FRPP Hot Rod Cams

[eouellette18]

what is the exhaust setup? this is how I want it to sound if I do cams. I know it says it in the description, but i need specifics, not to sound demanding or anything. lol

[stangredemption]

Would be nice to hear the cams as the description shows but good vid

[TheJimgonzalez]

All I can say is Fucking Bad Ass. Nice work.

[ILIKETURTLES69ify]

Are those Shelby CS69 Wheels in Gloss Black or Hyper Black?

[tallplayer43]

Results of Dyno?

[ghslax619]

sounds bad ass ! but those look like 10inch pipes lol still nice and clean\

[LJ23DW03]

How much did it cost for someone to install the cams?

[ROBBY639]

how much does it cost to buy the cams and have them installed?...do you ever have people always try to make you race you?....do u get alot of looks in shopping centers and stuff?....any problems mechanical wise?....and how is the gas milage....sorry asking so many questions, i just want to know what im getting into

[crazzybosnian]

do the cams burn a little more gas?

[USFCARTWRIGHT]

hey man nice car. but mind if i ask what the 285s in the rear did to the ride? also, do they slip at all in first? thanks

[powermaxx]

you need to hang your arm outside the door it looks cooler

[randumbuller]

put your arm down fag.

[tazaxx21]

Just wondering if you had the stock manifolds with the pro-chamber when you made the video??



[legenedary]

! I'm a Mustang Guy , And i'm Proud

[s197stangdragger]

I heard that you lose a lot of your low end torque when you install these cams. did you seem to notice anything like that with your car? I ask because mine is the same as yours, 07 gt 5-speed and I want cams...

[stangman2006]

@s197stangdragger you dont have to worry about losing low end torque with the frpp hot rod cams since you are able to use the variable cam timing with no need for cam lockouts like a lot of the aftermarket cams. your not going to get as much hp in the top end but the just cruising around town will be much more pleasant. plus you still get that kick ass lopey sound, im getting some for mine for sure!

[2fast4u324]

ahh the unmistakable sound of a GT Mustang.... :)

[wonderbreadkw]

you must have asians in ur neighborhood o.o my neighbors would love to hear it every morning. my v6 is somewhat loud but its a v6.

[RiceBurnt6]

Sounds AMAZING!!

[assault6622]

those are some blue fucking handicap stripes

[RiceBurnt6]

Sounds and Looks BADASS!!!

[hitechtonicleader]

this just sounds so badass. i think it's a perfet balance between the sound of a classic muscle car and a more modern meaner sport car

[stangcrazygirl]

What HP gain with these cams?

[87Jaws]

yo thats loud for stock mufflers u need to throw on some SLP loudmouths. that would be loud as fuck!

[281musclestang]

haha, don't get me wrong i love an obnoxiously loud mustang, but i had pypes violators on it w/ this set up and it was a little ridiculous! got a lot of dirty looks in the neighborhood. LMs are even worse

[MarineUSA93]

Dirty looks? They are jealous!

[87Jaws]

@281musclestang what lms'

[GoGoggansGo]

@281musclestang fuck the neighborhood

[gdahl2]

Thanks to you and your video I just got my Hot Rod cams and 4.10's last week and my BlowByRacing tune today. Thanks again

[hinckle]

I have same car, I'm lookin for wheels and I love yours, where did you get them???

[eddieNothing]

hey im bout to do the same sorta to mine i have stage 2 roush suspension cold and sct xcal2 program the guy who did it was pretty damn good at it im going to get Frpp cnc ported heads with Hot rod cams frpp 3.73 or 4.10 gears steed 1 piece aluminum drive shaft bmr k members which i recomend to you they are better and cheaper than steedas jba long tube headers blah blah Cheery on top of the cake kenne bell Mammoth supercharger. my ungodly long question is how do you like the gears and cams

[281musclestang]

@eddieNothing haha, the cams and gears are awsome. No regrets whatsoever. I drive the car everyday and have driven it across country more than once w/ no problems at all. It's also a lot of fun on the drag strip!

[281musclestang]

@hinckle I got the rims from jegs. They're great to deal with

[gdahl2]

Are Hot Rod cams considered stage 2 ?

[gdahl2]

I am about 2 day's away from ordering my Hot Rod Cams and 4.10's because of your video. I think I will get the CMDP too.

I can't wait to here what my 08 Bullitt will sound like!

The 4.10's will make a big difference too

[dalemllns]

can you give me a walk around?... Im thinking of buying the black CS69's for my bullitt and couldnt really get a good look at how they fit your car out back...thanks!

[Musclecarfever13]

Borla Stingers sound awesome on these stangs... esp in person..

[gdahl2]

WOW what you did to your Stang is the same thing that I am going to do with my Bullitt.

Right now I am at 295 RWHP and 320 RWTQ . I want to get to 325 RWHP and 350 RWTQ

[elnrownr]

@gdahl2 you will have a hard time gettin your torque to 350, iv got heads cams and almost all supporting mods and i made 381 rwhp and 342 rwtq

[Way2Digital]

Are you running your violators on this video?

[281musclestang]

Didn't really loose any drivability with the cams/gears and supporting mods. The car has the stock mufflers on in this video. The violators sounded like garbage with the O/R prochamber

[Faspony]

Your exhaust sounds nice for being stock mufflers. Very nice car, I have an 06 GT.

Just how many RPMs did you lose at say 70 MPH with the 4.10 gears?

[nls8520]

Any way you can make a vid of the car parked at idle so we can hear the cam?, also so we can see the wheels better? Nice car, I have an 06 Mustang GT.

[281musclestang]

open port lower manifold = delete plates. No long tubes though.

[08gtstang]

sweet!!! just got mine back 2day :) u dont have long tubes?!?! or delete plates?