ProJect GENESIS #2 (Vaporizer Blueprint) explained

[vlasho53]

Hello, please can you send me copy of this plans? My email is vlasho@seznam.cz . Thank you very much.

[falvarado113]

I am sorry to bother you, but I too would love to get these plans from you, it is amazing what you have done, and I would love to try it too. falvarado@wowway.com, or if it's ok, can someone who has already recieved them forward them to me, Thank you so much for your video!

[timperkins777]

Please send a copy of the file to tim.perkins775@gmail.com It looks like you have a good system there.

[kalbotisoy]

Paki send po sa kalbotisoy@yahoo.com maraming salamat po.

[kalbotisoy]

Kuya pwede po ba sa diesel yung mga fuel savers nyo po??

[explorer9493]

nice plan bro. i would like to try it on my car could you please send me a copy roland_9493@yahoo.com thanks

[bustfer07]

please send me a copy fernandobustamante84@yahoo.com thank you

[tonitopr18]

orry for the inconvenience, I know everyone is asking you to send data but the truth is that your idea is good and I like to have it. If you want to share with me would greatly appreciate it. My email is bgsa@live.com and thank again for this idea.

[jisaacson89]

please send me a copy jisaacson89@yahoo.com. thanks i appreciate it :)

[ramsmall]

You have done a magnificent job! Very nice project. I have been working on a vaporizer design in my head for a while now and while researching I have watched your video contributions. Thank you for them. Would you share your Project Genesis plans with me? Thank you. My email is ramsmall@yahoo.com

[pvar06]

My mail ID is pvar06@yahoo.com . Requesting you to please send me a copy of plan.

[ole3toes]

Please send a copy of your plans to mromance2u@yahoo.com . . .I have another step for this unit, I believe. Thank you

[MAPKLA]

hi, just saw your vids about project genesis, i want to try it out with my car, can you please send me a copy,my email add is emit_wohs2000@yahoo.com. thank you man



[MAPKLA]

hi, just saw your vids about project genesis, i want to try it out with my car, can you please send me a copy,my email add is emit_wohs2000@yahoo.com. thank you man

[MrAndrew7204]

hey this is great could you send my the diagram plz?

[providencios]

Kindly send a copy of you diagram. Thanks a lot

[adolescent900]

there should be a blueprint showing how to build a vaporizer you can use for herbs. where can i find that?

maybe easier to buy a one, take it apart and find out? too expensive though just to do that.

any information would be great, thanks

[ashtweth]

Hello my friend!! is this an updated version of your last genesis? 

[CBE21JOE]

I like your set up i've got a similar idea to your set up and i would like a if you would send me a copy of your file

[hydrogenassist]

Are you using the PVC valve line for the vacuum?.

[livinloud1984]

you are realy smart man :) would you bee so kind to send me the plans?

[jopinoypower]

give me your email add and ill send the plan.

[clavel15]

@jopinoypower

i'm new to this project, please send me the plans, here's my email...clavelciriaco@ymail.co­m. thanks and may God bless us all...

[makamharish777]

excelent work.....would you like to send me your plans.thanks a lot.

[daflydecoy]

Would you be so kind as to send me your plans. Thank you for all of your work and research.

[MINIBNRR]

I run the gas through the normal tank to a oil cooler that heats the gas befor it reaches the vapor tank, then its returned to the 12 gallon tank if not used. I use E85 its 85% ethanol alcohol 15% petro. My question is were is the air bleed befor or after the butterly valve? Does it only turn on when you hit the gas? My car runs too rich it needs this valve HELP please. I am runnin a 1992 integra GSR B17A1 VTEC, runs fantastic, just a little too rich, I use two of the vortex devices. :) B17ADB2

[jopinoypower]

check out my other videos about the airbleed. Its after the throtle. its tapped in the intake manifold. yest it shold only turn on when you hit the gas.

[learntcm]

@MINIBNRR Can you please send me copy of the file. I am in UK and I want to make one.

Thank you and I love your work

[PYROTEKNIKS801]

dude you should get a patent before your idea gets stolen

[poisonknives]

i am very interested in your project i would love to have the blue prints please send me the file.

[GBH2o4u]

Youre idea is very good, Have you tried it on your car?If so how much improved mileage did you experance? I would like to share with you another safty feather, when the cool vapor goes into the intake, I recomend putting a spark arrester on the line going into intake this will insure that incase of a backfire that the flame wont go up the line! I Love your invention and it is what we really need to help clean up our air! Thank You and I look forward to hearing from you, Jasen P.s. plz K.I.T

[jopinoypower]

Thanks man, please watch my other videos. it shows the actual application to my car.

[rooster8214]

Please send me your plans. Thank you.

[jopinoypower]

message me your email address so i can send the file to you.

[VDVpd]

Hi there, as flatheadaus is saying ... you do you reduce the fuel comming from the carb !? aren't you adding the vaporizer fule to the carb-mixture !?

I'd also be interested in the "file" you are mentioning to better udnerstand this.

Thx from NL

[jopinoypower]

yes im adding vaporized fuel so i adjusted off carburetor. it runs same but lesser fuel consumption.

[electric789]

nice. try an ultrasonic transducer (ultrasonic fogger) in the bottom of this, or better yet about 10 ultrasonic transducers. You would get thicker vapor. looking forward to future updates!

[flatheadaus]

Also,what is the ideal fuel level over the bubbler?I find it hard to see how a small engines vacume can pull enough to do this with carb open any.

[jopinoypower]

the level should be high but not too high that liquid gasoline exiting your gas vapor output hose. Higher level = richer vapor. if your engine has a vacuum in the intake manifold even if its weak it will suck gas vapor in the vaprizer.

[flatheadaus]

Hi guy.really like your progress on fuel saving.I am interested in where the vapor plumbs into the carb or manifpld.and how the petrol to carb is slowed down ,or stopped when the device is activated.can you clarify for me please?

[jopinoypower]

the gasvapoer line is tapped on the intake manifold to PCV connection hose using a T connector. the vaprorizer is always working so you can udjust off the you jetting in the carb. if you have EFI engine the computer automatically cut the fuel injection because the sensor detcts excess fuel. if you want more details, message me your email and i will send you trhe file.