how to make a homemade motorized bicycle update!

[Kpilot786457]

hey i got a 32cc crafts man! does urs have a auto clutch and all u do is prime 10x and pull ?

[Marigada]

LOOK MOM!! THE BIKE FROM WATERWORLD!!

[chickenpuffs1311]

"it was bending, so i had to put that on there... so it wouldnt bend anymore..." such and enthusiastic person

[SuperBrianhall]

hey how did you mount it?? because i have a 31cc and i cant figure out how to mount it

[fairyheli2]

@SuperBrianhall once you build one you will be able to build any motorized bike. I can build one in about a couple of hours now, but i did get 1 bit welded.

[fairyheli2]

what's on the friction drive roller??

[NathansBackwoods]

ALSO IN THIS VIDEO, How to be a stoner hippie, and how they travel.

[luisinvents772]

NOW IT WORKS GUUD!!!!!!!!!!!!!!!!111

[Watsupwiya]

I keep repeating myself, but The "BSA Cyclemaster" nailed this, by design, 70 years ago, and it hasn't been bettered since, and there's a fortune to be made replicating this item

[Watsupwiya]

Would you want your "wedding tackle" that close to that idea !!!!

[saab16guy]

it seems to me he is getting alot abuse why? at least he is trying its probarbly entirely made out of scrap good luck

[eclipsemoonlight]

Hehehe pregnant fat kids

[soverato3]

new tire? looks like you go through a lot of tires

[kdc43]

Yeee-HAAAAA!!!! An Arkansas Walmart Redneck Motorcycle!!!!!!

[Spassari]

Fucking Red Necks xD

[niemaya]

damn your stoned as fuck

[soverato3]

why nobody is using a clutch???

[JasperandMosbey]

how did you attach your spindle?

[Jejh4lom]

Douche bag

[shawndw151]

that setup is very shitty...you are using friction drive...wont be too too long before ya gotta get another new tire, plus the engine isnt shitty, friction drive uses alot of downpressure to get the bike moving, and that takes alot of power away from the engine

[jldwolfe]

@shawndw151 Lets see you build better :D

[shawndw151]

@jldwolfe already working on it... got a whole jackshaft assembly im making plus welding a new sprocket to the rear wheel hub on the one way clutch...and making a new sprocket for the drum on the clutch of my chainsaw..and the motor is gonna be mounted on the lefthand side of the rear wheel : D its awesome...just gotta get a few more parts and i can finish welding the damn thing together and take it out for a spin...its gonna be a system of sprockets and gears...not just a stupid shaft

[shawndw151]

@shawndw151 oh yeah...one more thing XD the sprockets that im putting on have a specific gear ration which will alow me to do an average of 30mph and also have a fuel economy of 196 mpg :P

[shawndw151]

ratio*

[jldwolfe]

@shawndw151 congrats. Hope some random internet troll doesn't post ignorance on you video about it. Kind of like you did here.

[shawndw151]

@jldwolfe eh...im not posting a vid of it...dont have the motivation XD but i wouldnt care if they did...criticism is sometimes a good thing...and sometimes ya just gotta suck it up and use it to improve

[xtopherwood]

WHEN YOU WEAR BAGGY CLOTHING DOESNT THAT GET CAUGHT IN THE SPINNER OR DO YOU JUS GO SHIRT NAKED ALL THE TIME

[lngbrdsrcool]

thats retarded

[austinsfarm]

how in the hell do u gas it up? dumbest engine position ever

[spitzification14]

@austinsfarm lol

[jldwolfe]

@austinsfarm Stand the bike up and fill the tank. Think before you let your ignorance show ;)

[Level5chris]

you sound stoned =[]

[X92Exploder]

quick build but that type of setup as I'm sure you've noticed chews up tires too much, would be better if you moved it up and connected it to the front crank so you're able to use your gears and would improve your drive-ability with it. But if its just a runner here and there or something to screw with then its alright.

[moekakke]

Tick tack tick  tack... you must be wrecked by now !!

[rustymotor]

Nice build, I used a weedy engine, older style and kept the centrifugal clutch and pull start. I also ran it on the back tyre and using the clutch made it easier to stop/start as it wont drive when idle. I made up a throttle set up on handle bar and the setup was ok but I always had problems with the motor going out of tune. Your Vid has inspired me to revisit my original build, Thanks!

[CLAUDIOPEIXOTO]

Gambiarra genial!!

[dogmagt14]

why do never have a shirt on

[davaro46]

CRAP

[06mourag]

hope the engine overheats!

[Watsupwiya]

You are having a giraffe, what do you do, put a new tyre on it every day, after you've removed all the bits of other people's children and items of your own clothing from it

[skidooguy1410]

pull your pants up

[cheezman211]

What speed range did it have?

I'm building my own and i need to get the gear ratios right.

Keep up the good work :)

[ivanlishev]

very stupid idea

[idrivesafe]

check out my page... i made a chainsaw bike with a Homelite 240 + I built a real pipe for it !!!

[Ganthug07]

Hey please reply to this I want to know where you can buy those springs and the flat metal pieces that you have on the bike axel mount.

[mag2395]

just take a spring from a trampoline thats what i did

[Banhammarz]

how do you accelerate? could you message me how or reply on my comment?

[robinhooodvsyou]

Watch how he starts it, I bet it doesn`t go backwards.

[godisgayy]

I have shit out better sounding things..

[andy72xbox]

@godisgayy lol

[vigu008]

i have to of them one with the sproket and the oder one is like tha and evry 4 runs i have to change tires,

[aleksankazakov]

not realy a good idea to put the motor against ruber tire. its gonna distroy tires faster than you think and still not gonna get enough traction. you need to chain it.

[xixero303]

not really a how to vid :/

[frankster262]

@xixero303 its how to make an update lol

[mikeycomputer]

Should the clutch be working? It should only start moving at higher RPMs.

[iPodTouchDIY]

there is no clutch

[Astro29]

@mikeycomputer there is no clutch, it runs directly off the motor's magneto flywheel (which is turning clockwise) you'd have to mount the engine so the wheel is turning clockwise otherwise it'll ride backwards lol.

[CristianR503]

that shit rides backwards doesnt it

[zumazuki]

I just bought a bicycle motor kit from ebay

[sandokanSK]

what is the engine?

how many miles you have traveled?

[tomman248]

how did u make the spindal??

thanks

[randomfreak9865]

how plz tell me how did you make that.

[Tdogg161616]

Where did u learn how to build it?

[ZazzaWueMAX]

....with all the junk I can see in the background I'm sure U could make something a lot better.... thats absolutely not a way of trasmission! come on!

[Mzege]

R u stoned man?

[ihelk]

spindles ware out your tires id go with chain drive

[caballero229]

man du hast ne 8 im rad

[steven78203]

LOL -More grip on my spindle.Your gona hit a pot hole one day and that spindle's gona grip that @SS! By the size of that spring it kinda looks like a slingshot aiming for a target.

[GT03235]

getting drive by putting pressure on the tire is going to kill that motor quick as it will trash the crank bearings

[zink669]

your smart, how do you turn it off?

[GreeseMonkeyy]

choke it

[MatrixTime69]

LOL.... " Its a little bit quiter TOO"

[roscoethesk8r]

does that wear out the tire fast?

[jonyrock]

a quick build, but not a smart one, bigger gear on motor and small gear on bike equals more revolutions on the wheel than on the motor which means better fuel economy plus a higher top speed...

[CCDProductions]

i didn't care about speed and gas mileage, i just wanted something to ride around on

[jonyrock]

well alright man, whatever works for you, great job 2 :)

[serdar255]

less torque

[lawnmowerTim]

@jonyrock if you care about gas mileage then dont put a motor on your bike to begin with lol

[jldwolfe]

@jonyrock You know nothing about what he built. This is a very clean build. Especially since it looks like he used scrap to make it. The "gear ration" of a frictions drive like this works different then if it was chain or belt driven. All that matters in this is the size of the roller. It has been proven time and time again by those that actually build and ride them. not by trolls such as yourself who think they know.

[jonyrock]

@jldwolfe yea you dont know shit either, and looks like you're the troll to me, leave people alone hater >.>

the guy who posted the video made a kind reply to my comment even if i was not as polite with my comment, unlike you, leave us alone troll

[JameZCody]

@jonyrock in this case, if the gear on the engine was bigger then the gear on the wheel... it would not have enough power to pull out or even pull itself period.. Too small of an engine.

[angrygunsmith]

@jonyrock more often than not that means not getting up most hills

[shortizahn]

yeah thats cool

[Mirozenx]

how fast can that thing go?

[cbradiotechman]

why did you get a smaller motor???

[crazystim]

wow, very smart but where are the breaks? how do you stop?? lol

[CCDProductions]

i used my shoes for breaks

[xPiiNGUx]

@CCDProductions

erm lolllolllol

[braaaaapppp250]

would b alot better with chain+sprockets

[karmabike1911]

luc59457 looks like your setup :)

sorry i forgot yours is a currie lol muhahaha

[luc59457]

Well, the child karmabike1911, I expect your useless comments, so whatever

[luc59457]

Besides, every time you say something like that, It only gets people curious in all the good stuff I have, that you don't muahahahha lol Thanks Karmabike911

[tritonmole]

where did you got that motor?

[luc59457]

Looks like a wipper motor or something similar. It that case, there are many places to get it. I guess you can have fun for a bit until the tire blows hehe.

[March23boyz]

ahahahah rofl exacttly

[CCDProductions]

the tire is still works

[tritonmole]

i was pointing on adding chain on bikes cogwheels, and remove pedals.

[Jonni904]

Good idea. But sooner or later the gum will burn away.

[luc59457]

You need a clutch for when idling

[luc59457]

Rigging 101 LOL come see my videos plz, great job.

[therocksaw]

How do you make these things. I'm trying to put a motor on my bike, but i can't do it right!!! HOW!!!!

[vbrown8791]

this bike inspired me and have built onekinda like it and will try to get a video

just an idea that 2 stroke will run in reverse so mabey 2 engines are better than one

[nibbler125]

im building my bike project right now. fortunitly i have acces to a lathe so thats how im building my spindle

[CCDProductions]

this summer i'm building another one, but this time its going to be belt driven to a jackshaft, and then going to a chain. its going to have a small briggs and stratton motor.

[GreeseMonkeyy]

did your mount ever break?

[CCDProductions]

no, its mounted on a 16 inch bike right now but it has some carb problems so it hasn't been running for awhile

[GreeseMonkeyy]

i mounted mine just like yours and it cracked the engine were it was mounted

[GreeseMonkeyy]

it was because my spindle sucked!!! but ill definantlly make another one and ill make a video of it

[GreeseMonkeyy]

ya it was workin well but the engine slipped off the weel and the flyweel hit the bike frame and the fly weel exploded

[CCDProductions]

dude! crazy, the flywheel rubbed on the tire all the time under deceleration, but it never exploded! be careful please.

[GreeseMonkeyy]

but theen i remounted it and it was exactlly like urs

[CCDProductions]

sweet dude, does it work well?

[GreeseMonkeyy]

my engine mount cracked :(

[CCDProductions]

lol

[ducatiluke]

there is no cooling to the engine

it wont last long

i know ive made a heap of ryobi powered bikes and there not the best

go 4 cycle

good stuff though

[DSishere123]

u should try mounting the motor in the middle of the frame. i know it sounds weird, but if you get a clutch like ones on a go-kart, and use a belt or chain to the sprockets, you can pedal the bike like normal, then when you start the engine it will engage the clutch and it'll take off, also you will get better air circulation, because the engine won't be behind your legs.

[CCDProductions]

i'm too lazy to make something like that

lol

[bmx01995]

ur rim is bent

[30GB]

hey you might want to make the shroud for that or your going to kill the engine with out no cooling

[CCDProductions]

i know it will overheat.

but i only ride for short distances, and at about 15-20 mph, so i think cooling should be alright

[sunnycloud69]

How'd you get the spindle on the engine cuz im having problem with the engine cuz the clutch is covered in a small shell of metal thats attached to the clutch how do u take off the clutch ?

[CCDProductions]

have u removed the c-clip to the clutch bell?

why not just run the the clutch to the tire as friction drive?

do u still have the pull starter with the cover removed?

[carouselkitten]

The fins on the magneto are a fan to cool the engine. But you don't have the shroud on for the impeller type fan to work and direct air flow over the cylinder fins. I wouldn't try driving to Mexico "you might not make it"...I made one of these 3 years ago with a snow blower engine and a 3 wheel adult tricycle.

[CCDProductions]

yeah i only rode bout 1 or 2 miles at a time.

it definetly got hot!

thats sick.

[skootb2]

how do u start it

[CCDProductions]

u pedal an the tire turns over the motor and it fires right up

[jack9102]

u gotta change the drive method.

how many tires have you blown using that idea?

[CCDProductions]

none.

[CCDProductions]

yet

[jack9102]

ya thats wat i thot. still, it'll get u around... for a couple kms anyway...

[CCDProductions]

have you ever tried this kind of drive method? i rode this bike bout 5-10 miles a day. as long as u have a grippy spindle and strong tension it will last.

[hardyzard369]

lol loox fuuny

[MinuteMaidDrinker]

This method doesn't work to well. Use a chain instead of the drive going straight to the tire.

[CCDProductions]

i agree, if you have the money an knowledge go with a chain drive.

[ledfootjohnny1]

It slices it dices and add a set of wings and your the man.I'm gona try this with the crap I have layin around

[CCDProductions]

go for it man, and post a vid of it. i had a lot of fun riding this bike until i lost the mixture screw :(

[MoPar7055]

Cool man

[cameronnoremac1]

what the heck...

wheres the ad?

[CCDProductions]

i'm waiting for approval from youtube partnership.

[sonicjoydivisonswans]

where are the ads?

[CCDProductions]

i'm waiting for approval

[sonicjoydivisonswans]

I want to see what kind they are... maybe it's gonna be hannah montana toothpaste... how much are you getting paid?

[CCDProductions]

idk. i just did this for the heck of it.

[sonicjoydivisonswans]

I think I'm going to go to sleep now... I'll call you tomarrow.

[Cr4ckCoca1n]

hell buckled wheel

[stumpknocker9]

Quite a cool machine.Youve inspired me to start looking for and old used junker to start my project with.Good luck and keep up the good work!I can tell by the response that some folks are quite jealous of your mechanical ability.Keep up the good work.Stumpnocker9

[MagicPup69]

why do u need to show ur whole yard fucken dickhead

[CCDProductions]

?  .

[saadams13421]

what did you use to put grip on your spindle

???

[CCDProductions]

a welder. i just did random spots all over it. easy as that.

[ballsniff13]

you sound like a stoner

[CCDProductions]

i know.

[UEGKashimi]

This is quite ghetto...I LIKE IT!!

[CCDProductions]

hahahaha lol

[superant10000]

am i right when i say this?

There's no clutch, so it constantly runs. so u have to turn off engine to even consider braking? so if ur about to hit someone/something u won't have enough time to brake?

[CCDProductions]

no i have a super shock that maks me jump over them

[sonicjoydivisonswans]

Awesome!

[nickdemo123]

lmfao

[sonicjoydivisonswans]

Okay today you guys... I'm going to show you how roll a blunt.

[CCDProductions]

im still waiting to see the vid

[Jem9339]

r u a stoner??

[CCDProductions]

only on tuesdays

[SRV32566]

i love the kick start, GREAT IDEA

[CCDProductions]

gracias

[theleakytaps]

what type of engine was it, im considering making one bit making it chain drive woud a push mower engine have enough power???

[CCDProductions]

do not use a push mower engine. they need the blades to keep the motor running cause the flywheel is too light to carry on the momentum of the crankshaft. weed eater motors are better cause they are lightweight.

[saab16guy]

@CCDProductions 

[cycloneCJproducts]

ahh 2 things, 1,engine will run cooler with the shroud on, and 2, where's the clutch? So while it's running as soon as you jump on it it's gonna stall OR the shaft is gonna chew up your tire!!! Oh and why is the gas tank side ways???

[CCDProductions]

1 the engine stayed cool enough when the wind was blowing on it.2 you start it by pedaling and you start going. 3 this motor doesn't nearly have the power to chew up this tire. its sideways cause i like to live life dangerously. hahaha

[CCDProductions]

yeah 9000 views. cody better hurry up and make a hit video if he wants to beat me. hahaha!

[sonicjoydivisonswans]

Good Job

[lordmcted]

odds are the fps of the camera and the rpm of the wheel lined up to make it look like it was running backwards, look at the wheels of passing cars next time you're out on the road, you might catch a glimpse of the same effect.

[aerogzim]

haha...your wheel is turnin the wrong way!

[0o0oyeah]

i saw that too , ha

[CCDProductions]

what r u talking about. i rode it that day forwards. how can the wheel be turning backwards?

[yaiknowscrewme]

upgrade the engine bracket so the end of the shaft has some support..Otherwise ya gonna screw the crank bearings

[CCDProductions]

i upgraded it. i'm going to make another video as soon as i get a new carb. but this time i'm going to show how to put it onto a 16inch bicycle. step by step.

[yaiknowscrewme]

very nice man..u know whats up.Nice job and great vids

[CCDProductions]

thanks!

[DannysCam]

does it have a clutch?

[CCDProductions]

no it doesn't

[vivarednex]

i like you motor

[CCDProductions]

i lost the mixture screw so no more fun.