How did you manage to put the head gasket the wrong way. It wont even fit the 2 different size pin that Aline the head to the block. I know for a fact that performance head gasket can only be put one way only or it wont go into the 2 pin that Aline the head to the block. If you try to flip the head gasket, the holes would match up but the 2 pin would never fit the performance head gasket.
if oil is in the water sounds like a headgasket check for water in the oil, look at the oil cap for mayo, if it has no oil presure dont run it as it will blow the big end then will rewin your day as will spin a shell then score the crank and your onto new crank and conrod and shells, only other place where the water meats is on the head if its has a headgasket the head may be worped or cracked same with the block may be worped or cracked. there is no other place the water meats the oil on mr2s
for the starter replace the starter relay which is the one you showed in the video. then have an electrician check and maybe recondition it . also check the cold start injector time switch if its broken or damaged in any way replace it ..
Head Gasket
theintelkid 2 years ago
Need serious mr2 help
DTurbomr2 2 years ago
Looks like a head problem man, either head gasket is cracked, or u got some problem with ur head, Check it out immediately !!!!
nityjizzle 2 years ago
How did you manage to put the head gasket the wrong way. It wont even fit the 2 different size pin that Aline the head to the block. I know for a fact that performance head gasket can only be put one way only or it wont go into the 2 pin that Aline the head to the block. If you try to flip the head gasket, the holes would match up but the 2 pin would never fit the performance head gasket.
SamSW20 2 years ago
if oil is in the water sounds like a headgasket check for water in the oil, look at the oil cap for mayo, if it has no oil presure dont run it as it will blow the big end then will rewin your day as will spin a shell then score the crank and your onto new crank and conrod and shells, only other place where the water meats is on the head if its has a headgasket the head may be worped or cracked same with the block may be worped or cracked. there is no other place the water meats the oil on mr2s
billybobbooth 3 years ago
hey bro i need mr2 help some one who knows
DTurbomr2 2 years ago
ill send you a private message with the image of the switch cuz i cant seem to be able to post it here
ihellrider 3 years ago
for the starter replace the starter relay which is the one you showed in the video. then have an electrician check and maybe recondition it . also check the cold start injector time switch if its broken or damaged in any way replace it ..
ihellrider 3 years ago
For the starter.. relay broken oid?
Neutsche 3 years ago
headgasket.. 100% sure..
Neutsche 3 years ago
found out the problem, the headgasket was put on the wrong way. Now the other problem we have is the starter???
onegenuineflip 3 years ago
headgaskets blown
Quocsy504 3 years ago
good call
racerDOHC16 3 years ago
hopfuly it's a simple gasket, but you have to open up the engine to confirm it. get some profesional help mate
stebe1984 3 years ago