1979 Monte Carlo incar video...Jerico 4 speed wheelstand

[Hemihart]

What suspension work do you have done you've car? I am having a little trouble with traction. I'm running 9x28 Hoosier slicks. Do you have an aluminum flywheel? It rather sounds like it. I have a Richmond 5-speed, just in the 11's however not as fast. Any pointers would be great. I have 90/10 fronts and 50/50 rears, I also have tubular lowers and adjustable uppers. Soon to be a drag race anti-roll bar as well. I need new upper bushings, what would you suggest?

[IRONSEAN7]

its funny seein the stock column with the shifter in park,, while this car is haulin ass

[no409]

sweet run

[goodrumbros]

who said a 408 cant rev,awsome dude

[bluemooncomplex]

You'd run a lot faster if you would fix your instant center

[Flandersfinest]

what you got for internals? fully forged? what cam? sorry i got a 79 monte too and i just started building a 406 for it.

[darkfiregt]

Meh... My Mustang can do that. I just don't like to show off. :P  Just kidding. This vid is still fun to watch a year later.

[Hemihart]

I know you are a G-body and all...but how are you getting such good traction? I have a 4-speed in my 1965 Chevelle and I need traction with a 9" tire. Please Help! I have about 640hp with a big block and I will have slicks

[hotrods1083]

what kind of front shocks/springs? some adjustable front drag shocks go a long way. pair them with some trick springs and a true slick, it should hook pretty good once set up right. the g body suspension is pretty much identical to your car, so you should be able to achieve similiar results.

[Hemihart]

I have big block springs but I don't know the rate. I was planning on getting 90/10 shocks for the front soon...the slicks made a world of difference. It hooks pretty good now but I still need to work with it a little bit. Check my videos out and see what else you think I could do. It pulls the wheels now :)

[mcpodunk]

good running car by the way

[mcpodunk]

nothing better than looking at the stars for a good 100ft I have a s10 that does it everytime most of the time on the street also

[TunedPort335]

Damn that car sounds crisp

[DaBlueOvalBoys]

What clutch do you run ????

[4speed71]

A RAM Single disk sintered iron setup. Very cheap and easy to use. RAM pressure plate is adjustable with a 800 pound base pressure. Normally run 900-1000 pounds of pressure.

[4speed71]

Yes....gas pedal never leaves the floor, light tap on the clutch pedal on each shift.

[cuervosmsn]

are you power shifting?

[disturbedproject]

um the only thing that comes to mind is holy fucken shit! lol would never catch me doin that