@sneaky98gt this was @ nj's raceway park! i could care less what you believe i just love the look of the 4 valve guys when a stock auto gt just kept up with them :^)
Very nice trap speed for only bolt ons and 100 shot. I run the 92-93mph and run 7.5-7.6's in the 1/8 in my c5Z with a 1.7 short time. I am guessing that sixty foot is in the 1.5-low1.6 range.
Driver mods are gay, learn how to drive the car. If some one asks you what ur best time was and you say 12.9 or whatever, no I want to know what your best time is, not with someone else driving your car. pussy
What does it mean then?? I always thought that was what it ment. Because some dude told me he had a driver mod for his stang and I said what someone else drives it? He said yea...so I said fagggottttttt
i just ran a 13.39 in my gt this past weekend. just bolt ons like cai, tb, x pipe w/ bullet mufflers, no headers factory crap :( and under drive pullies with a sct tune. didnt run slicks factory wheels and tires, no gears. trap was 102.33 and then fried my posi lol
thats a good pass... and its very possible for him to run that with the stated mods... i ran 12.0@113 with a 1.72 60' "horrible" with a 100 shot pulleys exhaust and gears... my car would have went 11s with some better tires.. broke the 31 spline rear end this past weekend though.. and my car with a exhaust, pulleys and a k&n air filter went 13.3@101 on motor....
I got a buddy that had a 99 gt back in 02-03 we hit the track alot, his car was bone stock except flowmasters dumped,& et drags. He ran 13.60's @ 99 mph now then how many of you guys have witnessed a mid thirteen second stock gt? I believe it is possible
very possible but not too many people can do it. When my Mustang dynoed 228rwhp I ran a 13.34 @ 104. That was done with a built rear, 4.10's, slicks, skinnies, shocks, struts and springs. Only HP mods then was welded in flows, h-pipe and a k&n filter. The guy in the video definately knows how to drive and that is a huge part in drag racing.
I went 13.71@100.3 in my girlfriends 01 GT with a K&N drop in filter and took the air silencer out, other than that all stock and I did that with dunlop winter sport tires with a 2.10 60'. That pass I did a 8.83@80.7 in the 1/8 mile and 4 weeks earlier I did a 8.83@79.3 at a local 1/8 mile track as well
not bad. thats some pretty good driving. i have just a little more done than you, and i run 7.68 1/8. i will be glad to get some skinnies and shocks/struts to see what ind of times i can pull off.
Also with your few mods you didnt make anywhere near 600ft/lbs. sounds like your "dyno" inflated your numbers for you. Makes you look like an even bigger tool when you run 8's.
And NEWS FLASH.....you can put a 99-01 Cobra bumper on ANY new edge from V6 to Mach1. Amazing isnt it? also, 99/01 Cobras werent supercharged.
i have a 00 gt with 4.10's x pipe flowmasters/turndowns intake sct engine management, its been dyno tuned 600 ft'lb clutch lightweight flywheel and 150 shot of nitrous... and it wont go 7. 20 you got more than longtubes and gears buddy, alot more. in fact my car is silver just like yours, cowl hood and all.. that gt also has a cobra front bumber on it. but i didn't hear it whining. anyways.. you need to quit bullshittin. longtubes and gears my ass.
My 2002 with 4.10's, offroad h-pipe, 27x10.5 et streets, and an NX 100 shot untuned went 11.95@113 in the 1/4 and 7.60@90 in the 1/8th. Considering this guys car has longtubes and a tune, possibly some tubular stuff up front its highly feasible.
very good driver. cant get any better than that.
5spd5thgen 3 months ago
is it normal for a stock automatic gt to trap 102 mph down the quarter mile??????? someone reply cause i trapped that O.o
mrdragking13 10 months ago
@mrdragking13 not if its pre 2005 lol. unless you had like a 40 mph tailwind
onebadg8 6 months ago
@onebadg8 well my bone stock 2000 auto gt ran a 13.9 @ 102 @ raceway park. I was amazed at my results!
mrdragking13 6 months ago
@mrdragking13
Not unless you had a LOT of weight reduction. Or the track was downhill...
sneaky98gt 4 months ago
@sneaky98gt this was @ nj's raceway park! i could care less what you believe i just love the look of the 4 valve guys when a stock auto gt just kept up with them :^)
mrdragking13 4 months ago
100 shot of gas? hahaha read the title when the vid starts lol haha
FordGTmustang2000 11 months ago
GREAT LOOKING MUSTANG.
215Dominator 1 year ago
sweet run.12.7s on full bolt ons and cams
slow2v04 1 year ago
"i don't even can go dit what yer sage she gotta five min call.. by misses two cars" ... say what??
customcaddys 1 year ago
That is so awesome. love it.
justandgaby 1 year ago
is it stock and the only thing your running is 100 shot of nos right? cause i have an 02 gt stang ...
lefty6758 1 year ago
Very nice trap speed for only bolt ons and 100 shot. I run the 92-93mph and run 7.5-7.6's in the 1/8 in my c5Z with a 1.7 short time. I am guessing that sixty foot is in the 1.5-low1.6 range.
Thanks for the video!
mawk27 1 year ago
nice 60! that thing leaves hard
jp229 2 years ago
Sweet times. Just watched another video of a big block blown camaro running 7.20's.
gitrmustang 2 years ago
What rpm's are you launching at?
gitrmustang 2 years ago
What kinda suspension?
StriderTacticaL 2 years ago
Driver mods are gay, learn how to drive the car. If some one asks you what ur best time was and you say 12.9 or whatever, no I want to know what your best time is, not with someone else driving your car. pussy
shauncx1477 2 years ago
"Driver mod" does not mean someone else driving your car...
StriderTacticaL 2 years ago
What does it mean then?? I always thought that was what it ment. Because some dude told me he had a driver mod for his stang and I said what someone else drives it? He said yea...so I said fagggottttttt
shauncx1477 2 years ago
lol well it's just a slang term that means knowing how to drive your car to it's full potential
StriderTacticaL 2 years ago
Ohhh I got ya. My bad then
shauncx1477 2 years ago
i just ran a 13.39 in my gt this past weekend. just bolt ons like cai, tb, x pipe w/ bullet mufflers, no headers factory crap :( and under drive pullies with a sct tune. didnt run slicks factory wheels and tires, no gears. trap was 102.33 and then fried my posi lol
bman20000 2 years ago
Awesome shifting!!
J1Z06 2 years ago
thats a good pass... and its very possible for him to run that with the stated mods... i ran 12.0@113 with a 1.72 60' "horrible" with a 100 shot pulleys exhaust and gears... my car would have went 11s with some better tires.. broke the 31 spline rear end this past weekend though.. and my car with a exhaust, pulleys and a k&n air filter went 13.3@101 on motor....
mystang1019 3 years ago
Bad ASS stang bro your at Kennedale right?
Bosfootball 3 years ago
Driver mod
I got a buddy that had a 99 gt back in 02-03 we hit the track alot, his car was bone stock except flowmasters dumped,& et drags. He ran 13.60's @ 99 mph now then how many of you guys have witnessed a mid thirteen second stock gt? I believe it is possible
LEOSPANTHER 3 years ago
very possible but not too many people can do it. When my Mustang dynoed 228rwhp I ran a 13.34 @ 104. That was done with a built rear, 4.10's, slicks, skinnies, shocks, struts and springs. Only HP mods then was welded in flows, h-pipe and a k&n filter. The guy in the video definately knows how to drive and that is a huge part in drag racing.
01gt46 3 years ago
I went 13.71@100.3 in my girlfriends 01 GT with a K&N drop in filter and took the air silencer out, other than that all stock and I did that with dunlop winter sport tires with a 2.10 60'. That pass I did a 8.83@80.7 in the 1/8 mile and 4 weeks earlier I did a 8.83@79.3 at a local 1/8 mile track as well
ttopgt 3 years ago
not bad. thats some pretty good driving. i have just a little more done than you, and i run 7.68 1/8. i will be glad to get some skinnies and shocks/struts to see what ind of times i can pull off.
s2ks 3 years ago
Also with your few mods you didnt make anywhere near 600ft/lbs. sounds like your "dyno" inflated your numbers for you. Makes you look like an even bigger tool when you run 8's.
And NEWS FLASH.....you can put a 99-01 Cobra bumper on ANY new edge from V6 to Mach1. Amazing isnt it? also, 99/01 Cobras werent supercharged.
nx89fox 3 years ago
i have a 00 gt with 4.10's x pipe flowmasters/turndowns intake sct engine management, its been dyno tuned 600 ft'lb clutch lightweight flywheel and 150 shot of nitrous... and it wont go 7. 20 you got more than longtubes and gears buddy, alot more. in fact my car is silver just like yours, cowl hood and all.. that gt also has a cobra front bumber on it. but i didn't hear it whining. anyways.. you need to quit bullshittin. longtubes and gears my ass.
01slvrbllt 3 years ago
Then you need to learn how to drive.
My 2002 with 4.10's, offroad h-pipe, 27x10.5 et streets, and an NX 100 shot untuned went 11.95@113 in the 1/4 and 7.60@90 in the 1/8th. Considering this guys car has longtubes and a tune, possibly some tubular stuff up front its highly feasible.
nx89fox 3 years ago
My good friend has an 02 and he went 13.2 at 108 i think with 100 shot. 3.73 and bolt ons
matthewmc2003 3 years ago
Can you go through the 1/4 traps in 4th gear with the spray?
ezridn50 3 years ago
28" tall rear tires?
ezridn50 3 years ago
No 26s.
tamestang 3 years ago
It's not my car but that should be good for 11.3- 11.5.
tamestang 3 years ago
time 1/4 mile ??????
kemadrenoagarra 3 years ago
What was the 60 ft on that run?
contentsunderpressur 4 years ago