Hows the ptv with that high of duration and lift? Im looking for a cam just dont wanna have to fly cut the pistons. Also hows the driveablity with it, i like to drive my car as much as possible so driveablity is a must lol.
Love those EPS cams!! Car sounds just like what I'm looking for. Exactly what mufflers do you have? You said 16" bullets, but what brand? Thanks in advance!!
@camaroguy99 The clutch someone else did, I did all the engine work. The pushrods are 7.325 chrome moly, because the heads are 59cc with a .040 gasket. I port matched the intake but with a fast 102 this combo would no doubt break 460 rwhp, even with my home ported 241's. They do also have a valve job but they have stock valves. Very budget.
The heads have pac 1518 springs, it would even be ok with comp 918's. The eps lobes don't need duals they are such a smooth lobe. I do have the stock trans and rear, I have a spec 3 clutch. Drivability is fine when you get moving, below 1500 it can lug around a bit, but it's definitely livable and worth the power. Of course, your tuner might be better than mine too..
I ported the 241's myself and port matched the intake to them, and then the cam and exhaust are the only other mods. Still running a basic SLP lid etc.
Car made 450 rwhp and 423 rwtq.. not bad for a budget build. These EPS cams are the best lobes out for LS cars bar none.
what lsa is this cam??
TransAm5667 2 weeks ago
Hows the ptv with that high of duration and lift? Im looking for a cam just dont wanna have to fly cut the pistons. Also hows the driveablity with it, i like to drive my car as much as possible so driveablity is a must lol.
craZy28ls1 1 year ago
Love those EPS cams!! Car sounds just like what I'm looking for. Exactly what mufflers do you have? You said 16" bullets, but what brand? Thanks in advance!!
80SorNUTHIN 1 year ago
@80SorNUTHIN Just the cheapo summit bullets. The car is very loud though, the video doesn't quite show how loud it is.
KngZ28 1 year ago
@camaroguy99 The clutch someone else did, I did all the engine work. The pushrods are 7.325 chrome moly, because the heads are 59cc with a .040 gasket. I port matched the intake but with a fast 102 this combo would no doubt break 460 rwhp, even with my home ported 241's. They do also have a valve job but they have stock valves. Very budget.
KngZ28 1 year ago
The heads have pac 1518 springs, it would even be ok with comp 918's. The eps lobes don't need duals they are such a smooth lobe. I do have the stock trans and rear, I have a spec 3 clutch. Drivability is fine when you get moving, below 1500 it can lug around a bit, but it's definitely livable and worth the power. Of course, your tuner might be better than mine too..
KngZ28 1 year ago
I ported the 241's myself and port matched the intake to them, and then the cam and exhaust are the only other mods. Still running a basic SLP lid etc.
Car made 450 rwhp and 423 rwtq.. not bad for a budget build. These EPS cams are the best lobes out for LS cars bar none.
KngZ28 1 year ago
any #'s?
musclecarkid18 1 year ago