so i had a problem with the buttons. they just wont work anymore nothing happent when i touched them. my solution was freaking simple. just unplug everything also the power cable. and then let it run on his battery and pull out the battery. it worked for me, like the hardware reseted. hope it also helps for you guys
I have an HDX, and I discovered that my MediaSmart panel problems where related to pent up static.
Any chance you could provide us with a hotlink to the PDF of this Maintenance and Service manual, mausolfb? I can't seem to find it anywhere on the net.
Shield the ribbon cable with high temp thin foil tape and increase the surface area of the existing foil ground pad that it rests on. I also secured the ribbon cable to the ground pad with strips of foil tape. I covered the metal sides of the LIF connector with Kapton tape to insulate it. Next, I covered the kapton with foil to shield and ground it. You dont want to cause anything to short out on the foil tape that is being added. Avoid adding foil to areas near the exposed motherboard.
I've had nothing but trouble with HP! First I had a DV9074, when that one had nothing but trouble I got buyback and they sent me an HDX16 - and even that one's having trouble now LOL! QL-buttons living their own life and there is no sound whatsoever. One shouldn't think it's possible but it is...
been having this issue for ever..hp tech have no clue they keep telling me to reboot to factory..which ive done 4 times..hp is terrible worst product ,, i have ruled them out and will never by any product from them.
hey, i have hdx 16 1370us and i don't have any problems with quck touch (is quick touch not quick launch. quick launch is when use fn button).
only problem i have with quick touch is when i use the windows 7 and windows 7 driver (now i use windows 7 and windows vista driver and i don't have problems)
trying to unlock keyboard it auto locked on me. dont know how to unlock. HELP!!!
dragondaddy1986 1 month ago
this helped me 100% thank u so much!
meercenary 2 months ago
What does a new quick launch board cost? Did they evevn fix the problema with the board? Becuase my opinion is, it will just happen again.
propertybylisa 3 months ago
I would just like to say that I'm thoroughly pissed off at HP and will never buy one ever again.
roses31792 4 months ago
What part do you need to get in order to fix this? How would I look for it on ebay?
janczak4good 7 months ago
what happens if some of the letter key go hey wire like i would press the f key and it would open a window just a random window? any ideas help
tom00440 8 months ago
so i had a problem with the buttons. they just wont work anymore nothing happent when i touched them. my solution was freaking simple. just unplug everything also the power cable. and then let it run on his battery and pull out the battery. it worked for me, like the hardware reseted. hope it also helps for you guys
matthijsov 1 year ago
i have the same plroblem with my hp pavilion dv8 1220eg is there a way to just turn the buttons off ?
MrDanaris 1 year ago
HP SUCKS !! These Quick Launch Buttons drive me crazy !!
RajKamalKhare 1 year ago
@RajKamalKhare
Same problem - I was getting close to insanity...
Then lightning hit nearby and "killed' my new TV, Satellite Receiver, etc.
After rather expensive repairs, I got a few "SurgeGuards" (Model SZ-6t) - and suddenly the problem with the "Flea Power" Keys is gone !
Plug power-cable direct in socket and eventually the "Fleas" ( taken from HP Customer Care posting ) come back to live and do their dance
I am not a salesguy of these things - but it works...
Vize99 1 year ago
Thank you very much!! you solve my problem; it is very useful that the people like you colaborate with theirs knowledge.
mrivarola 1 year ago
Hello, nice video and nice info.
But my problem is the next...
I unpluged the cable, how do i activate the wifi hardware?..
any solution?
How do, I fix it?
elrober14 1 year ago
Hi, probably I am missing something, but what did you perform to actually solve the problem. You removed the keyboard cover and did what?
I have the exact same problem...
Thanks
inthecity1972 2 years ago
should I get this laptop or the dv7 3065dx
bribabeX100 2 years ago
I have an HDX, and I discovered that my MediaSmart panel problems where related to pent up static.
Any chance you could provide us with a hotlink to the PDF of this Maintenance and Service manual, mausolfb? I can't seem to find it anywhere on the net.
stensin 2 years ago
I have the link for it posted now in the info pane of this video.
mausolfb 2 years ago
Thanks! You're the best!
stensin 2 years ago
Shield the ribbon cable with high temp thin foil tape and increase the surface area of the existing foil ground pad that it rests on. I also secured the ribbon cable to the ground pad with strips of foil tape. I covered the metal sides of the LIF connector with Kapton tape to insulate it. Next, I covered the kapton with foil to shield and ground it. You dont want to cause anything to short out on the foil tape that is being added. Avoid adding foil to areas near the exposed motherboard.
Brian220x 1 year ago
i have the HDX 16 1200 cto or somethin like that .
wireless on and off
done every update , driver, and program update..
even reinstalled my entire OS and still have the issue. god i hate my HDX
yankeefan11490 2 years ago
I've had nothing but trouble with HP! First I had a DV9074, when that one had nothing but trouble I got buyback and they sent me an HDX16 - and even that one's having trouble now LOL! QL-buttons living their own life and there is no sound whatsoever. One shouldn't think it's possible but it is...
migrapolis50 2 years ago
been having this issue for ever..hp tech have no clue they keep telling me to reboot to factory..which ive done 4 times..hp is terrible worst product ,, i have ruled them out and will never by any product from them.
muck99 2 years ago 2
I have the same problem with my hdx9300 it's ssssooo irritating :( Thanks for solving this :D
vietieboy 2 years ago
hey, i have hdx 16 1370us and i don't have any problems with quck touch (is quick touch not quick launch. quick launch is when use fn button).
only problem i have with quick touch is when i use the windows 7 and windows 7 driver (now i use windows 7 and windows vista driver and i don't have problems)
bogdan7alex 2 years ago
YAY!!!! First viewer and commenter!!!!!!
-ticomfreak :)
Ticomfreak 2 years ago