i broke in the engine of my baja 30.5cc as drive it but no going over half throttle and make sure its on the road this isn't how to break in a baja engine you obvs didnt read manual or look up a good way didn't you
@Beinl Das ist kein Problem, der motor geht einfach aus, weil er keinen Sprit hat und dann kannst du ihn anschließend auftanken und weiter fahren. Der Motor kriegt dann für minimal kurze Zeit zwar keine Schmierung mehr, aber das ist völlig egal
Also man sollte den Motor kurz mal im Standgas laufen lassen, dann langsam rumtuckern mit wenig Drehzahl und nach 10 Minuten dann schon etwas schneller fahren und nach einem halben oder 3/4 Tank kann man schon mehr Gas geben und beim 2. Tank kannst dann schon langsam vollgas geben.
(rc-modellbau-blog.de) da kannst du mal nach "Benziner einfahren" suchen, gibt's nen Artikel von mir zum Thema ;)
30.5cc kit and a stock pipe.. that thing you have on that is not really a pipe.. muffler. anyways as i was saying get a new pipe man.. get the speed you desurve you building a very nice baja! (:
Thx man just saved me a few bucks...also a friends of mine bought the 36mm piston and cylinder& dominator for his 23cc, susprisingly i was faster although i have the 26cc stock/dominator...!
The price is a bit higher an ported means, that the inner motorparts are flow-optimated. The fuel and fuems have a better flow because of some milled gaps. I don't feel much of it, but it sounds nice in the name xD
Na bei 30,5ccm ist das auch kein Wunder das der so eine Kompression hat. Du hast die Kiste aber nicht im stand einlaufen lassen oder? Das ist nämlich garnicht gut für den Motor
i broke in the engine of my baja 30.5cc as drive it but no going over half throttle and make sure its on the road this isn't how to break in a baja engine you obvs didnt read manual or look up a good way didn't you
phsycosniper8 2 weeks ago
hab ma eine frage ... kannst du den pitbull X für neu einsteiger empfehlen?
hardbaselover20 2 months ago
Try priming it ........or choke
TheJackeyboy 11 months ago
That's not how you break a petrol in, you simply drive it around at a low speed for a tank. It aint a nitro.
m3lyc 1 year ago
Geiles Video, gefällt mir.
akumula 1 year ago
ist das gut wenn ich meinen baja ss leerfahre das er abstierbt
Beinl 1 year ago
@Beinl Das ist kein Problem, der motor geht einfach aus, weil er keinen Sprit hat und dann kannst du ihn anschließend auftanken und weiter fahren. Der Motor kriegt dann für minimal kurze Zeit zwar keine Schmierung mehr, aber das ist völlig egal
nexxxx5299 1 year ago
ja habe eine frage kann man einfach so den tank leerfahren is das gut oder nicht fürn baja ss
Beinl 1 year ago
Also man sollte den Motor kurz mal im Standgas laufen lassen, dann langsam rumtuckern mit wenig Drehzahl und nach 10 Minuten dann schon etwas schneller fahren und nach einem halben oder 3/4 Tank kann man schon mehr Gas geben und beim 2. Tank kannst dann schon langsam vollgas geben.
(rc-modellbau-blog.de) da kannst du mal nach "Benziner einfahren" suchen, gibt's nen Artikel von mir zum Thema ;)
nexxxx5299 1 year ago
@nexxxx5299
hallo habe eine frage ist das gut wenn ich meinen baja ss leerfahre das er aus ist?
Beinl 1 year ago
wie viele tankfüllungen brauchst du für die einlaufphase ?
und kann ma bei der erste tankfüllung schon fahren ?
TheColt1911 1 year ago
That was soooooooo bumb you just wasted a s--- load of my time
extrememotorsinc 1 year ago
30.5cc kit and a stock pipe.. that thing you have on that is not really a pipe.. muffler. anyways as i was saying get a new pipe man.. get the speed you desurve you building a very nice baja! (:
crazyudder 1 year ago
züdkerze ?
CpgNeo 1 year ago
30,5 ccm is monster, not very nice to drive!
ammenberga 1 year ago
fuß vorsichtig oben draufstellen, dann kann man besser "anreißen"
alex96423 1 year ago
das kenn ich mir geht es genau so =)
243master 1 year ago
i buy you old car $ you wand
prieto255 2 years ago
which old car? ^^
i build in a new motor in the baja. It's not a complete new model...
nexxxx5299 2 years ago
you mean spark plug.... Glow plugs are for nitro
eller97 2 years ago
Thx man just saved me a few bucks...also a friends of mine bought the 36mm piston and cylinder& dominator for his 23cc, susprisingly i was faster although i have the 26cc stock/dominator...!
Osramiko 2 years ago
Could u plz tell me the difference between ported/unported? (in power& meaning) and y is there a difference in price?
Osramiko 2 years ago
The price is a bit higher an ported means, that the inner motorparts are flow-optimated. The fuel and fuems have a better flow because of some milled gaps. I don't feel much of it, but it sounds nice in the name xD
nexxxx5299 2 years ago
Why wasn't it starting...?
Osramiko 2 years ago
Too much fuel, I took the glowplug out, pulled a few times, to get the fuel out of the motor an then it worked nicely. :)
nexxxx5299 2 years ago
bro can u tell me whats the product number of your bigbore kit when u bought it to DDM?
dotbadburn 2 years ago
i'm not sure. you can search some online-shops for:
"30.5 o'neill big bore kit" (with +2mm Crank"
nexxxx5299 2 years ago
great workout
basgetz 2 years ago
Na bei 30,5ccm ist das auch kein Wunder das der so eine Kompression hat. Du hast die Kiste aber nicht im stand einlaufen lassen oder? Das ist nämlich garnicht gut für den Motor
ice2023 2 years ago
Passt schon, eine halbe Stunde bei leichten Gasstößen und er läuft auch heute noch richtig geil ;)
nexxxx5299 2 years ago
wie wars mit Standgas am motor verändern????? nooooooob
Blingbling47966 2 years ago
Good Job !!
Kyxis 2 years ago