Aromaz 022 - Ancient Energy with HV and what else can I say.MP4

[morpher44]

I've made a similar observation about your "more energy" statement.

Last night I had ONE CFL. AC Volt meter showed output of coil was 333 VAC.

I added a 2nd CFL in series.

Voltage measured 470 VAC upward to 500.

Hence, the voltage INCREASED ... which is an odd thing to occur since normal transformers work with fixed ratio such as 10:1.

So I think the CFLs actually alter the inductance in the equation ... making the transformer ratio change.

[bill99959]

Want to see something funny!? Keep Watching,,,this guy fooling with high voltage, bear feet, concrete floor and metal table, and to top it all off,,,using both hands!!!!,,,,about the only thing missing is a bucket of water on the floor! LOL

[Aromaz2012]

How foolish can one be when he does not see nor know all the facts. The table is from wood. The floor - in fact the whole room is of 2" insulated ply wood, 6 meters above ground level. See, here in Thailand wood is cheaper than concrete. Oh, yea - there are in fact also two buckets of water on the floor - well, in fact two big 100x100x30cm plastic holders filled with brine as capacitors.

[juniortore]

Give him some time, stop complaining. Hes on to something.He is smart he will figure something out.

[Aromaz2012]

Thank you for the compliments! I wish I was really smart, then I would not have so many questions. No help in asking cause there are just so many things not-normal.

[TommeyLeeReed]

This is a joke, Tesla did this in the 1900's.

[Aromaz2012]

Certainly, Tesla used 65 Mega Volt, I am using 24 Volt, Tesla used ????, I use transistors.

If only we knew exactly how and what he did, the world will be seriously different today; and would not need to concern about water gravity.

BTW Ever looked up the work of Ismaeel al-Jazari? He invented a BIG range of water-gravity-machines! That is before 1180! Or even further back to the Persians?

[TommeyLeeReed]

First you said it was 48 volts, but ok 24 volts. If you are using 24v at 1 amp his is 24 watts, those lights are 18 watts. also when you ground the wire to the light you will pull more amps on the coil.

[TommeyLeeReed]

Tesla use no wires, this is not new technology. Your trick is called switching 3055 transister off/on, you use two many 3055, because of no heat sink.

[Aromaz2012]

Keep on going, you will get there - eventualy. No wire, but grounded earth - always with Tesla systems.

And yes, I did use heat sink - and no it is not needed because transistors does not get hot. Heat sinks are only for HOT items to cool down.

[TommeyLeeReed]

If you have 8 transister doing work, then your pulling heat. If not then one would do the same work. Your not being up front, are you?

One 3055 will work with out heat sink under 1 amp, yet you have 10 of them?

Please explain this to everyone, and why you did not add a diode to the coil.

[boxa888]

some people.. am i one of them lol also you should give tesla some credit please!!! please!

[boxa888]

5:00, very good show of teslas capacitance effect, metal plates do the same thing!! i show this in the videos of teslas one wire transmission if you want to look.very very good, man now i really have some competition!! lol . dam i wish i had more money!! ahhh it hurts my soul!

[FORCETHETRUTH]

absolutely fanstasic Aromaz! Thanks for sharing, I am right beside you and share the same results, along with a few others! Thanks!

[Drevtoobe]

Hi Corrie, the reason that you get sparks on the battery terminals is because you connected one end of the fluorescent tube to earth ground. This effectively connects the high voltage output of the coil to ground. By doing this, the coil is putting the whole setup on your table at a high voltage AC potential relative to earth ground.

[Aromaz2012]

You are indeed correct. I am on the first floor of building. Lab floor is 45mm (nearly 2") multilayer plywood. The earth is connected to the steel frame, but that is 45mm under plywood. Plywood is natural insulator? Presently it is very dry in Thailand, humididty under 40%. Nearest conductors is lights in roof. I tested the possibility of charge on building on Monday. None unless connected in series with something in circuit. Found similar results on farm Wednesday.

[Drevtoobe]

The setup is kind of like a topsy-turvy world. Instead of the setup being at neutral potential except for the HV output from the coil, the HV output from the coil is more or less at neutral potential and everything else is at HV potential. That's why the CFL lights up without being directly connected to the coil. Every single wire and component sitting on the table is at a high voltage potential relative to earth ground.

[Aromaz2012]

I do agree, that is why I get completley wireless - in relation to every object on table. Now I am going back and rework everything to see how far I can get into details, understanding and harvesting the energy.

[Aromaz2012]

My next step is to actually start using my own earth - all will be to the aluminum plate you can see on last video's - and faraday cages for insulation. Though I will only share these video's privately with valuable critics. Thank you for your comments.

PS. Who, What, Where are you in real life?

[Drevtoobe]

Hi Corrie, I used to work as an electrical engineer designing computer boards but that was a long time ago. I am not an expert in this stuff and I am pretty 'rusty' because it has been a long time.

Let me tell you why your analog meter shows zero current when in fact there is current flowing. The meter has it's limitations, it cannot measure high frequency pulsing current properly. The needle movement acts as a 'low pass filter' and cannot respond to stimulus above a certain frequency.

[Drevtoobe]

Permit me to explain to you why the fluorescent tubes and CFLs light up with only one wire connected. You made reference to this a few times stating that there was no circuit. The key thing here is that you are dealing with high frequency, high voltage AC electricity. Capacitors conduct AC current and block DC current. Between the fluorescent tube and the table there is a measurable capacitance simply based on the geometry. This 'stray capacitance' completes the circuit and energy flows.

[TommeyLeeReed]

I agree.

[Shanjaq]

These electric effects are taking on a unique character :)

remember folks, one hand in the pocket!

[crob227]

you plan on trasnfering power with this setup?

great job 5STARS

[Aromaz2012]

crob, I have not seen your work - yet. I am running on a bot of a schedule here; still got a factory to operate too. Wireless? Yes - see #023

[crob227]

spark gap made a big difference?

have you seen my work?

[Aromaz2012]

am not into getting as many possible people - that will bring too many questions and silly requests. I just need to make it easy for my forum members to find and other serious researchers to follow. That is all.