If you want to stay at the same power rate, Make 2 more parralels spiraling in the other direction, Keep the circumfrance of the new spiral, 1 and 1/4 inches bigger than your original, then attach your same power supply in reverse to the new spirals, this will maximize output and at least quadruple production but im guessing ten times more efficient
What is your largest LPM you are getting? I have watched a million videos on here, it seams like most work fairly well, it seems like the solution and voltage and Amperage is what can affect the out put. Am I wrong? Thanks!!!!
@MNWVOer yes voltage is everything, i use a car stereo amp pulsated.. but you can use ac but it will explode if done wrong, but for auto you wanna try to use dc or low watt ac power that can be converted from the cars power
Olá meu amigo, moro no Rio de Janeiro, Brasil, tem como você mandar um diagrama de montagem com medidas e o material gasto, abraços de Amauri Correa da Fonseca, meu Email: amauri12009@uol.com.br
Good and informative video. Would you say that coils/spirals are better than plates or vice versa? Or does it depend upon your configuration and power?
With as many jigs you have made to make the coil, here is one more I use for my chainmail. drill your holes in the turning pipe to make a slot, that will except 4 wires side by side tighly. so when you unwrap them they are already the correct distance apart for every turn you make. This means wires 1 and 3 have the same space between them to the right distance needed for the center wire holding jig. Also you could make a smaller set to fit in the middle as you neutral wire/plate.
I have a 6400cc truck we pay 1.45 litre @ 37 ltr per 100 klm ! thats more than $6.00 a gallon I will make this energy device to save me and the planet, What size would I need to effectivley reduce my feul consumption ? yes Amox nice nice nice work I am very inpressed with your tecniques and simplified explaination, Thankyou.
i thank you for this design i mad a simalar one by putting a large spiral agenst the walls of the container and a smaller spiral in the center it has the best results i have ever seen
I suspect flat stock would be better. It would give a more uniform surface to surface conducting path. Why 316? I used to work with that in machine shop, but I found that it was not the number one preferred version of SS in the real world. Another thing, I have considered that flat plates bubble so much that the flow of water is interrupted, and that means less production. So is that why you are doing spirals?
@AmazGraz I did spirals because it intrigued me and they looked fun and were very tiny but there is too much energy converted into heat so I gave it up especially because my spare time is nearly zero. Thank you.
too much heat, is caused because of no spacers and the additives in the water.
Also, keep the electrical connections out of the water and isolate the straight parts of the spiral. There's too much amps wasted over there, focus on the electricity only to touch the water (and thus amps being produced) on the spiral itself. Personally I do not believe additives are necessary in order to have a efficient production. The solution will be on tuning with electronics
espectacular la forma de explicar,yo no entiendo nada de ingles y sin embargo esto si lo entendi.si podes ayudarme yo quiero hacer uno igual y hacerlo funcionar en mi auto quisiera que me guies si podes hablelo en castellani me va a servir mucho. exelente. congratulations.sludos.
This is a great video. its nice to see one with out stupid music in place of relevant information and people only trying to brag that they ruined a good cooler. thank you for the time you took to make this.
i just realized, why not just make a double helix, having both leads begin at the top, and both leads terminate at the bottom? it will work, and work better i believe
Excellent video! You might try this to help reduce the work required to produce the coils. As you are winding the stainless wire on your mandrel, if you place a spacer (that is the same width as the space between the coils on the form) at the wire as it is formed around the mandrel when you finish winding you will have a perfect coil or nearly perfect with no or very little adjustments needed
How many amps are you drawing with this particular cell?
@ taliban simply no could not have put it any better .... it will ruin your whole system electrolyte and all copper is highly corrosive whether using vinegar or KOH
Stainless steel washers offer more surface area and thus makes better production of HHO. Keep it simple always remember that, and washers are like 10 cents a piece and can be found in any hardware store. Keep it cost effective.
im building hho hybrid on my 2008 acura TSX EURO R 4 cyclinder with duAL VIPER hho CELLS ANY GOOD POWER SUPPLY ? i GOT MY EYE ON sTINGER AUDIO BATTERY
Well this is very kind of you but since this is also the way I work in my every day life it is of no particular effort for me to do and I think if we all can add a bit of care to the video production we all obtain a usable quality with practically no extra work.
Thank you again and I am looking forward to present in spring time a new cell with very interesting characteristics naturally only if all the testing will be as successful as I hope they will be.
@AldenVT Since we do it by hand it is a matter of testing and measure the results. watch my video number 8 there you will see the correct way to wind a spiral.
Gentlemen gentlemen, let me put an end to the arguement. Watch this video for absolute proof that it is IMPOSSIBLE for HHO to increase miles per gallon. Good stuff.
It seems that the most popular way of producing HHO lately is the brute force method using DC and an electrolyte. However, there is another way by which you need significantly less current and no electrolyte. This method makes use of a Resonant Electrolysis circuit.
While using the twin Helix as you have done in your design is probably one of the most effective and simple ways using brute force, Resonant Electrolysis has more potential to produce high volumes of HHO.
As you see by watching my videos I do not pretend to be efficient but by now I do agree fully and concur with you that brute force is easy to obtain and that there are definitely more sophisticated and intelligent ways to obtain more gas with less heat. To bad I am no good at electronics, otherwise I would love to dig into the Resonant Electrolysis, it looks fascinating to me.
I would say based on my own research and readings, the Resonant Electrolysis technique seems to be best. Of course it requires a bit of circuitry that you have to make so it's a bit more involved, but if you work at it, you can certainly do it.
You have to recognize that Watts are actually a measurement of heat. So if you put more voltage into the system and use an electrolyte to increase current, well then you get more heat.
Great fabrication lesson ammanninox. Thanks for the vids!
Yes it is normal if it is a spiral or a single plates + and - , because you pass more energy through the water than is needed to make the separation into HHO and that energy leftover heats the water. Some use PWM's to reduce heat, and some change design of the cell. I changed my cell design. Heat is a sign the cell is not working efficiently.
DIY Its work DoublerVoltage In12V to35V, out 24Vto 76V circuit fr. ElecFree com "search 12v to 24v dc to dc converter IC 40106, change BYWS1P1-200 to FT2000G n all the Capacitor into higher value, work very well together with PWM G Forrest Cook, all MosFeT using IRF250 w/Big Heat sink , 30Amp Max. for any HHO Cell thks :)) NO MOre Limited 12V fr.CarBattery
To lower the amperage used you need to apply a high frequency to the coil.
You do this with a variable frequency, high current circuit. With a amp meter connected, slowly increase the frequency until you see a null,(a drop in amperage). This is now a "tuned" circuit with alot less current draw.
that is brilliant! try running 3 shorted (connected to one another) neutral wires in between the positives and the negatives and i think you will win the science fair! hey! you tube should have a science fair with prizes!!! wooo!
By all means carry out your own research and experiments but please, please realise you will can't run a car engine purely on HHO since the laws of electrotrolysis means you would need a huge electrical current and/or lots of time to make the gas. Even small IC engines as fitted to strimmers, mowers, chainsaws etc won't run for more than a few seconds at best. An engine needs more fuel/air mix that the HHO process can generate.
yes i love the hho idea i have bin building them for years ..how ever people need to under stand hydrogen is a dry fuel it needs to be blended with some thing to slow down the burn its like trying to run a car on gun powder . hho =explosion petro = combustion . thus we need to buid an engine made for hydrogen not gas
i think the key is to use high voltage to do the work instead of amps. i keep seeing people adding electrolytes, and i think we are getting off track. i do like some of the cells you have made,good job
Man you r very smart. I am still new to this water4gas and all this i just discovered it yestarday. I plan on makeing this as a project. I Have 1 question what is wrong with having too many amps u got 40 on this coiled 1. I know it generates heat but what is wrong with that. Thanks so much for sharing your time with all of us.
you need 3 coils not 2. the 3rd coil is neutral so it is looks like this , + N - the neutral coil evenly spreads out the voltage so you get even HHO production. Have all the coils spaced at 0.05 of and inch and the voltage will evenly disperse through every bit of the coils.
obviously if you are using this in a car u will have to have a system of replacing the old water from hydrolysis,i think hydroysis makes some other nasty chemicals if u are using electrolytes,like a pump that puts new water in the cell after a certian time
I will using it ! Because we talking about how many square cm plate we use to produce enough hydrogen. Coil will increase your difficulty of producing it.
Why do you go trrough all the trouble of building a coil simply to connect it to a dc voltage? A coil is effective ONLY with alternative current; with dc current, it's the surface area that is important.
I built another fuel cell based on your spiral production technique. I used 1/8th inch galvanized steel for the spirals and i spaced the holes on the plastic 3/8th of an inch. The problem is with less than 1/4 of a teaspoon of sodium hydroxide the amperage level slowly rises and blows my fuse it blew a 25 amp fuse in 2 minutes. Any ideas?
Just put less sodium hydroxide. The problem is when you use more sodium hydroxide it does produce more hydrogen but it will also draw more amperage to produce the "more hydrogen".
I tried it with striaght tap water with the same effect. But I threw in a neutral spiral and hopefully it works better so far it has been blowing 30 amp fuses left and right.
can you just use salt water rather than electrolite?? i want to build a hrdrogen converter and dont know where to start, any help would be much appreciated thanks
You know, using a certain diameter coil you could get some frequencies, so varying the diameter, you could generate different frequencies. Maybe it's the key to the efficience.
thks,ammanninox, for the wonderfull experience.its verry intersting.only you do not tell us voltage and ampers demanded your generator!!and if it needed other electonics for the power?if yes,it will be nice to see it maked by your expencive hands!!thnks again.
I just found this writing it sounds interestingly intriguing:
Scientists and engineers accept the possibility that the current understanding of the laws of physics may be incomplete or incorrect; a perpetual motion device may not be impossible, but overwhelming evidence would be required to justify rewriting the laws of physics.
I hope to live long enough to see some of the laws of physics rewritten. Well things are moving!
this is great but where do you get the wire. In Australia as I have said on other vids we cant find this sort of stuff here. If we could it costs a fortune.
community effort needed, collective effort from interested community will help win this war faster. Anyone thot about using Capacitors for electric pulse discharge as compared to constant current drain. And maybe aquarium pump to feed the hydrogen into the carb. Constant and regular supply will eradicated fuel supply totally making the system 100% HHO based. Comments pls and no tech jargon from it cant b done sceptics....
good job. you can turn your coils without haveing to spread them after. if you place a coil as a template first you can wind your new coil in between the windings of the template to get your exact spacing to save time. just a thought.
I feel a bit ashamed that I forgot about it; I realized it a couple of weeks ago as I stated above on a reply to Subspace4d and I will post it with my newest video in november. Thank you so much for your remark!
Thanks for the video i learned so much as for your cell that zerofossilefuel they are right the electrons will travel the shortest distance hence you need to isulate the sides.
Hello, Thanks for the information and the perfect delivery of it. Your work looks great. It is laid out real nice. I hope to make a video of this quality myself someday in the near future.
Very good job - How did the stainless Rope do? You may want to use a center core of rolled up Stainless Screen as the negative electrode in the center.
Good job, and gotta love that Swiss hospitality, not one rude word, I should take lessons. Anyway what happens if you put a steel rod down the center of the coils?, like an electromagnet? Anything? Also I read long before Youtube exsited, that underground science was doing HHO better with low voltage, ever try it?
This is the very best youtube video because he utilized his entire time while speaking clearly with words we can all understand.
And in the end...he speaks out globals asking for help from the electronic people.
I barely understand what electricity is. Will my cell work better if I change the Wattage and also Voltage? Should I buy an Oscilloscope? Do I need to find out the draw from the coil? I'm still checking out the vids.
Zero Point Energy makes all the HHO units perform over unity. For example the HHO torch violates the laws of thermodynamics. Check out Tesla's switch and why it works.
Спасибо
e4edi 2 days ago
Has anyone tried high DC voltage? or is that overkill? I have a 4200VDC source that operates off 110VAC but have not had time to test it.
ralylo 3 days ago
is this worth installing in my car, or would you recommend a dry cell generator?
axelhansenmendes 4 days ago
Best job man...
peterlulek 2 weeks ago
Yeah, he is a good man. I was make my self hho like this, it's amazing production. Thanks to this man. :))))))))
BlackZeroRS 1 month ago
sir is that stainless steel? what size sir? thanks...
psp2009kim 1 month ago
good person, you fair man.. thank you so much for making knowing us...
psp2009kim 1 month ago
sir can u tell me is it works with alumineum coli and sory 4 my bad english if any mictake of spelling......
crazyashiq 2 months ago
looks like a good way to make springs, if used with head treatment
Films4You 3 months ago
that is really genius!!!
shortyjk95 3 months ago
This has been flagged as spam show
Ammanninox, er det muligt at købe et sæt af dig? kontakt mig på alex75@gmail.com
Alex75dk 4 months ago
Very clear instructions! Thanks for your video, did you see the tadpole swimming around in the jar?
That is the best production I have seen too, great job!
TheDarkeJ 4 months ago
πολυ καλο
SuperMixalis77 4 months ago
Very good
TheRealHecky420 5 months ago
Very detailed video. I was wondering if you were gonna show how to wind the pieces, awesome!
jtararo 5 months ago
Swiss = Intelligence Thank you for the educational video my friend.
weleplaya 6 months ago
danke wel...
apollo13fly 6 months ago
muy bueno...
mikecool386 6 months ago
If you want to stay at the same power rate, Make 2 more parralels spiraling in the other direction, Keep the circumfrance of the new spiral, 1 and 1/4 inches bigger than your original, then attach your same power supply in reverse to the new spirals, this will maximize output and at least quadruple production but im guessing ten times more efficient
TheBlokin 6 months ago 2
very tanks mister brother are very important information tanks realy and fredoom to now...
vidafusionable 7 months ago
Very good presentation.
TheSdenne 7 months ago
What is your largest LPM you are getting? I have watched a million videos on here, it seams like most work fairly well, it seems like the solution and voltage and Amperage is what can affect the out put. Am I wrong? Thanks!!!!
MNWVOer 7 months ago
@MNWVOer yes voltage is everything, i use a car stereo amp pulsated.. but you can use ac but it will explode if done wrong, but for auto you wanna try to use dc or low watt ac power that can be converted from the cars power
TheBlokin 6 months ago
What guage wire are you using?
Hueffed 7 months ago
thanks man and you are so kind to let us know how its can make
mbaqader 7 months ago
Olá meu amigo, moro no Rio de Janeiro, Brasil, tem como você mandar um diagrama de montagem com medidas e o material gasto, abraços de Amauri Correa da Fonseca, meu Email: amauri12009@uol.com.br
fonsecaamauri 8 months ago
"the state of the art"
hertz1984 8 months ago
cea mai tare de pana acum bravo nene miai dat o ideie super bravo
geonylove 9 months ago
Good and informative video. Would you say that coils/spirals are better than plates or vice versa? Or does it depend upon your configuration and power?
Itsmeeman1 9 months ago
Are you selling these?
DrQuigley1 9 months ago
So.......What is it for?
BlatendCrude 9 months ago
With as many jigs you have made to make the coil, here is one more I use for my chainmail. drill your holes in the turning pipe to make a slot, that will except 4 wires side by side tighly. so when you unwrap them they are already the correct distance apart for every turn you make. This means wires 1 and 3 have the same space between them to the right distance needed for the center wire holding jig. Also you could make a smaller set to fit in the middle as you neutral wire/plate.
edgev0nspike 9 months ago
Hi! I was made one from wire but vhen I put on the battery it's going crazy hot and start to malting the wire. Can u tel me what I did wrong?
jozsefboviz 10 months ago
@jozsefboviz maybe there is a short cut in your wiring, remind, you DO NOT connect the + and - pole together
isapsa 8 months ago
THANK YOU!! <3
phased3 10 months ago
Well! And what current is used for such productivity of the given unit? I mean volt, ampere.
Astronomia13 10 months ago
А по русски можно?
Astronomia13 10 months ago
I have a 6400cc truck we pay 1.45 litre @ 37 ltr per 100 klm ! thats more than $6.00 a gallon I will make this energy device to save me and the planet, What size would I need to effectivley reduce my feul consumption ? yes Amox nice nice nice work I am very inpressed with your tecniques and simplified explaination, Thankyou.
FLYMEOVER1 11 months ago
Comment removed
FLYMEOVER1 11 months ago
Is anybody producing 7 litres per Minute ?
I'd be really keen to get details of something pumping that much or more, if anyone can help.
Cheers
9761scott 11 months ago
Thanks for the demo. I made the spirals, it works great.
I have it in a 316 S/S canister but it gets far too hot, have you got any suggestions?
PeaceByJesusChrist 11 months ago
Comment removed
bangingrock 1 year ago
Excellent demonstration.
LoungeLizardLouie 1 year ago
Great job, and a great teacher, keep doing the good work.
I can see that you love what you do.
magrao97 1 year ago
gut erklärt und vorgemacht.
SirLandox 1 year ago
i thank you for this design i mad a simalar one by putting a large spiral agenst the walls of the container and a smaller spiral in the center it has the best results i have ever seen
blueeyesseto 1 year ago
het werkt niet ,,je kabels worden veel te heet,het water ook ,ook geen gasontwikkeling genoeg,,,,,,
its getting to hot,,, not many gas you need neutrals
TheFransfrans 1 year ago
This has been flagged as spam show
is it possable to use a brace coll in stide of a steal one ?
liplokker 1 year ago
is it possableto use a brace coll in stide of a steal one ?
liplokker 1 year ago
@liplokker yes and no u use stainless steal because other metals corode away in the HHO proces
blueeyesseto 1 year ago
Comment removed
blueeyesseto 1 year ago
very good
mialuk 1 year ago
hydrogen or orgone?
mikelson1988 1 year ago
You are a Genius man... thank you so mach (sorry my english)
IQmaza 1 year ago
I suspect flat stock would be better. It would give a more uniform surface to surface conducting path. Why 316? I used to work with that in machine shop, but I found that it was not the number one preferred version of SS in the real world. Another thing, I have considered that flat plates bubble so much that the flow of water is interrupted, and that means less production. So is that why you are doing spirals?
AmazGraz 1 year ago 3
@AmazGraz I did spirals because it intrigued me and they looked fun and were very tiny but there is too much energy converted into heat so I gave it up especially because my spare time is nearly zero. Thank you.
ammanninox 1 year ago
@ammanninox
too much heat, is caused because of no spacers and the additives in the water.
Also, keep the electrical connections out of the water and isolate the straight parts of the spiral. There's too much amps wasted over there, focus on the electricity only to touch the water (and thus amps being produced) on the spiral itself. Personally I do not believe additives are necessary in order to have a efficient production. The solution will be on tuning with electronics
brightmannn 1 year ago
espectacular la forma de explicar,yo no entiendo nada de ingles y sin embargo esto si lo entendi.si podes ayudarme yo quiero hacer uno igual y hacerlo funcionar en mi auto quisiera que me guies si podes hablelo en castellani me va a servir mucho. exelente. congratulations.sludos.
luisayalaful 1 year ago
Very , very, very good.
lccmartins 1 year ago
thanks,nice and easy to follow video
danjohnuk 1 year ago
Love the fake accent! you are really good. Plus love the tech skills. Keep it up
whatsdare 1 year ago
ok i got ya on my last q,may i ask how meny volts and amps are u useing,sorry for the last q i should have read and waited
imatelly 1 year ago
is this stainless steal
imatelly 1 year ago
This is a great video. its nice to see one with out stupid music in place of relevant information and people only trying to brag that they ruined a good cooler. thank you for the time you took to make this.
DarcyAerisWood 1 year ago
Did you build the Norway Spiral?
frankensteinmoneymac 1 year ago
@frankensteinmoneymac No... but I suspect those bloody bastards copied mine without asking me first..LOL
ammanninox 1 year ago 8
Awesome yet simple design...I've already built one with stainless plates, but I'll be trying this next..
HippyDave57 1 year ago
Wow. This is really high output. What's the ampere going through the coil? Where do you draw the current from?
cvl85 1 year ago
Great video! Very informative!
tangoseal1 1 year ago
i just realized, why not just make a double helix, having both leads begin at the top, and both leads terminate at the bottom? it will work, and work better i believe
LiquidChem 1 year ago
que bueno:)
clauagui1 1 year ago
Could you tell me what kind of wire (if there is a number etc)
Thanks!
angelheartchick 1 year ago
I have one word for this, Amazing.
Great piece of engeniering.
I love watching your video.
I'm soooo gonna try this design.
Greetings from Belgium
Erik
rikkiesix 1 year ago
This has been flagged as spam show
ok so whats the point of this?
ELKT90racer90 1 year ago
Excellent video! You might try this to help reduce the work required to produce the coils. As you are winding the stainless wire on your mandrel, if you place a spacer (that is the same width as the space between the coils on the form) at the wire as it is formed around the mandrel when you finish winding you will have a perfect coil or nearly perfect with no or very little adjustments needed
1foxtrot70 1 year ago
Скажите, что лучше использовать, спираль или трубы, какая конструкция даст больше водорода????
TheMrBorne 1 year ago
@TheMrBorne лучше использовать спирали. они имеют большую поверхность, таким образом они делают больше водорода
jvcrules 1 year ago
@jvcrules трубы имеют большую поверхность чем спираль, по конструкции труба в трубе, но изготовить спираль проще.
TheMrBorne 1 year ago
Can I use a old car battery? For HHO for the anode and cathode coils?
yolando007 1 year ago
is it possible for the anode and cathode coils to be at opposite ends of the generator and it still produce Hydrogen?
TheKeithProject 1 year ago
5 Балов -)
Nukliid 1 year ago
How many amps are you drawing with this particular cell?
@ taliban simply no could not have put it any better .... it will ruin your whole system electrolyte and all copper is highly corrosive whether using vinegar or KOH
xxbusaboyxx 1 year ago
Ammanninox , i would like to see you try wires on your spirals and know what you think of it !
keep up the works !
IamDiabolik 1 year ago
Very Helpful! You are a life-saver! You should definitely upload your video to this site, Ewisdomtv
susanbunch1980 1 year ago
Queria saber que aleacion de acero inox se usa (316 L ?) los aislantes de que material pueden ser? nylon, teflon?
Tendria usted planos de costruccion de estos y los demas componentes necesarios para un kit de auto?
Gracias por su video!!
I wanted to know that stainless steel alloy is used (316 L?) The insulating material that can be? nylon, Teflon?
Would you CONSTRUCTION levels of these and other components necessary for a kit car?
Thanks for your video!
andresperrotta 1 year ago
merci
Adristucru 1 year ago
Stainless steel washers offer more surface area and thus makes better production of HHO. Keep it simple always remember that, and washers are like 10 cents a piece and can be found in any hardware store. Keep it cost effective.
Iraqveterankill4real 1 year ago
This has been flagged as spam show
im building hho hybrid on my 2008 acura TSX EURO R 4 cyclinder with duAL VIPER hho CELLS ANY GOOD POWER SUPPLY ? i GOT MY EYE ON sTINGER AUDIO BATTERY
60 AH
DUAL 55AH PWM ENOUGH?
WHAT AMP ON CIRCUIT BREAKER?
EXgam3R 1 year ago
can i use coper wire??
please respond
talibanrules 1 year ago
NO....... very simple NO.... It will be destroyed in in a matter of minutes:::: you can try and you will see the results by yourself.
This is a hobby of TRYING remember.....
AMOX
ammanninox 1 year ago
awesome good one tnx..
matthan07 1 year ago
The class of clarity in this video is very exceptional in-close detail. The fabrication & welding is a ten.
As a kid 40 years ago, I used to play around like this, and was hoping to make my own wet cell batteries.
A bit risky in open air top small tank.
Cheers
Philscbx 2 years ago
Well this is very kind of you but since this is also the way I work in my every day life it is of no particular effort for me to do and I think if we all can add a bit of care to the video production we all obtain a usable quality with practically no extra work.
Thank you again and I am looking forward to present in spring time a new cell with very interesting characteristics naturally only if all the testing will be as successful as I hope they will be.
ammanninox 2 years ago
You very welcome, it's just rare to see this class of work being done similar to restoring WWII famous aircraft with radial engines.
It's cool to work with same type of thinking.
An aircraft comes in, and regardless who works on it or how difficult, it's perfection.
Philscbx 2 years ago
@ammanninox
What size tubing results in what size coil for the 0.125" 316L ss rod?
Regards,
Alden
AldenVT 1 year ago
@AldenVT Since we do it by hand it is a matter of testing and measure the results. watch my video number 8 there you will see the correct way to wind a spiral.
ammanninox 1 year ago
How many LPM does a spiral produce?
MrGwkj 2 years ago
good info ty
daveman351 2 years ago
is that stainless steel?were can i get stainless steel wire?
robotpredator8 2 years ago
This has been flagged as spam show
Gentlemen gentlemen, let me put an end to the arguement. Watch this video for absolute proof that it is IMPOSSIBLE for HHO to increase miles per gallon. Good stuff.
watch?v=5G9DAmt_jLk
EnergySupply2008 2 years ago
It seems that the most popular way of producing HHO lately is the brute force method using DC and an electrolyte. However, there is another way by which you need significantly less current and no electrolyte. This method makes use of a Resonant Electrolysis circuit.
While using the twin Helix as you have done in your design is probably one of the most effective and simple ways using brute force, Resonant Electrolysis has more potential to produce high volumes of HHO.
Check out Stan Meyer.
graceoverall 2 years ago
As you see by watching my videos I do not pretend to be efficient but by now I do agree fully and concur with you that brute force is easy to obtain and that there are definitely more sophisticated and intelligent ways to obtain more gas with less heat. To bad I am no good at electronics, otherwise I would love to dig into the Resonant Electrolysis, it looks fascinating to me.
AMOX
ammanninox 2 years ago
Nevertheless, great work! It takes many people with many different talents to make a good product.
Cheers!
graceoverall 2 years ago 6
Well what is the best design for effeicent and low heat creation?
mrcss 2 years ago
I would say based on my own research and readings, the Resonant Electrolysis technique seems to be best. Of course it requires a bit of circuitry that you have to make so it's a bit more involved, but if you work at it, you can certainly do it.
You have to recognize that Watts are actually a measurement of heat. So if you put more voltage into the system and use an electrolyte to increase current, well then you get more heat.
Great fabrication lesson ammanninox. Thanks for the vids!
graceoverall 2 years ago
Why my device is geting so hot? Is that normal?
jr7495 2 years ago
Yes it is normal if it is a spiral or a single plates + and - , because you pass more energy through the water than is needed to make the separation into HHO and that energy leftover heats the water. Some use PWM's to reduce heat, and some change design of the cell. I changed my cell design. Heat is a sign the cell is not working efficiently.
AMOX
ammanninox 2 years ago
thanks. very good
RichUnclePennybags90 2 years ago
Thanks. GOOD TEACHER.
kwokwing 2 years ago
this is a very good way to make those coils your a very smart man!
blankpanic 2 years ago 2
nice. like this preferred to my rod idea. 3 pos. to 18 neg. please enjoy and stay safe!
VictorianSeraph 2 years ago
This has been flagged as spam show
DIY Its work DoublerVoltage In12V to35V, out 24Vto 76V circuit fr. ElecFree com "search 12v to 24v dc to dc converter IC 40106, change BYWS1P1-200 to FT2000G n all the Capacitor into higher value, work very well together with PWM G Forrest Cook, all MosFeT using IRF250 w/Big Heat sink , 30Amp Max. for any HHO Cell thks :)) NO MOre Limited 12V fr.CarBattery
Drdump1 2 years ago
Absolutely excellant!
You're an excellant teacher.
To lower the amperage used you need to apply a high frequency to the coil.
You do this with a variable frequency, high current circuit. With a amp meter connected, slowly increase the frequency until you see a null,(a drop in amperage). This is now a "tuned" circuit with alot less current draw.
quantumsignature 2 years ago 2
jeeze you guys are negative, whats wrong with almost doubling mileage in your engine? huh?
Mrpantymelt 2 years ago
Comment removed
oddssodds 2 years ago
tryed production in or under vacuum
blackle4ps3 2 years ago
excellent video.... top notch!!
jihadpizza 2 years ago
heat? amps? very neat stuff thanks from Indiana USA
jones13186 2 years ago
nice job. how many amps is that pulling??
technic58 2 years ago
Just want to say very nice job!
mdivinc 2 years ago
that is brilliant! try running 3 shorted (connected to one another) neutral wires in between the positives and the negatives and i think you will win the science fair! hey! you tube should have a science fair with prizes!!! wooo!
mastereyeball 2 years ago 2
hi man iamnew in this iwant to now that how many AMPS want to drive a 1600cc car
scchiao2000 2 years ago
By all means carry out your own research and experiments but please, please realise you will can't run a car engine purely on HHO since the laws of electrotrolysis means you would need a huge electrical current and/or lots of time to make the gas. Even small IC engines as fitted to strimmers, mowers, chainsaws etc won't run for more than a few seconds at best. An engine needs more fuel/air mix that the HHO process can generate.
TK42138 2 years ago
yes i love the hho idea i have bin building them for years ..how ever people need to under stand hydrogen is a dry fuel it needs to be blended with some thing to slow down the burn its like trying to run a car on gun powder . hho =explosion petro = combustion . thus we need to buid an engine made for hydrogen not gas
arizonachristian 2 years ago
thank you sense
arifingunawan80 2 years ago
oi
your explain this alot more better then any one else i seen on here
and i am going to do this this weekend and its ganna work and its ganna be awesome
can you use plates too or is the spril way better for this ?
IAMDAVEAMI 2 years ago
you us way to much Soda lol
typeXJuggernaut 2 years ago
Thanks for the fantastic detail explanation.
excellent job.
Matt.
sharonpepshow 2 years ago
Great idea using the wire! Thanks for posting!
sebring98 2 years ago
Look I live in switzerland. How much for you to build me one?
bronxboyXXX 2 years ago
i think the key is to use high voltage to do the work instead of amps. i keep seeing people adding electrolytes, and i think we are getting off track. i do like some of the cells you have made,good job
phsharon 2 years ago
Man you r very smart. I am still new to this water4gas and all this i just discovered it yestarday. I plan on makeing this as a project. I Have 1 question what is wrong with having too many amps u got 40 on this coiled 1. I know it generates heat but what is wrong with that. Thanks so much for sharing your time with all of us.
azizeqab 2 years ago
you need 3 coils not 2. the 3rd coil is neutral so it is looks like this , + N - the neutral coil evenly spreads out the voltage so you get even HHO production. Have all the coils spaced at 0.05 of and inch and the voltage will evenly disperse through every bit of the coils.
RappelzFighter 2 years ago
obviously if you are using this in a car u will have to have a system of replacing the old water from hydrolysis,i think hydroysis makes some other nasty chemicals if u are using electrolytes,like a pump that puts new water in the cell after a certian time
dilon068 2 years ago
I will using it ! Because we talking about how many square cm plate we use to produce enough hydrogen. Coil will increase your difficulty of producing it.
Plates much more easier !
wawan0001aaa 3 years ago
Why do you go trrough all the trouble of building a coil simply to connect it to a dc voltage? A coil is effective ONLY with alternative current; with dc current, it's the surface area that is important.
MIC960 3 years ago
Very interesting stuff.. I was just wondering if the number of turns, exact diameter and length of the spiral was important?
cvnss89 3 years ago
I built another fuel cell based on your spiral production technique. I used 1/8th inch galvanized steel for the spirals and i spaced the holes on the plastic 3/8th of an inch. The problem is with less than 1/4 of a teaspoon of sodium hydroxide the amperage level slowly rises and blows my fuse it blew a 25 amp fuse in 2 minutes. Any ideas?
wzp311 3 years ago
Just put less sodium hydroxide. The problem is when you use more sodium hydroxide it does produce more hydrogen but it will also draw more amperage to produce the "more hydrogen".
prarriefarmer 3 years ago
I tried it with striaght tap water with the same effect. But I threw in a neutral spiral and hopefully it works better so far it has been blowing 30 amp fuses left and right.
wzp311 3 years ago
can you just use salt water rather than electrolite?? i want to build a hrdrogen converter and dont know where to start, any help would be much appreciated thanks
HACKETT6205 3 years ago
You are mechanically talented. I appreciate your information and ideas. Thank you for sharing.
dmgcat 3 years ago
i build a spiral electrode and the cell create a lot of heat.
skycollection 3 years ago
I know I had the same problem in my video #8 we should submerge the spiral or better change to plates construction!!!
Thank you AMOX
ammanninox 2 years ago
Amigo, con solo ver sus experimentos, las cosas mas dificiles se hacen las mas simples, es usted un genio.
challanbaygon 3 years ago
can you tell me what two metals are you using
cartasav 3 years ago
hes hungarian ;)
alteans 3 years ago
Man, if I had your shop, you are extremely talented. P.S. I have the same welding hood LOL
steveshouse71 3 years ago
How many amps is passing throught the coils in this video?
hazzelarator 3 years ago
This is the best video I have seen on HHO, excellent. Nice work.
I may not try to improve my gas mileage but I may make a welding torch. HHO welding seems to be a safe and efficient way to go.
Thank You.
Tubeittome 3 years ago
Thank You , You have inspired me! I am starting my project JAN 1st!
70fury3 3 years ago
You know, using a certain diameter coil you could get some frequencies, so varying the diameter, you could generate different frequencies. Maybe it's the key to the efficience.
Nonetub 3 years ago
Thanx for the excellent and informative video.
myfunnyguy 3 years ago
nice job and advice how to make coil for e.g. antena to transceiver
cezarybusko 3 years ago
hehehe awsome accent lol
mvlady 3 years ago
thks,ammanninox, for the wonderfull experience.its verry intersting.only you do not tell us voltage and ampers demanded your generator!!and if it needed other electonics for the power?if yes,it will be nice to see it maked by your expencive hands!!thnks again.
telecom666 3 years ago
I just found this writing it sounds interestingly intriguing:
Scientists and engineers accept the possibility that the current understanding of the laws of physics may be incomplete or incorrect; a perpetual motion device may not be impossible, but overwhelming evidence would be required to justify rewriting the laws of physics.
I hope to live long enough to see some of the laws of physics rewritten. Well things are moving!
AMOX
ammanninox 3 years ago
Yes, almost all theories in common physics are incomplete or incorrect. Ask Tom Beardem about this and you will know his radical answer!!
Nonetub 3 years ago
thank you
ESPIN66 3 years ago
Thanks amox, it seems so easy and efficient
the way you produce hydrogene to convert our cars into hybrid...
please let me know your email that I would love to buy one of your generators ...
have a great day
captain
capoguz 3 years ago
thank you for showing me this technique to wind coils. I will use it for other thing than HHO.
Subspace4d 3 years ago
Thank you
I just found by trying out something else, the "right" way to wind the coils I will show it on my video #8 that will come in november
AMOX
ammanninox 3 years ago
yes I wish more ppl where like you and would show their techniques. So humanity would get to hightech age faster.
Subspace4d 3 years ago
this is great but where do you get the wire. In Australia as I have said on other vids we cant find this sort of stuff here. If we could it costs a fortune.
nickgc123 3 years ago
great video ,Nice design
Slick1G3 3 years ago
community effort needed, collective effort from interested community will help win this war faster. Anyone thot about using Capacitors for electric pulse discharge as compared to constant current drain. And maybe aquarium pump to feed the hydrogen into the carb. Constant and regular supply will eradicated fuel supply totally making the system 100% HHO based. Comments pls and no tech jargon from it cant b done sceptics....
shanokhala 3 years ago
good job. you can turn your coils without haveing to spread them after. if you place a coil as a template first you can wind your new coil in between the windings of the template to get your exact spacing to save time. just a thought.
sparten1114 3 years ago
You are so wright!!!
I feel a bit ashamed that I forgot about it; I realized it a couple of weeks ago as I stated above on a reply to Subspace4d and I will post it with my newest video in november. Thank you so much for your remark!
AMOX
ammanninox 3 years ago
lol
Dutchymax 3 years ago
fantastic, you're a genious. thank you soo much
2bigpower 3 years ago
Thanks for the video i learned so much as for your cell that zerofossilefuel they are right the electrons will travel the shortest distance hence you need to isulate the sides.
blackIce504 3 years ago
Hello, Thanks for the information and the perfect delivery of it. Your work looks great. It is laid out real nice. I hope to make a video of this quality myself someday in the near future.
Great Job.
markm330 3 years ago
what is the length of the stainless wire?
dwall199 3 years ago
perfect thanks.your video is very eficient and clear
atapaz79 3 years ago
THANK YOU...very much!!
alex681219 3 years ago
Very good job - How did the stainless Rope do? You may want to use a center core of rolled up Stainless Screen as the negative electrode in the center.
Good luck thanks for your efforts.
SpiritualMisfit 3 years ago
good job !!!!!
azazzzzzz 3 years ago
Good job, and gotta love that Swiss hospitality, not one rude word, I should take lessons. Anyway what happens if you put a steel rod down the center of the coils?, like an electromagnet? Anything? Also I read long before Youtube exsited, that underground science was doing HHO better with low voltage, ever try it?
PhuqueU 3 years ago
This is the very best youtube video because he utilized his entire time while speaking clearly with words we can all understand.
And in the end...he speaks out globals asking for help from the electronic people.
I barely understand what electricity is. Will my cell work better if I change the Wattage and also Voltage? Should I buy an Oscilloscope? Do I need to find out the draw from the coil? I'm still checking out the vids.
arcanedataflow 3 years ago
...bye petroleum, :)
kumarabolivia 3 years ago
Zero Point Energy makes all the HHO units perform over unity. For example the HHO torch violates the laws of thermodynamics. Check out Tesla's switch and why it works.
violentpumpkin1