How to Repair Car Paint Damage : Spraying Clear Coat on Your Car

[smokenbudesq]

FISH EYES

[RochesterGT]

@smokenbudesq they're not fish eyes, it's metal flake. fish eyes look different.

[TheLizardKing1967]

FISH EYES

[NETWizzJbirk]

All of these videos sucks because they are less than 2 minutes long. How about a real video, Expertvillage?

[XBOX360ELGORDOLOCO]

can you paint over the clear coat

[chamblizi]

douge likes big things :D

[isilder]

Yeah he has a big gun, but you can just take a longer time to apply it with a small gun or from cans.

[julingy]

WHO THE FUCK HAS THAT EQUIPMENT. more like "how to repair car paint damage if your a business that repairs car paint damage"

- fucking assholes

[DrGamble28]

FISH EYES

[McDeeViouz]

BIG Gun with a BIG Pot and a BIG "Orifice" LULz

[99mitseclipse]

Can you paint over clear coat or over time will it start to chip off???????

[Carmador]

he works with 20 "GREAT" guys.

[dufondutrou]

can you number the videos in an orderly step by step method? Can you make a list of the steps. Can you show a video with the different guns and tools. Can you talk about air pressure. Can you get rid of bumbo or put him at the end... yeah the bland asskid!

[callmejacko]

big gun, big orifice

[1AUSSIEDAVE]

are you useing a 4:1 clearcoat or a 2:1 clearcoat?? a 2:1 clearcoat you'd only need 1.5 - 2 litres max. 2 coats on, walk away. if you think you may need to cut and buff it, give it the extra coat.

[vanaikee]

how many liters of clear coat is needed for a mazda b2200 mini truck ?i'm using a urethane paint

[vadimmart]

I think you need about 3 liters of clear coat, plus thinner and hardener you will get about 4 or little more ready for shooting liquid. But you have to remember that quantity of clear coat you need depends from number of layers you want to shoot. More layers, more paint or clear coat.

[yukonrott]

so ya im thinkin this doug guy is an expert at not knowin what hes doin.. DO NOT USE HIS ADVICE!! if u have questions ask someone else that comments on these pages.. trust me havin someone else give u step by step help is much better than this guy.. i can help.. i dont have any videos but i have helped people off here before. or just ask... someonw will help

[700whpfocus]

i live in florida........nice and sunny! how many coats of clear would you reccomend? i love a good shine. i was thinking of at least 6 coats of clear!

[treble92]

anyone recommend a good video for doing this yourself with cans? thanks

[jepamisschien]

that didn't look like flake piercing. looked like fish-eye. it's caused by not degreasing the bumper well.

[sdsand32885]

i agree it looks like fish eye or solvent pop....degrease and use some fish eye eliminator works pretty well

[cloudylicous]

Tip for anyone that uses aerosols for clear coating put the can in Luke warm water in a jug will loosen up the clear coat and will expand the gas inside and will apply easier

[nimbiot]

thanks cloudy, I'll be doing this soon

[MrTransamcamaro]

@cloudylicous how long do i leave it in there

[bykashka75]

gay

[RicanPap1]

I don't use the metal flakes like dat...1 Put the paint and them i put binder with the metal flakes and them a i put the clear,some custom paint come with binder so you can mix with the metal flakes or you can put on the first coat of clear. but for my experience i like better mix the metal flakes with the binder........

[yukonrott]

depends on the paint..and reducer and temperature..usually anywhere from 15 to 20 minutes will be ok..if its around 70degrees it should be dry in about 15 minutes.. when the shine wears off the paint then its usually dry but give it plenty of time and when u go to clear it make sure u use another tack rag to make sure there is less dirt on it.. i use 2 filters when i clear.. so it filters out any lil dirt chunks that may have gotten in there

[rasoros]

I learned more from your one comment than I did watching a dozen of these Doug-in-St.louis videos.

[yukonrott]

glad i could help ya! if ya got any questions feel free to ask.. i was in your shoes once also and i had people to help me so if ya need advice or anything dont be afraid to ask.. if i can help by emailing i will and if u need something demonstrated i can try and video one to show how..

[stearmer]

thanks for the comment,just one question,is it ok to sand it first before applying the clear coat?

[joinerdoug]

shouldnt the metal flake have been sanded down?

how long do you leave it in between coats of clear

[yukonrott]

no u dont sand the flakes down..u put multiple coats of clear on then if u still can see the bumps in the clear then you wet sand with anything from 1500 to 3000 grit sandpaper then buff to a shine..

[yukonrott]

and dependin on the clear, reducer, and the temperature time between coats can vary from 10 to 20 minutes depending how the clear is drying

[zyou8er]

Hi, what are the proper steps to painting motorcycle fairings? Thanks.

[yukonrott]

start by usin a degreaser to get any wax residue off of all parts..use clean paper towels and put degreaser on one and use one dry one..wipe on the degreaser then wipe off while sill wet. next begin removing decals or stickers..sand with 180 grit sandpaper and fix any imperfections with body filler. use a good primer then let it dry sand with 320.follow up with 500 or 600 grit.. degrease and tack rag off all surfaces and paint and clear

[zyou8er]

When i apply the paint, how long do i wait before i spray the clear?

[shagy2k5]

do you know anything about interior work, such as custom dash spray painting?

[RikkGti]

wooot

[bill44445]

thanks Doug for the info, exactly what I was looking for.