Added: 2 years ago
From: nofearmotorsport
Views: 85,687
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (103)

Sign In or Sign Up now to post a comment!
  • Good car. I'm considering turbo setup for my gt but I don't want the lag. I really like the kenne bell 2.1.

  • @DZeze

    I had a KB 2.1 on my car before. Turbos are WAY better. Use small turbos, like the 52mm i used in this setup. Made 600ftlbs torque at 2800rpm at 13psi. Same setup otherwise as the KB motor. Twin screws are cool, but turbo makes power.

  • at the track it might hook then you could call it a launch

  • wow at a shit head, thats a amazing launch considering he's on slicks with no burnout before hand.

  • That mustang looks so fucking beast

  • Fuckin gay

  • ha padiddle

  • What is a troll?

  • good for a ford nice sound too

  • good for a ford

  • Sounds like that thing was hissing!

  • all that money into the motor and no body fixed the headlight

  • @BowtechmanTC because a burned out headlight bulb doesnt slow you down. why fix it?

  • @2fast4u324 lol very true but getting pulled over for a headlight does lol

  • @BowtechmanTC true... but they cant pull you over if they cant catch you! ;)

  • @2fast4u324 haha true but you cant out run the radio lol know a guy who had a zx10r and still got caught sometimes you win sometimes you lose lol but this is a sexy car i doubt they'd pull him over even for a light being out

  • I hate stangs........but i stiull jizzed in my pants!!!!!! hella sexy man finally a car done right!!!

  • Comment removed

  • holy shit! O_O

  • ahh the sweet sweet smell of MT'S in the morning

  • fuckin nice thats all i have to say you know the rest.

  • that was fucking sweet.

  • damn nd im a honda guy bt i love AM's to dad has a 350 ina pickup that hauls

  • bad ass car

  • i get that a 2 step is supposed to help with your launch but to me it makes it sound too much like a ricer... nice car though :)

  • @me922010 like a TUNER not rice

  • the 2 step is so subtle than... ppssssss p spsspsp pssppspspps screech.. gone

  • what 2 stepping ?

  • fucking hot

    

  • perdiddle

  • wow wat a shitty launch

  • @prosurfer2222 can you do any better in a shitty parking lot with your twin turbo mustang? twat

  • @prosurfer2222 No burnout in a parking lot without track prep in a car with power....what did you want dick face? A wheel stand in gravel? LOL Just cause you can launch your mom's boyfriends 99 integra without wheel spin doesnt make you a good driver sir 

  • @H2Prince lol you stupid jackass....where do you see gravel......and no jackass, i like to launch my 95 accord 2dr with a fully built h22 turbo at 22psi weighing 2800lbs stock with over 450whp.......how bout you asshole

  • @prosurfer2222 The wheel stand in gravel was making fun of you dickface LOL And My 87' Buick regal with a little V6 will embarrass your accord that you probably dont even own :D I sir talk shit on youtube WITH a car that can cash checks my mouth writes so i suggest you...shhhhhhhhhhhhh :)

  • @prosurfer2222 I also KNOW your lying cause anyone that actually has built and owns a fast car doesnt say it has over or around unless its a LIE. Like your 450 ass generated HP calculation. Good day ole chap

  • @prosurfer2222 Not everybody perfect like you!

  • @prosurfer2222 His tires were probably cold so he had no grip.

  • @jacobam1000 you dont do a test launch if your tires are cold......thats like saying you are making pasta and you put it in the pot with ice cold water....doesnt make sense......and if they were cold tires, than this retard didnt learn shit from that "test"

  • svensk!

  • hey that guys on SVTP

  • how much did those M/T's cost you?

  • wow, I think you need to get either stickier tires or lower the 2-step, too much power!!!

  • @minlos He's in a parking lot where the concrete isn't clean, and prepped like at a drag strip... not only that, but I don't think he even did a burn-out to clean and warm up the tires to make them sticky. Hopefully he puts a video up of him at the track... you could quite possibly see the front wheels come up on that car

  • @minlos the words," too much power," does not exist in this world

  • @minlos hes running drag slicks on a regular road. of course their not going to hook up like they would on the strip.

  • damn!

  • Is that an hks ssqv bov or what is it?

  • hey buddy you got a headlight out. didnt know if you knew or not. sweet car though. i can two step. i have akways loved that song. i didnt know it had anything to do with cars though. yea i like that car alot i have always loved dodges. well see ya

  • I need my Stang to do that!!!!!

  • horrible on the turbos

  • a real 2step fires the cylinders every other rotation letting a bunch of unburnded fuel in the exhaust. when that explodes in the exhaust it spools a turbo really quickly..... well thats what I was told.

  • nice

  • beast im jelous

  • how does 2step works ??

    extra fuel injection in the exhaust, fore more boost ????

  • too much wheel spin

  • im not sure what a 2 step really is. Is it only used with a turbo?

  • Damn

  • victurus2k6 you have not a clue as to what you are talking about. all us big block CARB cars with AUTOMATICS use 2steps. stay off internet idiot

  • cool!!!!

  • CAN someone explain a 2step launch please... O..o

  • Its a rev limiter that you can adjust, so when you activate the 2step, you floor it, it limits the RPM, yet allows load on the engine, casuing the turbo to spool before actual load (acceleration) is done. It does this by cutting off some igintion to some cylinders, thats what causes the load. Its best used on either FI cars or ones with a manual transmission. Hope that helps.

  • yeah it does thanks so much ive been watching these videos tht say 2-step launch n felt stupid bcuz i didnt know what or how u did that

  • You're welcome.

    :)

  • @Vikturus2k6

    Hehe, it doesn't cut off ignition to cylinders, just retards the timing

  • @LordLo cutting off igntion, delaying, retarding it.

  • BOV is a TurboXS RFL-H i have the same one

  • awesome!!! what kind of bov is it????

  • Badass car! I got a single turbo mustang. Love the sound of a turbo, open wastegate and bov.

    What BOV are you running? Sounds good

  • u guys need to get that car to hook... spinning at 3k rpm... thats very imporoper tuning on the car

  • @johnny66o1

    nothing wrong with the tune man. almost any car making any kind of real power is going to spin on bare asphalt no matter what you do.... especially off a two step.

  • i dont mean the tune as in dyno tuning. i mean dialing in the car to get it to hook.

    my buddies blown 565 in his camaro doesnt spin that badly.. it yanks the tires and goes on 2 wheels.

    im 100% positive that my buddies blown 565 is making double if not triple to horsepower then this mustang.

  • my buddy this, my buddy that. go suck your budies dick, buddy. LOL

  • @johnny66o1

    Buddy, do you understand that hooking on the track and hooking on the street are 2 different things. In my stock trans am with drag radials I still spin on the street, but at the track I hook perfectly lol.

  • @papaown I hope you still dont have a 10 bolt behind that thing

  • @zunetrav4

    Lol all I have is an slp air lid, dumped before the muffler, shift kit and nitto nt555r drag radials, the 10 bolt should be fine for a while

  • @papaown Lol well i hope, but i've heard of bone stock motors being to much for regularly raced 10 bolts

  • @zunetrav4

    Uh, nope thats just a rumor probably because the 12 bolt is much better, but the 10 bolt is still a good rear. I've had my ws6 for 4 years, 3 of which I've had drag radials.

  • @johnny66o1 Lol dude hes on a dusty parking lot.. of course it aint gonna hook with twin turbos.

  • Tires are great, but weather looks really cold there, would have done a good burn out. take some pressure out the tires and look at suspension. That bitch will launch like NASA

  • na like i said either way import or domestic

  • i like these tires at rear

  • i wish muscle cars werent that expenstive in europe

    fucking 2000€ on taxes alone a year

  • hell ya a european muscle car fan!

  • Comment removed

  • @hockeyman474 i think that might be canada

  • @2008PowerStrokeF450 its not, it is in europe, i think the netherlands if im not mistaken

  • @stuntrider15 netherlands, europe.....same shit lmao

  • @95DC2typer i know the netherlands is in europe, i was just saying to the other guy the car is in europe, the nether lands if im not mistaken....get it now?

  • @hockeyman474 people in america like european & japanese cars, you shouldn't be surprised. if it's for sale somewhere, chances are somebody will like it.

  • ricer blow off or not, blow off valves sound sick on import or domestic

  • import in this case,

  • what kind of bov is that?

  • love the bov

  • lol he got's a ricer blow off valve

  • but i bet it better then your turbo gsr bov... hks probley.. he mostlikey spent the extra cash and went with tial 50mm or something that can vent more air then your 1.8 can move.

  • I have a Tial BOV and 2 38mm MVS WG's and clearly you dont know what they sound like..... surely not like this

    I am assuming your just another keyboard racer that comments with little to no knowledge at all.

  • o well to tell you the truth i dont really give a shit. im just sayen every honda guy is hks, greddy

  • i feel the need to correct your first statement as well, motor size has absolutely nothing to do with the size of the BOV, size is supposed to be determined by the turbo, a large turbo moves alot of CFM and needs the larger valve area to release the pressure in the alloted time.

    Every non-ebay built Honda I know runs Tial shit, welcome to the 21st century

  • Brutal. :]

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more