Complete Disassembly

[franking132]

i lost my the rubber mana fold and the small white restricter pice and the o ring that goes on the front of the bolt with the spring on it is there any way i can get a new one

[odstftw]

all i have to do is take off the grip and unscrew the old asa to install my on/off asa

[MrMayonnaise999]

Bet ya 50 bucks he can't put that back together LOL

[tktylman]

ok my invert mini keeps leaking out of the barrel and the reguater is it the o rings

[fallin232]

@tktylman

Did you get this fixed?? Im having the same problem...

[wiilikepie]

one of the screws on my rail is stripped and screwed in all the way so I can't unscrew the asa, is there any other way I can remove the asa to remove the stripped screw and replace it, also the front of the asa is a bit loose (which is where the screw is stripped at) Should I just send it in to Invert?

[wiilikepie]

@Canadiansoldiersrock

Turn your pressure down, jesus, your going to fuck up the internals of your gun, thats a bleed valve dude, when the pressure in the gun gets too high air will automatically come out of that little valve so you don't screw up your internals, but thats not to say that if you do it more than once your internals won't take any damage, read your manual, all you have to do to adjust the pressure is loosen the gold screw on your ASA.

[hairyballsack10]

nice vid

[silverstone111]

why cant i get my feed neck off

[Buferd]

Hopefully you figured it out, but they use loctite on the feed neck. It was SUCH a pain for me to replace it with the NDZ low rise feed neck. I had to completely disassemble the body and use vice grips to get it off! It sucked! I even tried a blow dryer AND a heat gun to loosen it with no luck until the vice grip.

[obito55]

i dont know whats wrong with my mini cause everytime i shoot it just drops balls and sometimes it shoots but if im walking the trigger or using full auto........ its just something I NEED HELP WITH!!!

[WoWbob396]

screw ur tank in ALL the way make sure ur tanks thread is all the way in the mini so much that u cant see the threading in the tank

[ChrisDokProductions]

whats your gun pressure set to

[woodsballproductions]

make sure ur bottle is in all the way

[madscort820]

I jus got my mini and i was cheking the bolt to make sure it was lubed, i noticed a small score about an inch long. Any ideas y this would happen?

[Initialftw]

one of the stock problems with a mini is that the stock bolt tends to scrape against the spring, any aftermarket bolt fixes that problem

[DIRTYCHEESE]

ahh i would not worry about it. my stock bolt is completely scored it is still functional so w.c. the reason from this happening it the spring from the bolt guide is pretty friken hard so it will sometime take a good cut out of your bolt but a v2 bolt will fix that in a jiffy. and did i mention the v2 kit comes with 3 springs tensions with less friction.. don;t worry about your breach i have beat the shit out of my mini but my breach is still mint. and i just tighten the stuff that comes loose.

[pbmartin14]

i love the invert mini i really hope invert/empire comes out with a second mini, or a newwer type enclosed popet blowforward!!love em

[cb4fanforever]

isnt this the guy that engineered it

[Alex1isawesomeiguess]

what are the sizes of all the allen keys I am buying one used and I want to know the sizes so I can take it apart in any situation

[1994dude4444]

just buy a set but it comes with all the allen keys you'll need.

[Alex1isawesomeiguess]

haha did it already that comment was old

[daboi45]

i love how you can take the whole mini apart with one allen key!

[rosstheboss2223]

not one, but like 8.

[monkoy11]

where can i get a little white restictor piece he showed at the end that he said not to lose. cuz mine is lost

[RuNiTzSpAnKy]

use a small kit screew driver to unlock ur feedneck

[kruttsniffer]

could you please tell me how i get the feedneck off? it goes so smooth in that video, mine is stuck...

[barredoa]

if yours is stuck that means that you screwed in the feedneck wrong,thats why it got stuck

[azmodia]

Same here. Mine is stuck and I don't see where to unlock it?

[TSMColby]

this could put a scratch on it or somthin, but it works, theyre on there really tight, but a it does is twist off, so get some vicegrips, and twist it so its loose, then just twist it off

[rosstheboss2223]

i put my hopper in it, tighten it down and then twist

[paco91]

now assemble that sexy fuck for another game

[sjcrawford69]

how do you push the pin out to get the trigger off?

[gotmini]

my feedneck is locked up in my mini. it just will not unscrew. can anyone help?

[redtippmann]

i like how he says "if you dont have fingernals"

[invertballer12]

hey could you tell me what i should do about my mini because when i put air in it air leaks from the back cap area and i was just wondering is it just a o-ring or sumthing?

[ramonesrock654321]

yea alrigt i had the same problem. heres what you do,take your 1/4 allen wrench then turn your back cap all the way in. put your air in. then turn the back cap one whole counter clockwise turn. that should do it.

[faksalt]

when i was adjusting the trigger after i was done the gun would not shoot

[sharpysniffr]

cause its probably so close to the switch it doesnt register

[FuSiOnXMaN]

hint invert next time use a white matt.....

[TheDuelist101]

Yes, please do, hard to see what the small peices are, and what they look like =P

[ownagewithpilot]

i cant get one of the ball detents out and its really pissing me off any ideas on how to

[combatzonepaintball]

Well, I have a Mini for a year ago, but now the regulator is damaged, so, I don't know where to buy a new one.

[Ninja1058]

KEE is your best bet. they will eithe repair yours or send you a new one for a cheap price

[ownagewithpilot]

do you have to do all of tht crap to clean the gun ?

[goldwest57]

no u dont have to. watch teh maintenance vid.

[kingofducktape]

come on if the asa is that easy to get of there have to be making on off new ones

[masterchief1212]

MY FEED NECK WONT COME OFF!!!

[chickenmunga]

Use a strap wrench, that should probably work

[Birch00112]

way more confusing tan my old ion

[Paintball1027]

You're a retard. Ions are a pain to clean and dissemble. Little plastic pieces of junk.

[Buferd]

Yeah my feedneck has not come off yet either. I tried STANLEY gloves with the rubber on the bottoms and also stripped the mini of every internal except the body and the feedneck, just all metal, used a hairdryer and still no luck. I am going to try a heat gun today and see if that works. I also tried using the hair dryer and then a wrench, STILL no luck! I just want to put my low rise NDZ feedneck on!

[Buferd]

I got it off! The heat gun didn't even work. I had to use vice grips which completely destroyed the factory feedneck, but that is ok cause I am putting my NDZ feedneck on.

[JordanTheBassmasta]

Why the hell would you buy a new feedneck for this gun? Complete waste of money.

[xchotch]

lawyer stuff. i think pulse had the crap sued out of it for using a little bit of smartpart tech in their hopper. thats why they don't make them anymore.

[DaRkAnGelOwNeR]

they used rf technology which was under construction with the magna.

[choiboydaman517]

they used the belt drive technology as well.

[bonaccorso321]

the fucking feedneck willnot unscrew on my mini

[KMAYER1221]

Its called loclite. Every stock feedneck has it. Put some heat on it, such as a hairdryer, and it should twist off.

[albo555]

my invert was leaking through the rear grip frame screw, do u kno wuts wrongg

[patio87]

Haven't even aired up my mini(just got it) and the solenoid is already broken. The bottom piece literally ripped off just from clicking the solenoid, not even aired.

[enzTX]

Call KEE customer service.

That sucks a lot (a lot) about the noid, but KEE provides excellent customer service and they will send you a new one.

[djfiotto259]

is invert gonna make a special drop forward for the mini?

[facethemusic1]

Judging by what they say when they address the use of drop forewards on the mini, it looks like they probably will. I wouldn't be surprised if aftermarket manufacturers did the same.

[FyreFox94]

where can i get one of those invert mats that he;s working on?

[davebike]

auntjemima, get a strap wrench, it will take off your feedneck

[Pezdetz666]

Hey, i wanna get a MINIM for my 1st electro(Ion blows, too common) I can get a mini + 68/30 tank for $420, plus i guess a viewloader Evo III, or a Halo B loader. I wann know, will the Mini work with the 850 PSI tank, or do i have to spend $00 more on a 45?

[nessa6565]

is someone selling this or is a web page offering this deal?

[auntjemima777]

i cant get my feedneck off its so tight lol anyone wnat to give some advice

[TheeOwnage]

put ur hopper on and make it tight and put WD40 around the edges of the feedneck and unscrew. do do it so hard it cracks ur hopper tho.

[pizzaman1995]

Thhanks

[gtmracing1]

No...just undo the rear grip frame screw and push the bolt out

[INVERTmini3]

to lube the bolt do u have to take apart the gun sorta like this.. or unscrewing the velocity adjustment or w.e

[laqoree]

is it ok to lube the bolt o rings with the grease that comes in the tool kit?

[joemamma01]

this video is amazing. it helped me out tons.. mini ftw

[b1uetard]

Thank you so much for this video, it has influenced my decision greatly and i sided to get an black invert mini

[dawier]

The Invert mini is the greatest gun ever! the gun is even stronger then the Angel A1

[pballin77]

i gte mine in a month.....

lol

[YoB1KajoeB]

you look and smell like a smelly fuck, go fuck ur momma shes good in bed.

[chevymouse277]

when he dropped the foregrip cover i was like HOLY SHIT ITS REALLY METAL lol i was surprised

[tomis87500]

im getting a mini once i get the money. I'm selling my ps2, all 20 of my games, two controllers one stock and one wirless and clear, one memory card, and an eye toy so if any one wants to buy it its on ebay under Sony PlayStation 2 - Game console, 20 games, and more ending next monday so bid now

[Dyeballer610]

are you kidding that lookes like the easiest gun to put together

[davidveltri101]

the mini is great yet has a million parts in it

[s74532]

I wonder if this guy will be my personal airsmith...... He is good! :P

[hxcman1]

what would be a better choice....a promaster, or the invert mini?

[tomis87500]

an invert mini because it is easier to take apart and put together has very little matinence to do on it only one task actually and the both shoot about the same but with the board upgrade the mini can shoot faster and ofcouse the mini is smaller and lighter its you desision good the promaster or great the mini

[GearboxProductions]

buying this next week! i cant wait, ive saved up alot of cash, and it's all going to Invert gear

[mattstatton]

wow great vid he knows his stuff, i personaly thaught the mini would be realy complicated, because of all the things they had to jam in there but i think invert has donw a spectacular job in concealing it :)

[DynastyRulesPb]

kinda alot of work to take complete apart, but it look easy

[bobby304]

ooops i mean feed neck thread. Not barrel thread

[bobby304]

lol. ICD/ion/shocker/smart parts that is a very compatible barrel thread.

[ICDWILL117]

ICD feedneck threads are not the sam as Smart Parts feedneck threads..they're slightly different...I know, I own a bushmaster.

[clorox2856]

by icd, he means like the freestyle, promaster, etc. bushies are diff.

[Kill3rShadow]

Now I know how!