Trailer Hitch Removal

[uscgjake22]

Lol why the hell was this a recommended video?.. And the slow motion ass shot?..  That shit must have been rusted in there pretty good

[alivingspartan]

lol at the slow motion.

[hunttonasket]

i like it

[Tricyklist]

A redneck's idea of tree hugging? This one may still suffer from being "ringed" by the chain. A flat, woven lifting strop would have been much kinder.

[monsterman27]

im gonna have to do the same thing with my trailer hitch. hooked up to my other truck wih no result so i need a tree now and a sledge i guess. Iv been putting pb blaster on it, so maybe its soaked in more and it wil come loose.

[daddytech]

that's why you either grease them up or pull them out immediately when you are done with them

[MrShutyourdamnmouth]

fukin trailer hitches ! almost have to take them out after each time you use them

[rehabib2]

Ever hear of WD40 ?

[CandidKeychain]

NO Next time move to CALIFORNIA!

[HateGovernment]

Next time,  oil it first.

[kingVkong]

damn...how the hell did you get it on in the first place???

[SCHMULBACH22]

ice prob made it stuck

[anantach]

no fun!!! 

[hydrocutty]

thats a fun way to do it lol-soakin the shit out of it with pb blaster woulda got it out ;) i probably still would of did it this way,the easy way is never the funnest lol

[01928374655]

why not just unscrew it?

[dondondonman]

thats not a fucking truck its a suv never cann it a truck agen you fucking farm boy wonabe

[bugmasta23]

@dondondonman Cann?? Really? Did you mean Call? The "L" and "N" keys aren't even next to each other. And by the way, don't you EVER call a square a rectangle!!!

[dondondonman]

@bugmasta23  lol ya i did mean call and i didint say anything about a square J.A.

[dondondonman]

@bugmasta23 why the hell would i do that its not jack wagon lol and dont feal to bad im dyslexia is geting me alot a heat hahahahaha but i can take it cuz i can rember to pull the pin out the hitch hahahaahahahahahahhaahahahahah­ahahaahhaahahahahahahahahahaha­hahahahahahahahahahahahahhhhah­ahahahahaahahahahahahahahahaha­hahaahahhaahahahhahahahahahaha­hhhaahahha breeeeeth ahahaahahahahahahahahahahahaha­hahahahahahahhaahhahahahahahah­ahhahahahaahahha......ect.....­.ect you get it ...

[BattyBitz]

@dondondonman I'm dyslexic, but fuck, I can spell and make a little sense. Worse case scenario is my sentences are poorly structured and can be hard to make sense out of.

Anyway, I'm resorting to the tree and the chain for my hitch tomorrow. Wish me luck!

[dondondonman]

@BattyBitz lol ha ha ha ha ha ok rember to pull the pin and put the chan lower on tree and get a bigger hammer redy lol and maby some jb80 and a blow torch lol or knowing the way u guys do stof just use some c4

[BattyBitz]

@dondondonman Hahah, I'll remember that. If I do anything too crazy I'll make a video for you!

[jrmeyer052]

@bugmasta23, But a square is a rectangle...

[NerdForMIT]

@jrmeyer052 A+ in Geometry?

[smirnofowner]

@bugmasta23 Go easy on him, i think hes not all here...... check his channel.

[motogmc10]

@dondondonman

Learn to spell first before you talk shit dildoman. You sound like the farmboy to me. What the fuck do you know anyway? You have gay ass cartoons on your channel. Just because its not a pickup truck doesnt mean its not a truck . Its an S10 Blazer which shares all the same components as an S10 Pickup. When suv's first came out , do you think they called them suv's? Dont think so. Shut your cake hole and go watch some more damn cartoons loser. COOL VIDEO BUGMASTA

[blampa]

@dondondonman Dildoman, where the fuck did you ever go to school? I only ask because you could probably sue them for millions for dereliction of duty; or atleast get your school fees refunded. What kind of an illiterate dumb-fuck would presume to lecture others on the names of things whilst simultaneously committing spelling and grammatical crimes against the english language? Take your two inch killer out of the neighbours cat and for Gods' sake man, pick up a dictionary.

[dondondonman]

@blampa oelwein high school and im for not providing me with an education cuz i that stuck me in a room by myself and gave me papers to fill out all day no teachers in room just me same in med and 5 , 4 you dont even know how hard it is to get a job when your reading and righting skills are at a 3ed grade lvl

[Kawasakiforlife7]

@dondondonman what do you mean by "cann" "agen" and "wonabe"? because none of those are words.... and why cant he call it a truck? everyone calls suvs trucks. and people in the offroad community call quads bikes. no one is that technical. im a mechanic and i refer to suvs as trucks 60% of the time.

[Kawasakiforlife7]

@dondondonman and actually, by rights, a blazer is a truck as it used a truck chassis.

[dondondonman]

@Kawasakiforlife7 but ok so then is a E350 clube wagon VAN! a truck cus it uses a 1 ton truck frame all suvs are a truck frame with a van like body stile an suv is for look at me look at me i can off rode now or look i got a kid in soocer and a truck dos real work like haling towing if it dont have a bed for cargo its not a truck and if its a short bed you wasted your money useles youl make 6 lodes to mach the one you can get in a full 8 ft box

[Kawasakiforlife7]

@dondondonman you talk and spell like an inbred, just letting you know, you can be country and not be a retard. and anything with a truck chassis, is by rights a truck. and to correct your mistakes, i believe you meant *because *style *a *road *does *hauling *doesn't *useless *loads. i left out the apostrophe errors, and no, a short bed isnt a waste of money, its all ill ever buy. and it wouldnt take 6 loads in a short bed to match a long bed. it would take 1 1/4 loads. dumbfuck its simple math

[Kawasakiforlife7]

@dondondonman and no, not all suvs are a truck frame. ford escape. not a truck frame. dont fuck with a mechanic, you wont win ;)

[dondondonman]

@Kawasakiforlife7 but the escapes not a suv ether its a croseover god im praying for your costamers

[Kawasakiforlife7]

@dondondonman what the FUCK is a costamer? are you mentally retarded?

[bustedknuckles8]

@dondondonman your a stupid fuck

[dondondonman]

@bustedknuckles8 aaaa ummm aaaa all i can think to say to this guy is your fucking stupid lol what a marune what a card what a stuge

[SO17Alpha]

Ohh Rednecks. You make the world better.

[tejanochris]

Chain saw rental. 35 dollars. Damage to vehicule. Priceless.

[tinderinc]

one transmission later and shes free...

[pfleeger2010]

It works real well to use two trucks too. They usually come flying out and stop about 10 feet in front of the other truck.

[l337pwnage]

Ya, you coulda pulled forever on that, but good thinking with the hammer, that is one of the best ways.  It just takes two people.

I had that same problem on an old truck, but I was stuck with using a torch and hammer, well, and PB Blaster. ;)

[tjoens28]

i would have worked better if the chain was lower to the ground

[footballrob34]

id probably buy a new hitch...

[jordtizzle]

chances are it was rusted nothing to do with the pin...jesus...idiots

[chihene]

The trick is not to put the hitch in until needed...put it under the seat or in the tool box..

[tssracing14]

@chihene wat tool box?

[weasel884]

hell i had to chain my ford to a telephone pole to get my hitch to come out,i had 2 log chains and gave it hell and when the damn hitch popped out the fuckin pole nearly snapped! lmao

[SBfordconn]

was the slow mo really necessary?

[wannadieessay]

look at that ass...

[bondovwvw]

nature welded

[XxClemsonTigersXx]

just be glad you didn't rip the whole rear bumper out!

[hawktana]

tea bagger kinda stuff here

[edwardatwill]

@hawktana What? no, you fool, this is called improvising. (Now I assume you are referring to the "Tea Party") How else would you do this without spending $150-$250 at the repair shop to do this? If you weren't referring to the Tea Party please forgive me.

[thenumber1dipper]

omg thats so priceless but ya everybody has them mistakes i have them so does everyone else

[Bongwater123]

KY lube should do the trick haha

[toro74449]

you guys are fucking retarded if you had a longer chain it wouldnt have been a problem. you could have grown a pair and floored it

[ThuGfunk]

Was anyone else just waiting for the entire ass end of the truck to rip off? lol

[fischerskidude]

wd40?

[monkeyseemonkeydodo]

wow. i had a stuck hitch befor but not like that. lol

[walyll0]

i suppose the best way to prevent the reciever from getting stuckis to; do not use it,never drive in rain, ocean, snow,salted roads, grimmed roads, or into a volcano, or in which case make another video cause melted hitches would soon be all the rage. btw congrats on getting the hitch out adapta balls are a pain also

[1995mazda]

I recently purchased a vehicle and was down to this option or the saw I chose the saw this looks like the way better option the saw took for ever and you have to be very careful not to cut into the receiver tube. Then you need to get a cold chisel to finish getting whats left of the draw bar out.

Moral of the story take your drawbar out when your not towing.

[sharpie1341]

You have to take the pin out.

[rapidotorpedo]

why not use a saw?

[mrgdud22]

When in doubt pull out

[sasserdave]

i hate when this happens was at a ford dealer and somone was trading there old f150 in well they were banging on that hitch for a hour didnt get anywere lol

[mcdaniele11]

u bought a chevy....... tht explains everything shuda bought a brain to go with it so nxt time u remember to pull out the pin

[tsnyder1988]

WD-40

[WonderWomanFan4life]

how many rednecks does it REALLY take to remove the trailer hitch? Cant he just go to a autobody shop??? what a idiot. Chuck NOrris and Wonderwoman could have done it

[ruscccpsia2010]

Oh shit yeah hold on der, lemme pull the pin out.  Oh yeah there we go.

[iTalkApple96]

they probably had it welded on

[stupedace21]

lol at first i though that guy was beating the car with his cane!!!!!!!!!!!!! lol!!!

[undergroundpredator]

bugmasta23- When He said use a gas welder, he was suggesting heating it up with the welder so the metal around the hitch heats up and should expand, allowing the hitch to become free. It May still involve some "beating out".

[calank923]

Lol this happened to me had to do the same shit

[brklynmd3]

I know this must be a joke, right? The hitch can never come out at a angle and that's what was going on with the chain to the tree. The chain was pulling "up" as well as out. That's why it came out while he hit it "down" with the sledge hammer. But nice video.

[windasman]

@brklynmd3

Not necessarily. A hitch has a lot of downward pressure on it when a trailer is attached and of course from gravity. So it may be stuck very solid to the bottom of the receiver as well as the sides. Regardless, it really doesn't matter if it's a slight angle-if it'll come out if it breaks free.

I did the same thing with 14 year-old car that as far as we know has never had the hitch taken out, except I used my Bronco and left the car parked while I yanked on it.

[1149245]

PB Blaster Penetrating Oil use it any time u have a problem like this it works magic!

[fosterbrotherlj]

damn bug masta u get some pretty retarded comments on here lol

[sorgster]

american quality, engineering

[xxGriffonxx]

Removing the pin helps!

[01ChevyZ71Fisherman]

w d 40

[iloveboats1]

what's that?

[01ChevyZ71Fisherman]

@iloveboats1 its stuff in a can that removes rust and helps stuck things get free

[infinitefootball]

hahaha

[brob1969]

Notice how the guy with the hammer had to hit DOWN before it came loose? The angle of the chain was pulling up on the hitch binding it even more; a straight angle or even a longer chain would have pulled that thing straight out.

[tscholent]

how about stuffing the receiver full of grease before you put a hitch on it?

[Haywire6000]

A blow torch and ssome old engine oil would have also done the trick, I had the same problem with my 1990 ranger.

[Shoog82]

Did you check under the reciever to see if there was a locking bolt???? Over here in aussie land i had the same problem... couldn't get the tounge out of the reciever to save myself... Did what you did, and wrapped chain around a tree and the tow ball. When it finally came loose I noticed a RUB mark underneath. Like two bits of metal has rubbed together. I then looked under the reciever and found that there was infact a locking bolt as well. NOT JUST THE PIN. Anyway, got it off in the end :)

[nightmareon208]

tie a 10 foot chain get a run itl come out

[bcamaro69]

lol i also did this on my 1994 jeep grand Cherokee. those things can really get rusted in. lol

[nibbler125]

did you take the pin out first ?

[bugmasta23]

you know...I wish we had thought of that.

[darkeyce02]

you never took out the pin?

[TheJohna9416]

@bugmasta23 LMFAO

[POWERSTROKEF350MAN]

@nibbler125 i was going to say the same thing ive never heard of one getting stuck in there

[ns9987]

@nibbler125 HAHAHAH omg that made me laugh!

[Lvduggo69]

Rust sucks !!

[countrydude03]

thats not a hitch, the hitch is under the SUV, thats a ball mount

[IBLUBYU2THERETURN]

It's called the receiver...deerrrrrr

[countrydude03]

nope the receiver it under the suv bolted on the frame, ball mount is the one that slides in the receiver hitch, look it up

[IBLUBYU2THERETURN]

Whatever... What ya do look in a U-haul manual for that...

[countrydude03]

what U-Haul Manual? i dont use U-Haul

[ADrunkHippe0xboxlive]

i use my own things...

[eCOREBMX]

no wonder you couldnt beat it off, that guys is hitting hit like a girl...

[OrinWalker]

This is why you do NOT leave your draw bar in the receiver when you're not using it.

[chevy3434]

Ive had them get stuck like that before.

I had once once, torch, wd40l 20 pound sledge, nothing worked, i hooked it to my buddies f450, and he got it out.

it was a bitch.

Now I greese mine

[bestamerica]

come on,,,

use a hot water and pour on the trailer hitch then ice melt it and off hitch easily,,,

or use a gas welding

[bugmasta23]

Why would I weld the hitch when I'm trying to remove it? Welding is a process by which you fuse two pieces of metal together, not break them apart.

[PATTONSFOLLOWER]

@bugmasta23 NO YOU DUMBASS you heat it up to to expand the metal when you gas weld theres a flame just like a ozy torch because metal expands when heated

[bugmasta23]

@PATTONSFOLLOWER Is an ozy torch some torch that Black Sabbath uses? Not sure I've heard of that one before. You still can't convince someone who knows the definition of "weld" that welding will separate metal. Seems like there are some geniuses here who couldn't get the point I was trying to make. But thanks for watching.

[reatard132]

@bugmasta23 What you want to use is a Oxy Acetylene gas... very hot... will work, just you dont want to melt it.

you may be able to get away with useing MAP gas. its a oxy propane mix that burns hotter than state propane.

Blacksmiths use a propane fired furnace. very hot, but only in there...

best bet, Oxy Acetylene gas

[Bongwater123]

@bugmasta23 me and you both know he meant cutting torch, not welding torch. but it was funny how you put him down

[bugmasta23]

@Bongwater123 I'm glad someone appreciates it.

[psykho15]

@bugmasta23 hahaha i think he ment torch it but idk some ppl are just that dumb

[QuattroStig]

@bestamerica

You are right. A welding torch would have done the trick. But he doesn't comprehend that. So instead he(bugmasta23) just makes fun of you.

[bestamerica]

QuattroStig,

'

hi there,,,

thank

[seizetheweakened]

what did he heat it with, a cigarette lighter?

[ThatHoodNiggaBrik]

next time take this hummer and punch it your friend first and than you.

[bugmasta23]

ummm....what does that even mean?

[flcl02790]

30 pound slegde and a little wd40 wwould have worked

[crickcrackatack]

Why did you want it out?

[bmclaren45]

next time put the chain around the very bottom of the tree

[bing12345678901]

exactly,,,kinda hard to pull it out sideways

[fstroker]

next time can i say ANTI SEEZE

[s30zman]

good job i had a geo tracker that had one stuck i did the same thing the only thing that happend for me was making a mark in the tree lol

[Dreg555]

Helps to take the pin out first.

[mikesiller70]

Wow, I always take mine out when not in use. I think it looks like shit when people ride around with a ball hitch sticking out the back. They could have at least not done it in an iced over drive-way... maybe a little traction would have helped.

[jujujus2]

i always take mine out too

[chingitobling2]

hmm.. but it protects you from being rearended at a slow speed, of if you back up into a wall?!

nd it does not look like shit, well, not on a truck,

[truckaholic]

true and now they have hitches that fold up and under the bumper and they look really nice.

[anjonjp]

Take a look at BRINK (Now THULE) or Witter Tow Bars (see my channel) for European style hitches. The new Brink Retractable, folds back under your car bumper (not for SUVs). I really don't understand why people don't add grease to prevent rust to this part of a vehicle where friction inevitably takes off the paintwork. A light coating of oil (e.g. WD40) on the towball will also help to keep that in good condition also unless using a friction based anti-sway coupler such as AL-KO.

[fishermankory]

thank u people r to stupid to realize that

[4point7Dakota]

i have a hitch with 3 balls on it, so you just turn it to pick which one you need and i love it. i also love the mark it leaves in other peoples front bumpers lol

[JL157]

Damn that. I leave them in all 3 of my trucks. I have a pintle for my newest truck. Iv been rear ended twice and they always end up with a nice repair bill, and all that happens to mine is the dirt is removed from the trailer ball. LOL.

[BDButch09]

I do the same thing in winter, people run into me and does nothing to my Jeep but bunches there bumper or grill right in ha ha!!

[SeanBuehler]

The icy driveway was what I was thinking too.

[Philscbx]

Your Lucky it only took a couple hits with sledge.

I had same tree with cutting torch converted to rose bud, with receiver glowing red hot, and still didn't come.

I had to weld custom brace to hitch and use 10 ton port-a-power to force it out heated again.

I had it at service shop a day before and they gave up.

And I have photo's to prove it.

That's what happens when they are not greased, and left in 10 years.

[hiyohi]

That is a great way to break your rear end

[motoxkid92]

lol what if the pin was in the whole time

[Philscbx]

Lol, what a nut

[jdiep78]

Rust will do that to you. I was really pissed when I had to take mine out too!

[dudechillinathome]

did you ever get it off and my truck would yank that thing right off or if it didnt it would pull the tree down (its a dodge ram 3500 dually turbo diesel 4x4)?

[diaz4sho]

youre a dumbass

[countrymexican1616]

lol ok hook to someones tow pacakge with out there pin and and get u a good run in go see do u not mess u tailgate up r bust ur back window up i can see it now... lol a tow hitch flyin into your truck

[Dodgeram591]

Weak!!

[chickenwing562]

how does it get that stuck ???????

[bugmasta23]

RUST!

[Philscbx]

Exactly