Added: 4 years ago
From: itg4mike
Views: 63,452
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (229)

Sign In or Sign Up now to post a comment!
  • Nice job! it looks perfectly clear!

  • i like the part where it takes for ever.

  • volcom!

  • is there a PSPgo case mod???

  • @KingVirmire yeah there are although i have no clue as to how hard that would be... although i'm always up to a challenge... :3

  • LOL You have the same x-mod screwdriver I have lol. I am just about to attempt this with a case I found at DealExtreme for (Get this) 13 bucks. so yea cross those fingers for me.

  • @GreaterWood be a little careful with that one, I bought one from there and it actually looked better than the one in the video but I ran into more problems... although its not something that you shouldn't be able to fix...

  • @itg4mike Yea, Some of the buttons stick, so I am going to just drop the ones that came with it, and revert to my old buttons which didn't stick. I had to replace part of the frame (going to do the rest) also because it was effing up my power switch (I wasn't able to turn on the PSP at all) but overall, its pretty cool looking.

  • @GreaterWood i replaced mine witha clear case, and now mine won't turn on either! what gives. the power won't come on. what do i do?!?!?!

  • @geoflaw275 I would try and replace the frames around the case, as sometimes the switch that comes with it, does not fit correctly.

  • i know a guy that sells full modded clear cased psp 1002 and 2002 with firmware on ebay

  • U suck putting a psp together I could have done it half the time it took u to

  • @MrCorben50 If you got nothing nice to say then don't even say anything. For your info it was the first time I took it apart and certain things weren't fitting correctly. Now if you got some problem with my video go find another one to troll on. -M!K3-

  • @itg4mike Don't worry about him he probably doesn't take his time and f***s up his psp during the shell changing. I assume he strips all his screws.

  • @MrCorben50

    "I heard this guy say to his friend, 'Man, I'm really good at checkers.' Which is the same as saying, 'Man, I'm not good at a lot of things.'"

  • I know where you can get this plateing for $20.29.............

  • this is quite easy but i can't find the right case and stuff who knows where i can buy it??

  • he sped it up and it looks hard

  • i can do this 50 bucks includes case message me for details

  • rip off.

  • average time it should take. for me it took me like. half an hour tops. hardest part bout psp slim one would be taking out the umd door.

  • how long did that take

  • O.o that looks hard

  • thats what she said

  • i'm sold.

    but is it possible to buy one of tese cases anywhere else other than the internet?

    like, gamestop Ect...

    just send me a message?

  • IT depends, Your typical major game outlets won't have it but I've seen it at my local play n trade

  • type in "(color) psp shell" into google... then search the shopping tab. I've found some for a lot cheaper than the one he found.

  • where can i buy a psp already made like that? cause making it looks hard. plz.

  • Trusat me its not haed buy a case on ebay for about 10 pounds and then all you have to do 1s undo 8 screws and take out the buttons and thats it

  • cool mod relaxing songs

  • i did this and my alalog now drifts my buttons dont work you have to press them really really hard and it doesnt read umds so basically its fucked

  • your analog stick drifts cuz its not properly in...

    U might have to press the buttons really hard because sometimes the buttons are shitty themselves... so u should stick to original buttons... And as for it not reading umd's anymore... you probably have the grinding problem where the gear grinds against the case... u might need to cut a tiny bit off the case

  • i fixed the analog by replacing the anolog thing with an old 1 i had i fised some of my buttons anfter i did that and i have a hacked psp so i dont use umds but if i ever want to sell it i wud get a better price if it could read them i have to close the case tight and hold it woth my fingers so it works but oncei i take my hand off it it stops reading

  • i cannot do tht for a toffy O_O

  • I got the whole thing for $15, each component from different sites. :D

  • thanks for the information i will apply that.

  • unfortunately, yes...

    The way the psp was built ended up stacking every piece on top of another... so it made it kinda difficult to put together....

    Although JUST MAKE SURE U REMEMBER WHAT SCREW GOES WHERE.... if u need help, im always here

  • im bought the same thing do you really have to take all of the psp apart getting worried

  • Cool mod, gay song

  • You inverted the video or you really change all the positions of buttons and arrows? Because arrows and joy is supposed to be on the left!

  • DAMN!

  • i got a custom made psp

  • i can never get the umd door off without breaking it lmao unless its with the custom psp clear case or w/e color heh but yeah

  • i dont know how to even take the thing apart let alone put it into the case, i need to know cause i got the faceplate off just fine, but now i need to know how to put the back cover on, if you can help or have a link to a site that can help it would be GREATLY appreciated!

  • i want to do this but it looks so hard

  • he just makes it look hard its quite simple if u just take your time

  • i want a clear or chorm case but dont want to risk braking my psp changing the cases

  • how much 2 fix mine?

  • crazy

  • Badass mod. I have 2 broken PSP's at my home I need to replace the monitors on. Figured my extra one I don't personally use I would mod for the hell of it. Any idea how much it would cost to get a set of psp screws along with a clear shell.

  • search the net and u could find a set of psp screws for around 5 bucks and at deals extreme u can find a clear case for about 20 bucks last time i checked?

  • wtf u want to destroy the guarantee void

  • u mean the warranty?... that's like a first gen psp... I got it the day it first came out and to this day it still hasn't died on me.

  • i like your hands they look hot... CAUSE THATS ALL I COULD SEEE

  • hi do u skate board

  • i got my case for 15 bucks on deals extreme hella yeah

  • dude im sorry, not a bad vid but your music is terrible! i literally turned off my speakers and enjoyed the vid soundless! i like the clear case though, might do it soon. good luck with future modding!

  • haha.. actually yenno what, i respect you for that cuz i've got other people ranting about the music and you're the only one that did exactly what i told them to do... lol

  • man i ordered one for my slim i thought it was going to be easy.........wrong!

  • actually when i opened a slim one time, it seems like it would be easier than a phat one...

  • dude this is awsome! =D id do case mods but not till i get a psp slim as back up xD that way i have the phat to mess around with and the slim to use un mod/hacked touched. just incase i uber fail my psp phat.

  • ok i changed my lcd screen but when i put it back together... my right arrow on my d-pad doesnt work... put when i take faceplate off and just hit the rubber part it works... wat did i do wrong

  • Im guessing your using a fat?

  • me or mike?

  • You.

  • o ya i got a phat

  • god every one of these vids have gay ass music

  • Hey yenno what else sounds gay?

    The fact that your ass found the video and has the guts to complain about the music when i bet you didn't have the balls to do this on ur own ok?

    If the music bothers u that much go make your own dam video about the same thing and add your own music

  • I second that. The case is cool.

  • ur right. i dont care about the music just what the person is doing in the video

  • yea you bastered what he said

  • yea you bastered what he said !

  • try a number 1 phillips

  • lmao you and your djmax songs xD

  • Nice psp...But easy to do...Anyway anyone can answer my question?Like why the number of views of your video in your profile does not tally with the number of views on the video itself?Like they can say there is a view of 100 but actually there is 0 or something like that?=) Pls help=D

  • Man they should really make some clear psps i bet they would sell like crazy.

  • Where did you buy the clear case from?

  • Never mind I read the description. Thanks

  • You're vid looks like is is mirrored becuse your PSP is all reversed!! Creappy

  • to put it on an shiping or u want more

  • if i give u my psp will u do it 4 me 45 buks or 56

  • can i take a psp phat faceplate and put it on my psp slim ?

  • no it won't work

  • What do you think?

  • i cant even get the scrws out to open the damn psp

    and yeahh

    i heard thhat some plasic part blocks one of the gears

    so

    u just have to

    cut it out

  • im doing that right now..=(..i need there a couple of screws i cant get to

  • is that plastic case strong enough

  • lol wow must of taken a shit load of time if it takes 9 min is fast motion :S

  • the first time u go through it, yeah its gonna take a shit load of time cuz you don't know what the hell is gonna break.. lol but after the first time, you get used to it

  • Why didn't you just unplug the UMD frive from the motherboard? It would have been a lot easier!! I take these PSPs and fix them and mod them at least 2-3 times a week.

  • wow, looks like an epic discomfort in teh rectal region! LOL

  • gay song, but otherwise its awsome.

  • YO

    WHYS EVERYTHING ON UR PSP FLIPPED AROUND BACKWARDS?

    like the anolog sticks on the right side, the batterys on the right, wtf?

  • It's because the camera was filming upside down when I was recording... So I just Mirrored the video

  • Ive done this to my mod. Never done any LEDs though. But it was SOOO fun!! before i almost stripped a screw. But after that it was so fun to see what was inside a psp!

  • i dont have allot of patience t do that

  • wow cool,but i dont have a psp

  • lmfao sucks for u

  • i have slim one...but im scared to MOD THE BACK..THE FRONT S EASY ONE. to change the case

  • same but i got da fat psp

  • same here 2 lol, i bought front and back but i dont want to brake my psp by any chance

  • but where do i get the clear case from a store like best buy?

  • What's the song in this video?

  • your own miracle

    from djmax portable 2

    i forgot the artist

  • Artist : Ruby Tuesday

  • i need to find someone to link battle, -_- i dont want to play 2000+ songs.

  • haha yeah... i've been there and haven't really linked battled..

    anyone playing dj max 2 on xlink kai?

  • i just finishing clear case mod and led fader! Put it together at first things were tight and buttons wouldn't work. So i took it apart and everything works fine. Just have to play with. It you do this mod and your umd drive is making funny noises. You should use a dremel or a tool to help file or sand down the section where the gears spin. It rubbing up on the psp clear case! good luck all!

  • well once i tried taking my psp apart 2 put a better skin but damm that was too hard so i just bough the stickers

  • i hate the slims the original felt better it felt like it was worth what u payed for and it looked better now the slim just feels like a toy that costs 200 bucks lol

  • the PSP system is supost to fit in the clear case you don't need to take apart the system adn rebuild it in the clear case

  • what? so there isent a full clear case for the psp slim?

  • no but you can do what this person did but you dont NEED to you can just send a request for sony to make you one that is clear and you wont have to wory if your psp doesnt work again

  • there is, google coolmods

  • This is not a case, it is a full body replacement.

  • right

  • but also read the discription R tard

  • of course u do thts wot i had to do when doing it... u hv to take the system apart nd rebuild it... its atached to the case...

  • Creo que se ha dejado la tapa del lector UMD sin poner, me equivoco?

  • Dude plzz helpp.

    My PSP on/off switch is stuck. It wont switch up to turn on, im having so much trouble and plus i cant send it back cuz my warranty is up. And i dont wanna break my psp sooo plz help.

  • luvin the volcom logo dude lol and yea u payed $56 OUCH i saw the clear case for like $16 on this other site!

  • well yeah at first... this other site was the only place to get it.. so yeah... remember guys... dealsextreme has it for 16 bucks and free shipping (that takes freaken 2 weeks.. but better than nothing =p)

  • your moms gay in bed..

  • whats the first song name calld plz message bc

  • first song is called your own miracle

  • Dude you could have kept it at normal speed so we can see what you're doing

  • honestly the video is sped up x3.. lol

  • tht music is so gay

  • yeah well no one said anything about this video being for the music...

  • Just a quick question:

    What music is that?

  • they're all from the psp game dj max portable 2

  • hey im about to do a clear case mod too, and i was wondering... should i keep the original buttons and joystick? or does the 3rd party buttons work just as well?

  • Use the original buttoms.

  • can u make the same video only in slow explaning cons and pros with each step

  • i want my friken psp back sh*t wan on the in the bathroom one day set it in the counter stood up and it fell in the tollit still worked butit NEVER updated skipped with every game it play and for some resone inter was oddly slow afer that :~(

  • The xmod screwdriver!!! Those things were the best little rc cars ever. If you've never owned an xmod youll never know what im talkin bout.

  • and a nice kit to work on ur psp with =P

  • Can you only mod the front part w/out takin the whole psp apart?

  • yeah... you could change your faceplate without changing the whole thing

  • very nice i have the same umd problem after changing the case ill try loosening the case because it work (with some bad noises) one i turned it on first time. but now it doesn't work at all.

  • no screen got cracked u bline dicks

  • did u crack ur screen in the making

  • i want to do this bad

  • lol the screen cracked at the VERY VERY END

  • uhmm.. no my screen didn't crack at the end...

  • i bet it took about a month to do this

  • more like 2 hours :P

  • nice takes me back to a simpler time with the clear gameboy colors

  • wow that is so gay how long did it take u to make that video 9 hours

  • WELL!

  • u forgot the umd door.

  • lol, its funny when people misplace chips of a psp

  • he just built a psp in 9 mins where it takes millasian sweatshop childer an hour. Thats a new personal best. Good for you.

  • dude he speed up the video

  • LOL

  • how much do i have to pay you for you to do that?

  • good one...

  • dude u got riped off i got my ful psp clear cace of ebay for 8 quid

  • i got mine for 16 usd :P

  • u den fuked up yo psp

  • ew that case makes it look so cheap and shitty

  • whats the song? its pro

  • They're DJ Max songs

    1st- you're own miracle

    2nd- Brandnew days

    3rd- Lost and Found

  • SICK

    LMFAO

    looks like a GBA case xD

  • i could clearly tell you were checking out instructions online during the process...could you by chance give me a link to your source?

  • cool

  • where did you get it it

  • i got it for an expensive price... but there are places that sell it for cheaper...

    check the details of this video...

  • lol this seems a bit extreme just for a whole new case. whats the use of modding the back of the psp if you are not even going to look at it while you are playing the psp.. i could understand the front but the back..?

  • Well it looks better as a whole. Sure you may not look at the back while playing with your psp but it would look awkward if the back was black and the front was clear. Iono it's just opinions

  • Ehehe... I feel silly. I finished reading the comments after I posted and I noticed you said you mirrored the video. Oh well ;)

  • ahah its kool... as to swap the memory stick doors, there's plastic tabs on the original door that prevent it from slipping off the rubber part. I just cut them off and the door slid off the rubber part

  • Ok first off, why is your psp partially mirrored? Is it for a lefty?

    Anywho, I too have done this case mod with the very same case from CoolMods and boy was it a doozy. ;) It was my first time ever going 100% and I spent 6 hours on it, but I had no issues.

    I'm curious to know what you did to swap out the memory stick doors.

    Anywho, while I don't have a video of my case mod job, I do have a psp video up where I show mine off.

    [I'm sure you can fill this in.]/watch?v=4zeq96VRiV0

  • itg4mike can u do thiz 4 ma psp plz

  • i just finished putting back my psp that was living hell! it took me a little over 3 hours to put it all back because stupidly i forgot where a couple pieces went lol i hope that i will never have to do that ever again ...it had to be done though i sat on my psp and broke the faceplate ...i saw a set on ebay for 20 bucks and bought it i got it in the mail and just went at it ...i wish luck to everyone wanting to do this it is hell to do but worth it in the end

  • I bough this exact same thing on ebay 2 day fo $18 i cant wait!!

  • does any1 know if jpop japanese anime in video games do this for psp cuz they do this with ps2

  • i meant to say and japanese import games in newberry park in california

  • you cant just take off the black and put on the clear?

    you have to take it all apart

  • looks like you could just take off the board and stuff in one whole go huh?... the thing is, everything's all separate so you gotta take each thing out =\

  • het man im desperate were did u get the backplate and the faceplate can u message me and tell me plz

  • online through dealsextreme for about $16