Home made rc boat Charge building

[minecraftblikje007]

you have a blueprint of it

[Micho6911]

@minecraftblikje007

I have not.

[levyjansen]

sorry I knew that after nie were you on the fuselage wall Staad hobby king,) but tovh nice to him after making

[levyjansen]

i,m sorry

[Micho6911]

it is ok

[levyjansen]

can you send me the link? or the picture

[Micho6911]

What link? What pictures ? Video do you think? This rc boat video is already among my videos on youtube:)

[11dainiel]

do you spray paint it?

[Superfubario]

I wish you had plans for this boat. I would love to try and build one for myself. I dont like the look of most speedboat plans I have found. Nice boat love how she looks. Looks fast even when sitting still :) Now you need a video of her going really fast!!

[Micho6911]

@Superfubario

Plans for this boat i have not. Video I did.

[Micho6911]

except plywood has to be: - brushless motor outrunner Heli class 600 1500-1800 kV, esc 120A,standard or mini servo , receiver, transmitter, shaft, propelller, Lipol bateries.

[MrXiaoweix3]

what are the parts needed?

[Micho6911]

@MrXiaoweix3

except plywood has to be: - brushless motor outrunner Heli class 600 1500-1800 kV, esc 120A,standard or mini servo , receiver, transmitter, shaft, propelller, Lipol bateries.

[TheMarduk13]

nice work man.. what materials did you use??

[Micho6911]

@TheMarduk13

Hi, Thank you, plywood and spruce beams

[TheMarduk13]

@Micho6911 tnx.. how much it cost?? do you have any stores?? :)

[Micho6911]

@TheMarduk13 stores: astramodel for materials hobbyking for electronics. Cost is : materials 90,- usd / for electonics 250 ,- usd

[Micho6911]

Respond to this video... stores: astramodel for materials hobbyking for electronics. Cost is : materials 90,- usd / for electonics 250 ,- usd

[Micho6911]

thank you :)

[WhiteboyBush]

my respects to who made tha lil speed boat. :)



[Micho6911]

I have not plans. Boad is made form plywood. Yes, I know it is fantastic :)detailed photos of the buildings are not enough? are in the video.

[LeoMarionLeo]

Please send me plans on email. At least draw some balsa pieces, only basic one. Boat is fantastic!

[Micho6911]

yes,First of primer spray and then the top spray 

[11dainiel]

spray painted?

[24gotnitro]

very cool design. would you be able to send me pictures and sketches as well

[Micho6911]

Yes, but Only I do not have such a relentless cameraman:)

[Z9Falcon]

This is brilliant, @Mico6911! Simple, no. You must show us a step by step video of how you do this next time! :)

[teslok]

perfect! plan???

[Micho6911]

Ok, I understand

[Micho6911]

Recently I gave it to a more powerful engine ... but I did not have time to try it ... because when I drive so I can also record video simultaneously:( .

[Micho6911]

Why do you think? I should give the metal prop?

[u8iku97]

@Micho6911 yes, and you shouldo put a strut on that, cause its good to have adjustability on high speed boats....

[u8iku97]

nice boat, but it wil never go 120km/h whit that prop...

[Micho6911]

I just created them and extend what you see.I started with the bottom surface, which when properly cut out to create a beautiful shape as you can see the works. Then I just according to what has already finished half reindeer customize and tune into other parts of the whole, what you see. really

[Micho6911]

Yes, it's a very nice hull. But plan I have not. it's very simple to build the hull. First I cut out the area of the plot/paper/, and stuck together with tape. Then I refine the shape, cut to the perfect.Actually it is composed of 4 areas.I used Areas from my rc boat Speed,

[11dainiel]

YOU MUST DO A PLAN FOR THIS! this is the coolest rc boat i ever seen!

[Micho6911]

@11dainiel

I personally do not know charting technical drawings / plans, but I know design and build RC boat.

[Micho6911]

detailed plan exists not - all I etched directly on the plywood./from my head/ I I can think of 3D.

[Micho6911]

technical drawing or construction plan on building I have from my head. and from my sketcesh . It is now my 8 model ships that I invented so improves.

[Micho6911]

I do not understand. What do you mean ,, drawing,, ???

[Micho6911]

You're not a first who expressed interest and the model ships. I will try to initiate a mass production of the hull of this rc boat if you wait .....in this color, and yet in just any, as desired by the buyer.

Michal Slovakia

[stemacey1991]

hi i am intrested in buying on of these hull as my wood work skill are none exsitent so do you do build to order hull and if so about how much would you like to build me one

[Micho6911]

@stemacey1991

Hi, You need only hull or full acessories rc boat ? /moror+esc+servo+receiver+batt­+ rudder+shaft+.../ ?

[Micho6911]

Yes,so professional, What's your email?:)

[Micho6911]

Yes,so professional, What's your email?:)

[RyannnYt]

Hey can you send me the dimsensions please? I tried buying plans but there a little bit more on the other side for me because they are to professional.. I would appreciate your help. :) Thank you very much.. Btw good job!

[Micho6911]

Thank you. Currently used Turnigy T600 4030/1400Kv.

[ssstouraitis]

@Micho6911 hey good job please i need your playn for this boat send them at this email address ss.stouraitis@windowslive.c om

[Micho6911]

@ssstouraitis

Plan i have not. I send to you only pictures whit dimensions. OK ?

[ssstouraitis]

@Micho6911 thank you very much

[Micho6911]

ok :)

[Micho6911]

Finish ,,air,, plywood/beech/ ,class:AB/B thickness : 1 - 1,2 mm hull , cannopy 0,8 mm.

[Micho6911]

thank you:)

[MrPsk93]

ett ord: awesome!!!!

[Micho6911]

not. It's just plywood but solid is almost like fiberglass.

[nicholas5674]

i thought you were going to fiber class it.

[Micho6911]

Yes, due to the hydrodynamics :)

[gabe3366]

sick ass boat

[Micho6911]

i have not plans... only pictures.

[flamingo295]

@Micho6911 great job, wich engine did you use? 

[Micho6911]

@flamingo295 Thank you. Currently used Turnigy T600 4030/1400Kv.

[LpAndStarWarsFan247]

my email is lpiparo@wi.rr.com

[pipymagic999]

i would love it if you could make up some plans for this boat that i culd get from you thanks.

[Micho6911]

thank s :)

[mahmoud3x]

thank you micho you r the best :)

[mahmoud3x]

my e-mail ? mahmoud_elmeniawy@yahoo.com



[Micho6911]

ok.what do you e-mail address?

[mahmoud3x]

cant u just estimate those sagitta shape parts dementions ?

please



[Micho6911]

Hull is made​of Finnish plywood 1.5 mm thick plywood and where I gave connects spruce played for reinforcement and strengthening of joint 3x3 mm.Kabína is thinner plywood of 1.2 mm and 0.4 mm from the top. It is painted from the inside of nitrocellulose lacquer.

three parts which form the hull shape of the triangle are not-it's more arrows - sagittal shape of the hull has.I stuck to superglue super sparse, save your eyes to get out!

[mahmoud3x]

i'd be realy greatfull if u could measure the parts for me

[mahmoud3x]

u drew it straight on wood? wew

could u at least measure the 2 triangle parts that makes the tip of the boat

[Micho6911]

ok

What would you like to know? what size? rates? parts? I do not plan or dimensions. did-I drew it straight on plywood.I need to measure

[mahmoud3x]

hey man great work

but i was wondering

could u provide some help with the parts and its measurements ?

not the boat's dementions i need the parts measurements realy bad

i'd like to make a boat like yours

thanks :)

[Micho6911]

lenght: 845mm , width 220 mm, height: 102 mm

[champloo166123]

and what are the measurements of the boat?

[Micho6911]

thank you

[volomalino65]

hi! Good job! Good builder and nice design!