 1 year ago
Where did you get the casing? My car has a concave strip running down the center of the ceiling and I need a proper casing to fit it
moz1705 1 year ago
This has been flagged as spam show
I just sent you a message.
jaydee427 1 year ago
How about splicing the overhead monitor power / ground wires to the radio's constant, accessory, and ground wires. Then splice the wires from the monitors dome light to the cars dome light wire?
jaydee427 1 year ago
@jaydee427 hey can u tell me how to install the easy way plzzz?
boo102308 1 year ago
Why do some car manufacturers make it so insanely complicated to get to the fuse box?
Hidframe 1 year ago
@Hidframe Because most people take thier cars to a shop to get them serviced anyway, why have it accessible to the average consumer when they don't even know what a fuse is.
MagicalMrSkylar 1 year ago
great video guys, very impressed
jobonilla88 1 year ago
great video!
dyoooooooooon 1 year ago
Can you not just make a direct connection from the battery and fit a toggle switch to roof cloth beside the monitor?
09mrcannon 1 year ago
@09mrcannon i was thinking the same thing it would have been a whole lot easier
d77543020 1 year ago