You dont need a liscense to own a gun, but you need one to carry one. What kind of shit is that? Maby not a liscense, but atleast have a certificate showing you are trained in gun saftey before your allowed to own a gun, that also covers carrying so you can carry it with that liscense also. Im completley against gun control, but Im also against people who dont know shit about the guns they own.
If you're still running the AFG, try Larue's Tactical Handstop. If you put the hook facing the web of your thumb, it'll keep your hand from moving much more. You could buy them w/ the indexing clips while you're at it :] Also try the BAD-ASS ambiselector for your finger troubles. They offer thin and/or short versions for one side so it doesn't obstruct your trigger finger.
Very nice rifle!
For the person in CA- you can buy this AR with a bullet button & 10 RD mag.
@SurvivorGuy23 " in the USA it must have a 16 " barrel for legal reasons ....oh ya they dont want the crazys hiding them under there jackets and holding banks up ... there for it will have a 16 inch barrel in the State's ... good example the fn P90 was made with a 12 inch barrel for military us but civilian market 16 1/2 in barrel or 16 inch .... same with the fn2000 sporting bullpup rifle with a 20 inch barrel i think
if you get a 45 degree offset mount you can still mount a flashlight, that's how I mount mine with an AFG. Also like others have said the rail cover issue can be fixed with an AFG2.
@GunWebsites yes in the usa, here in illinois you need to apply for a foid card through the illinois state police. and they send a physical foid card (firearm owners identification card ) with a picture and everything. and without one of these you can not purchase / own a firearm,or ammunition.
@SurvivorGuy23 nice, think i know what my 1st purchase will be once i get my license. by the way, any chance you would know how much a Noveske AR would cost, bare bones, planning on getting some MagPul and DD accessories :)
@SurvivorGuy23 i dont know much about guns but by gas piston you mean the same system that the masada and the 416 house so theres no reliability issues like on regular ar 15s?
That's a sweet rifle, have you tried running that angled foregrip all the way back up against the mag? I would think that would be pretty comfortable, that foregrip really has me interested, but love the rifle over all.
Why dont people understand that the closer the line of sight of a scope is to the line of the bore that a bullet will take the better. The 2 lines will cross twice. The closer they are the less adjustment there is to make between them. Imagine the scope 1 foot above the bore. If they cross at 50 yards they they wont cross again for a mile and half way in between will be many yards downward adjustment.
@Davidautofull agreed, but alot of people set their sights on high mounts for comfortability and fast aquisition purposes so they dont have tilt their head and shoulder the weapon at the same time. What warks for some, doesnt work for others. fortunately the military showed me the "right" way to do things and i love iron sights in an A2 configuration just as much as any other.
The Ar does not need to be gas piston to be reliable. If you use the right lubricant and use a lot of it the Ar will run for a long time. Look up the article on the BCM Filthy 14. My next AR is going to be built with a BCM 20 inch upper receiver.
High quality parts and proper lubrication will make an AR as reliable as any other weapon.
@TheBikefish Ak's do not suck. The U.S. military gives up power and reliability for accuracy when using the m-16. Third world nations give up accuracy for power and reliability. Improvements have been made to both weapons for there drawbacks.
when i first saw the magpul front grip i thought you put your thumb through the hole, which i would like. but now i see that you cant, so im not gonna get one of those,
The AFG 2 will be lower profile and not have those annoying wings. My friend had the same problem with his larue rail, so he took a dremel to the AFG wings and all was good. Nothing wrong with a finger forward grip on the AFG either, that is how I grip it.
I had the same issue with my AFG at first, with my hand slipping back a little. Then I flipped the "nub" around and realized that it makes it a lot tighter fit for your index finger and middle finger. No more slipping and you no longer have to put a finger in front of the AFG to get that tighter fit. Don't know if you and/or your buddy already knew about that or not...
I also stippled mine lightly with my soldering iron, and it's really grippy now, too!
@shitpickle1128 if the muzzle device is permanently atttached (ie welded), and brings the overall length of the barrel assembly to 16"+, then it is a standard rifle (NOT sbr).. however, if the muzzle device is removable (ie threaded on), then yes, it is considered an sbr.. remember though, that even w/ an sbr, it is the lower receiver that must be registered as such.. hope i've helped some.. regards..
@shitpickle1128 as i'm watching the vid, i hear him mention the flash hider is permanently attached on this one, so in this case it is NOT an sbr, no extra paperwork required.. gotta love it!
More than one of the guys have Noveske's. I think the other vids are of different ones, but I know this rifle (or at least parts of it) have been in many vids already
@DaSuperSnakeJake
yes
GunWebsites 3 weeks ago
what is the weight of this build?
tangodown475 1 month ago
Comment removed
nalBleeding 2 months ago
You dont need a liscense to own a gun, but you need one to carry one. What kind of shit is that? Maby not a liscense, but atleast have a certificate showing you are trained in gun saftey before your allowed to own a gun, that also covers carrying so you can carry it with that liscense also. Im completley against gun control, but Im also against people who dont know shit about the guns they own.
Snapshot290 2 months ago
@Snapshot290 The Second Amendment is our REAL "gun license/certificate."
OversteerVideos 1 month ago
If you're still running the AFG, try Larue's Tactical Handstop. If you put the hook facing the web of your thumb, it'll keep your hand from moving much more. You could buy them w/ the indexing clips while you're at it :] Also try the BAD-ASS ambiselector for your finger troubles. They offer thin and/or short versions for one side so it doesn't obstruct your trigger finger.
Very nice rifle!
For the person in CA- you can buy this AR with a bullet button & 10 RD mag.
OR move out of California =p
TWELVEGAUGEDAVE870 2 months ago
who pinned your surefire flash hider?
tangodown475 3 months ago
i like a vertical foregrip better
MrFrogg46 5 months ago
@SurvivorGuy23 " in the USA it must have a 16 " barrel for legal reasons ....oh ya they dont want the crazys hiding them under there jackets and holding banks up ... there for it will have a 16 inch barrel in the State's ... good example the fn P90 was made with a 12 inch barrel for military us but civilian market 16 1/2 in barrel or 16 inch .... same with the fn2000 sporting bullpup rifle with a 20 inch barrel i think
5100mikeb 5 months ago
@5100mikeb
It has a permanently attached flash hider that brings its OverAll Length to 16 inches, making it legal without any NFA issues.
trieditonce 4 months ago
@5100mikeb yeah as we all know bank robbers buy all guns legally and follow all gun laws lol
TheAlexagius 4 months ago
good rifle for afghanistan
SuperRip7 5 months ago
Whats the difference between a stainless steel barrel and the regular carbon(i think) barrel?besides what its made of lol
double2echo 5 months ago
Nice gun but what gloves are those? I want some now :D
Tux3d0 6 months ago
get an AFG2
noticalmeff 7 months ago
@noticalmeff whats that?
jordlind1 7 months ago
@jordlind1 Angled Fore
grip 2... Magpul makes them and they dont have high sides
noticalmeff 6 months ago
is it direct impingement gas operated?
HellaFlushEvo 7 months ago
i wish i didnt live in california -_______-
000terminator 7 months ago 12
@000terminator try living in NY
Luger718A1 1 month ago
if you get a 45 degree offset mount you can still mount a flashlight, that's how I mount mine with an AFG. Also like others have said the rail cover issue can be fixed with an AFG2.
JdmTheMilitaryMan 8 months ago
Nice setup man, looks good
315mulder 8 months ago
You dont need a license to own a gun.....
fusionstar916 9 months ago
@fusionstar916
not in the USA
GunWebsites 9 months ago 8
@GunWebsites yes in the usa, here in illinois you need to apply for a foid card through the illinois state police. and they send a physical foid card (firearm owners identification card ) with a picture and everything. and without one of these you can not purchase / own a firearm,or ammunition.
xIUBUNTUIx 1 week ago
@xIUBUNTUIx
that is a state law, not a US law.. when asked a general question, do you expect someone to answer 50 times/?
You are one of the very few states that requires such a thing, so it's hardly a US law
GunWebsites 1 week ago
@fusionstar916 your brain is not yet fully developed.
zollen123 5 months ago
I'm sure someone has already recommended an AFG2 for your issue with clearance! nice gun!
sbkarmen 10 months ago
@SurvivorGuy23 nice, think i know what my 1st purchase will be once i get my license. by the way, any chance you would know how much a Noveske AR would cost, bare bones, planning on getting some MagPul and DD accessories :)
0mgwtfbbq21 10 months ago
@SurvivorGuy23 i dont know much about guns but by gas piston you mean the same system that the masada and the 416 house so theres no reliability issues like on regular ar 15s?
0mgwtfbbq21 10 months ago
That's a sweet rifle, have you tried running that angled foregrip all the way back up against the mag? I would think that would be pretty comfortable, that foregrip really has me interested, but love the rifle over all.
TonyInTopeka 11 months ago
@SurvivorGuy23 Go with DI. You'll be fine with it.
cloop77 11 months ago
cleaning an AR, especially the bolt, makes it reliable. not cleaning an M-16 makes it stop dead.
Davidautofull 1 year ago
Why dont people understand that the closer the line of sight of a scope is to the line of the bore that a bullet will take the better. The 2 lines will cross twice. The closer they are the less adjustment there is to make between them. Imagine the scope 1 foot above the bore. If they cross at 50 yards they they wont cross again for a mile and half way in between will be many yards downward adjustment.
Davidautofull 1 year ago
@Davidautofull agreed, but alot of people set their sights on high mounts for comfortability and fast aquisition purposes so they dont have tilt their head and shoulder the weapon at the same time. What warks for some, doesnt work for others. fortunately the military showed me the "right" way to do things and i love iron sights in an A2 configuration just as much as any other.
rosspl23 1 year ago
@SurvivorGuy23
The Ar does not need to be gas piston to be reliable. If you use the right lubricant and use a lot of it the Ar will run for a long time. Look up the article on the BCM Filthy 14. My next AR is going to be built with a BCM 20 inch upper receiver.
High quality parts and proper lubrication will make an AR as reliable as any other weapon.
disturbedone5009 1 year ago
@SurvivorGuy23 i think ak's suck terribly, thats why our military uses m-16's and m-4's instead of them
TheBikefish 1 year ago
@TheBikefish Ak's do not suck. The U.S. military gives up power and reliability for accuracy when using the m-16. Third world nations give up accuracy for power and reliability. Improvements have been made to both weapons for there drawbacks.
endgamr 11 months ago
I took mine off and went back to the broom stick
miltnxc123 1 year ago
This has been flagged as spam show
with this noveske uppers and barrels does it effect accuracy compared to longer barrels? like this 13.5 compared to 16??
hambone950 1 year ago
@SurvivorGuy23
no problems at all with this one
GunWebsites 1 year ago
maybe a hand stop would work better for you if you don't like the afg.
btw a dark earth rubber cover would look really good on that aimpoint
jimmyboy3664 1 year ago
Nice setup for sure,Love all the mods.
The setup Worked well through the windshield :)
I ran the Magpul afg but It just did'nt work well for me on deployment.
I went back to the 3" FG after a few months,thats just my run with it though.
Others may like it more for range shooting but I found it bothersome when snap shooting overseas.
Great video BTW very informative.
boosted28 1 year ago
Great look at this rifle. Please tell me again what the ambi mag release is?
stinkbug2012 1 year ago
when i first saw the magpul front grip i thought you put your thumb through the hole, which i would like. but now i see that you cant, so im not gonna get one of those,
colton12344321 1 year ago
I like the first one better!
evankoeve 1 year ago
The AFG 2 will be lower profile and not have those annoying wings. My friend had the same problem with his larue rail, so he took a dremel to the AFG wings and all was good. Nothing wrong with a finger forward grip on the AFG either, that is how I grip it.
Dumak2 1 year ago
Do ninjas use this rifle?
skullcrusher7979 1 year ago
His gloves?
ALAPINO 1 year ago
@ALAPINO Nevermind-- caught the "Franklin" tag.
ALAPINO 1 year ago
Nice rifle!
AppalachianFreedom 1 year ago
I had the same issue with my AFG at first, with my hand slipping back a little. Then I flipped the "nub" around and realized that it makes it a lot tighter fit for your index finger and middle finger. No more slipping and you no longer have to put a finger in front of the AFG to get that tighter fit. Don't know if you and/or your buddy already knew about that or not...
I also stippled mine lightly with my soldering iron, and it's really grippy now, too!
S/F
RetreatHell 1 year ago
would this be a sbr nfa item? because its shorter than 16 inch? or is it just another rifle
shitpickle1128 1 year ago
@shitpickle1128 I think it's either $120 or $250 tax stamp for the SBR.
rotorleopard 1 year ago
@rotorleopard o yea i know that but would this be a sbr ? or would the fact that the surefire flash hider make it just another rifle?
shitpickle1128 1 year ago
@shitpickle1128 If that isn't permanently attached to the barrel, it would be considered as an SBR.
rotorleopard 1 year ago
@rotorleopard
$200
GunWebsites 1 year ago
@shitpickle1128 if the muzzle device is permanently atttached (ie welded), and brings the overall length of the barrel assembly to 16"+, then it is a standard rifle (NOT sbr).. however, if the muzzle device is removable (ie threaded on), then yes, it is considered an sbr.. remember though, that even w/ an sbr, it is the lower receiver that must be registered as such.. hope i've helped some.. regards..
FTW20ten 1 year ago
@FTW20ten
Great answer, thanks !!
GunWebsites 1 year ago
@GunWebsites anytime.. appreciate your work, so thank you!
FTW20ten 1 year ago
@shitpickle1128 as i'm watching the vid, i hear him mention the flash hider is permanently attached on this one, so in this case it is NOT an sbr, no extra paperwork required.. gotta love it!
FTW20ten 1 year ago
stupid question maybe (I'm not from the US).. is this full auto?
thorington 1 year ago
@thorington
not full auto
GunWebsites 1 year ago
@thorington How it's supposed to be full auto when at 4:04 there is only semi o_O
I'm not from US and I can see... Strange huh?
albi131 1 year ago
the AFG2 should fix that problem
jdawg54874 1 year ago
those look like good gloves
bubblezq 1 year ago
@bubblezq
Franklin - we plan to do a review, we intended to do one that day but forgot / ran out of time
GunWebsites 1 year ago
Please review the F2000 or the AUG I want to see how a bullpup weapon looks disassembled
srakso2 1 year ago
@srakso2 you do know there are a thousand videos on youtube of them.
richiestang78 1 year ago
I'm not a fan of those AFGs, I prefer stubby vertical grips.
Metzgermeist 1 year ago
Nice rifle, are the Larue rails narrower than even the Daniel Defense rails?
mythreebuckeyes 1 year ago
Cool stick.
jeffshootsstuff 1 year ago
8??? Noveske's GOD-TIER AR.
supermaucat 1 year ago
nice weapon
glock19x300 1 year ago
Is this a new video? I think I've seen this a while ago... at least the title was the same or very similar... sweet rifle though.
coolstuffaddict 1 year ago
@coolstuffaddict Looks pretty new, that Magpul grip is pretty new.
Mrcaffinebean 1 year ago
@coolstuffaddict
More than one of the guys have Noveske's. I think the other vids are of different ones, but I know this rifle (or at least parts of it) have been in many vids already
GunWebsites 1 year ago