I recoment you do NOT try this... I was oppening a old toshiba one that didnt hold a charge. Yea.... 2 cells seriosly damages and becoming molten hot and a thirf taking damage
hi, i read the holy scrap blog a couple times a week. love what you folks are doing, and learning so much from your entries. i'm going to be repacking my laptop battery in the next few days. i should have known when i searched for a how-to vid on youtube, it would be one of yours. cheers, katie!
Hey, I have one question what happens if i buy sony batteries of 2600mAh each and use it, my doubt is if i use battries like that would i be able to use the laptop for like 6 hours with only one single charge?
Hey, I have one question what happens if i buy sony batteries of 2600mAh each and use it, my doubt is if i use battries like that would i be able to use the laptop for like 6 hours with only one single charge?
hey, do you know where i can find a battery formation schematic for the Dell XPS M1730? i lost my schematic and now do not know which battery goes where
hello.i got 3.7v 2800mah cell and replaced them , but the battery terminals do not give any output nor the led indicator works, i have cheaked the cells are charged and they give 11.4v in that setup but the battery circuit does not give any output.
please give me any of your chat id so that i can discuss with you. 8 months ago
hey i also did the same with my compaq laptop battery, i got 3.7v 2800mah cell and replaced them , but the battery terminals do not give any output nor the led indicator works, i have cheaked the cells are charged and they give 11.4v in that setup but the battery circuit does not give any output.
please give me any of your chat id so that i can discuss with you.
be patient opening the battery. Use a small flat head screw driver and slowly go around the case just opening it a little bit at a time. This can take several minutes to do well, and less than a minute to just destroy plastic.
Hmm, may I suggest if ANYONE is going to play with re-packing Li-Ion batt packs, they:
1) LEARN TO SOLDER PROPERLY. (Too much heat can turn a Li-Ion cell into a grenade) When soldering cells you need to do it fast & good. High blobs of solder means too little heat used. Solder not "flowing" means not clean or needs more flux.
2) Do not try & push the current from Li-Ion battery through self adhesive strips! You bought cells with SOLDER TABS on them.....USE THEM??!!
That was LCD Soundsystem with "Yeah (Crass Version)", probably the best artist and hardest tune on this planet. YEAH.
sklarm, thanks for the vid, but the quality of yt videos made for some blurry text. Could you overlay some yt annotations instead? Maybe also add some note annotations on what you're doing, too :) It was a little bit hard to follow when you suddenly added the side cells, didn't follow what went where. Thanks!
Sorry about the blurry text and lack of documentation of the process. I can post another video of a dell battery repack (which is pretty much the same thing). I have a very high quality version that i had trouble uploading to youtube.
Comment removed
gingerbread185 1 month ago
A single strap of tape around the main battery cluster holds them aligned as you put on the end conductors.
doceigen 2 months ago
no soldering o.o shit XD the soldering of my averatec battery ruïned my cells
christiaan12nl 2 months ago
For 30$ you can buy a brand new battery.
zwycee 6 months ago
where can i find the battery?? it looks odd w/o any thingy in + side and how can i change my 6 cell battery to a 9cell?
thx
dafikido 8 months ago
I recoment you do NOT try this... I was oppening a old toshiba one that didnt hold a charge. Yea.... 2 cells seriosly damages and becoming molten hot and a thirf taking damage
iToasterman 10 months ago
@iToasterman you shorted something out
Ltb0b 8 months ago
@Ltb0b i aint a idiot. >_> i know i shorted it it was a accident but this is a VERY bad idea. i had one i idndtr short start to heat up D:
iToasterman 8 months ago
@iToasterman This isn't a terrible idea if your careful please learn to use spell check
Ltb0b 8 months ago
@Ltb0b I know how to, and it is. Theres so many risks with this method! Mainly the tools being metal! There has to be a safer way
iToasterman 8 months ago
This has been flagged as spam show
KISS YOUR HAND 10 TIMES
SAY YOUR CRUSH 15 TIMES
POST TO 2 OTHER VIDEOS
LOOK AT YOUR HAND
bjornar1999 11 months ago
Jesus Christ the music is annoying. Why do people think they have to put music under their selfmade videos??? Stolen music, that is.
Hahnsaugerin 1 year ago
hi, i read the holy scrap blog a couple times a week. love what you folks are doing, and learning so much from your entries. i'm going to be repacking my laptop battery in the next few days. i should have known when i searched for a how-to vid on youtube, it would be one of yours. cheers, katie!
katiesalamina 1 year ago
Hey, I have one question what happens if i buy sony batteries of 2600mAh each and use it, my doubt is if i use battries like that would i be able to use the laptop for like 6 hours with only one single charge?
thanks
hadesmcz 1 year ago
Hey, I have one question what happens if i buy sony batteries of 2600mAh each and use it, my doubt is if i use battries like that would i be able to use the laptop for like 6 hours with only one single charge?
thanks
hadesmcz 1 year ago
Is this a Ibook G3 battery
Quekil830 1 year ago
hey, do you know where i can find a battery formation schematic for the Dell XPS M1730? i lost my schematic and now do not know which battery goes where
IgnoredComment 1 year ago
I would've prefered someone talking you through what's going on, or at the very least, music that didn't sound like 20 Nintendo's being slaughtered.
At any rate, I'm planning to do something similar soon, and I do appreciate that you made the video.
pepsiru1es92 1 year ago
why not just buy a new battery off eBay for $30
dsm1580 1 year ago
XD dangerous battery. BOOOOOM! 2 days latter
666Kvasir 1 year ago
@666Kvasir if you doesnt play you wont win :D
NamelessNLS 1 year ago
hello.i got 3.7v 2800mah cell and replaced them , but the battery terminals do not give any output nor the led indicator works, i have cheaked the cells are charged and they give 11.4v in that setup but the battery circuit does not give any output.
please give me any of your chat id so that i can discuss with you. 8 months ago
nanicome 1 year ago
Good music :)
helmenthor 1 year ago
god that music was annoying
MEEESTiRg 1 year ago
yeah yeah yeaH yeah yeah yeah
mRhUmAn99 1 year ago
ebay
edstar83 2 years ago
hey i also did the same with my compaq laptop battery, i got 3.7v 2800mah cell and replaced them , but the battery terminals do not give any output nor the led indicator works, i have cheaked the cells are charged and they give 11.4v in that setup but the battery circuit does not give any output.
please give me any of your chat id so that i can discuss with you.
rishirich27 2 years ago
Good work! so time consuming.
scramble45 2 years ago
10 minutes is time consuming?
kevbodian 2 years ago
well theres your problem, you have a mac..
SnipesWithWolves 2 years ago
@SnipesWithWolves
Lol.
bigman6441 2 years ago
Comment removed
SnipesWithWolves 2 years ago
nice music
magicmugs 2 years ago
where did you get the replacement cells?
churioz26 2 years ago 2
wow thank god for lithium batterys
strongmad86 2 years ago
What cells did you used? my ibook battery barely holds any charge and i`m considering doing this. great video.
csl02 2 years ago
ok thx for the tip- but it is so tight !
So you say there are no screws?
I mean, i tried what you said but it won't come loose, only plastic starts deforming - that's why I had to ask you... the plastic is so soft grrrr...
Thx I will try like what U said, hope it will work out
parlaeman 2 years ago
Can anyone (Sklarm) tell me how to open the battery - couldn't find any screws or something, all I could do is ruin plastic with my screwdriver :(
help plz and thx
parlaeman 2 years ago
be patient opening the battery. Use a small flat head screw driver and slowly go around the case just opening it a little bit at a time. This can take several minutes to do well, and less than a minute to just destroy plastic.
sklarm 2 years ago
Hmm, may I suggest if ANYONE is going to play with re-packing Li-Ion batt packs, they:
1) LEARN TO SOLDER PROPERLY. (Too much heat can turn a Li-Ion cell into a grenade) When soldering cells you need to do it fast & good. High blobs of solder means too little heat used. Solder not "flowing" means not clean or needs more flux.
2) Do not try & push the current from Li-Ion battery through self adhesive strips! You bought cells with SOLDER TABS on them.....USE THEM??!!
WIZofAu 3 years ago
This is really interesting to watch! Especially when I&TBPSQUOm at work right now. haha cool video hope you make more in the future
Chick6517 3 years ago
great video - who sings that song!?
GasperToronto78 3 years ago
That was LCD Soundsystem with "Yeah (Crass Version)", probably the best artist and hardest tune on this planet. YEAH.
sklarm, thanks for the vid, but the quality of yt videos made for some blurry text. Could you overlay some yt annotations instead? Maybe also add some note annotations on what you're doing, too :) It was a little bit hard to follow when you suddenly added the side cells, didn't follow what went where. Thanks!
nevyn 3 years ago
Sorry about the blurry text and lack of documentation of the process. I can post another video of a dell battery repack (which is pretty much the same thing). I have a very high quality version that i had trouble uploading to youtube.
sklarm 3 years ago
Let's make 2009 the year we never buy batteries again.
jaydedman 3 years ago
that was too fuckin pro!
4795623 declares this vid an epic win!!!
4795623 3 years ago
awesome ,will this technique work on pc laptp batterys too?
InfoBomb 3 years ago
Yes, this type of replacement is almost identical on most PC batteries. Especially ones that are over 2 years old.
sklarm 3 years ago
cool thx im gunna try it out
InfoBomb 3 years ago
Nice!
milt0nics 3 years ago
thanks alot
perfect timing
f417h 3 years ago
fabulously revolutionary. thanks so much for doin' this!
alyceobvious 3 years ago