i need help it worked fine for awhile then for some reason on the 4th tank when i screwed it in it just leaks i wasted two tanks already then i stopped trying.
@DemonicSamurai6 look up into the mag from the bottom. does the needle that punctures the tank look bent or chipped? cause if one of the cartridges was defective it couldve screwed up the needle. where is it leaking from?
@arigato81596 Yes, you must push down the ejection port (middle of slide) and you can slide the top back with some shimmying. This is good in case if you wanted to lubricate parts or see the internals.
bought one on your word the second CO2 i loaded in it made the mag start to leak. now the back freezes and lets out over half the CO2 rite after I put the cartridge in it...
@kenfan1 I know my friend has the same pistol and one of the spares he has was a fluke. I'm not sure about the problem you're having. I did some googling about the problem, and some people came up with that the o-rings inside the piston can wear down or become "unseated". This can be a bit complicated, but do so at your own risk if you wanted. I'm gonna PM you where to get a replacement
@luke5589 Glad you enjoyed it. I'm hoping to get some setup with a microphone so I wont have the shitty faded out voice audio. More reviews to come. :)
Watch my review on my account
Gfordawesome 2 months ago
how do you adjust hop up!!!
k00lew 2 months ago
That are he probably screwed the bolt part in that holds the co2 in the mag and screwed it in to much
damexican574 2 months ago
i need help it worked fine for awhile then for some reason on the 4th tank when i screwed it in it just leaks i wasted two tanks already then i stopped trying.
DemonicSamurai6 2 months ago
@DemonicSamurai6 look up into the mag from the bottom. does the needle that punctures the tank look bent or chipped? cause if one of the cartridges was defective it couldve screwed up the needle. where is it leaking from?
silentsniperrr 2 months ago
i got red sight
13rapheill 3 months ago
I just bought mine and it said on the package that it had hop-up but i dont know how to get to it.
masm00284 3 months ago
@masm00284 I think it just means it has a built in non-adjustable hop up.
silentsniperrr 3 months ago
i have one and the slide dosnt come back
gmodman0024 4 months ago
does the slide come back?
arigato81596 4 months ago
@arigato81596 Yes, you must push down the ejection port (middle of slide) and you can slide the top back with some shimmying. This is good in case if you wanted to lubricate parts or see the internals.
silentsniperrr 4 months ago
bought one on your word the second CO2 i loaded in it made the mag start to leak. now the back freezes and lets out over half the CO2 rite after I put the cartridge in it...
kenfan1 4 months ago
@kenfan1 I know my friend has the same pistol and one of the spares he has was a fluke. I'm not sure about the problem you're having. I did some googling about the problem, and some people came up with that the o-rings inside the piston can wear down or become "unseated". This can be a bit complicated, but do so at your own risk if you wanted. I'm gonna PM you where to get a replacement
silentsniperrr 4 months ago
your reviews are awesome dude! keep up the good work!
luke5589 5 months ago
@luke5589 Glad you enjoyed it. I'm hoping to get some setup with a microphone so I wont have the shitty faded out voice audio. More reviews to come. :)
silentsniperrr 5 months ago