MAGNET-MOTOR (PMM-01c) Experimental

[29846932]

y el motor? Yo veo un rueda que gira 90º nada mas...

[TimpBizkit]

It's not possible to make a magnet motor because the repulsive magnets repel the object from both directions, so it's the equivalent of going over a speed bump i.e. no net increase in kinetic energy. the attracting magnet is like a dip in the road in terms of its pull

[MnKndsDoom]

In order for a Perpetual motion machine to exist (esp. one that generates more output energy), you will need to fly to GOD to get the machine. Perpetual motion is a zero-point state resulting in a net output of ZERO. Energy loss in any active system is inevitable. Maintenance of such a machine is inevitable.

[haxor777]

My understanding is, you need 3 stators. One at 0 degrees, one at 120 degrees and one at 240 degrees. The rotor needs only one spoke.

[mcorrade]

Ok what he's not showing is the gate..Yes gate. If you place the rotor arm right in the middle of the pathway between the 5 magnets and 2 magnets it will stay. Even though it's a very small gate, it's still there. I finished this test to the letter and it takes to many of these pathways to make it work because the more you put in the system the more they interferer with each other. I will put up a vid to show this once and for all...Soon I hope.I think it's takes a fine balancing act mag/shield

[SPAGHETTIMONSTER1]

i wanna see your vid, link plz.

[Avengadfly]

da hat man glück wenn man nicht in den USa oder Großbritanien ist... da wirste gleich in einen Dschungel verfrachtet oder nach Neuseeland geschickt wenn du sowas baust :-)

[svseu]

Looks like it would work with 3 or 4 of the outrunning magnets.

So why doesn't it? Counteracting inducted magnetism?

[ArnoldVeeman]

blêh, seen that too often...

[renderrob]

Are the shields on your magnets made of steel or mumetal?

[renderrob]

Why do you only show this much? You have the slots cut for a second gate, and have a holder for the second magnet. Why are you not showing all of it? You also only tap it in very small amounts. What happens if you tap it harder? What is the gate shield made out of?

[Soukup2955]

Hallo Dietmar mein Vater arbeitet schon seit 50 Jahren an diesen Motor und ich werde es vollenden.Man muss die physik beachten sonst läuft er nie,ich weiss wie man es umgehen kann.

[cronfarmer]

R u a retard? the idea is to keep it going

[PulseFuelNerd]

What is the point of this clip? No narration, and no obvious explanation from seeing a half cycle.

It appears to slow down after being accelerated. Is their a gate on the back side? My guess is YES.

Not enough is shown!

[Gormanmod]

While it's accelerating, it could be a generator for electrolysis.

[Rickarddenfursta]

That far is not so difficult,now the other part

[AustinSwill]

Ok, you have me fooled. Either there is somehing more to what is seen in the video or you have discovered perpetual motion, free energy, over unity free power or whatever you want to call it. My guess is that there is more to this or you would have had a magnet in the other side and had this thing spinning constantly, or for that matter had 2 more "gates"

[Rodgleztube]

Very good, just you need one or two sides more to run that thing.

[VetexMotor]

I think the rotor is not heavy enough to have enough momentum to do a whole revolution, also bearing friction is too high, the rotor cannot rotate more than one revolution by itself.

There is no magnetic v gate use in this demo.

[DivineK18]

fucking magnets , i waisted so much time just like dietmarhohl , i realy beleaved it .

[DivineK18]

it won t work if you use multiple magnets , i have test it myself ...

[DivineK18]

can i buy it ? how much ?

[neorules]

wonder why no updates? It seems to be a pattern with these devices.

[Manitobah]

Have you considered replacing the "Metal Thumb Screws with Plastic". Those screws would have a strong atraction to the magnets

giving you "Magnetic Drag"..

[Manitobah]

I think Dietmar is teasing all of us! The second magnet 3rd ... 12th magnet are easy to add. I don't think the field of the fist magnet would be an issue on the second, too far. We must try his experiments...

[DivineK18]

nice, wat happens if you put 1 magnet on the other side :P :) ? free energy ??

[rdhjr1]

Don't these people have anything better to do?

[Rodgleztube]

Like you see them?

[gabydewilde]

very pretty, it looks like it only needs a little bit of tuning. I would try make it more adjustable. Good luck.

[allesleiwand]

na wenn du nicht zum ars electronica gehörst...

[5mrd]

wo hast du Plexiglas Scheibe gekauft? ist die 1 cm dick?

[warforlips]

At first I thought that you might have gotten by the 'gate' problem (that keeps all magnet motor's from working). But, it appears as though the threshold is marked by your paintbrush. The holy grail for all magnet motor's is overcoming the 'gate'. Try some shielding.

[PMorphy65]

I think you are correct warforlips, everyone that gets this far has difficulties completing their project due to that gate. It's very illusive, because when they add to it, the gate prevents the complete cycle. As you have mentioned, the only possible way around it, is to use magnetic shields, but I haven't seen one the works.

[Skoda130]

Lead does..

[PMorphy65]

I understand that, it's just that I haven't seen a completed, functioning device.

[mutwa]

There is no gate on this motor.. The magnet is attracted in, and repulsed out. I see no reason why this guy shouldn't have it working by now. Probably does and is off to the patent office to learn that they don't issue patents for devices which violate the law of thermodynamics. I think whats happening here is that the metal plates he's using allows the magnet to transition between the two opposing forces, thus eliminating the gate. Hats off to this guy for showing us a way.

[warforlips]

Sadly, Lead is an RF gate, not a flux gate. Simple steal 'gates' will 'bend' the fields of flux. Sadly, I think that the peasants such as ourselves are doomed to failure. The top minds from around the world have worked on this for almost the beginning of time. Diamagnetic materials have yet to make their way into these youtube experiements. //I'd like to see that!

[mutwa]

I've tried bismuth with no success, but that doesn't mean it couldn't work. I think perhaps with nano magnetic materials it will be easy, once we can get to the point of programing a material how to act and what characteristics it displays. Even our current magnets aren't innovative in shape. It only comes in basic shapes like squares or cylinders. We need to experiment with creating different shapes of magnets, and then try them in different configurations.

[AustinSwill]

This is not true, the patent office WILL issue patents for this. In fact it is quite easily found on the website, You may be required to produce a working model.

[hoekf]

Schoen ! funktioniert das wie ein SMOT?

[neorules]

Whats on the red part? Why don't you add more to make it continue?

[V123456789U]

That tells you the poles of the magnets neorules.

Red: South

Blue: North

[ShaderZ]

amazing 0_0

[raulitech]

Please share technical details with us and keep us updated!

[jahroen]

that looks real good!

do you have info on how you made it