invert halo too hopper

[RaGeGaming2011]

Hahah Fat Ass

[serranoedwin13]

Will this fit on a smart parts ion

[patmeserkhani]

can the halo too's internals fit in a halo shell?

[Y0UTUB3PRODVCER]

Nice description and FOR THOSE WHO ARE TRYNG TO DO THE DROP TEST WITHOUT MAKING SOUND JUST SET IT TO=SPEED GREEN LIGHT=4 5 or 6 MICROPHONE SENSITIVITY OPTION {YELLOW LIGHT} TO SETTING 6 AND THE RED ONE. TO 1 and start the loader again but with these new settings and the drop is yours!

[aussyownz16]

yo i just bought one will it keep up with a dangerous power g3?

[superinsanepballa123]

@aussyownz16 I wouldnt put it on a g3 get a vlocity if your gonna buy a hopper under $80.00 way better than the invert too

[StopMotionMind]

Honestly, you sounded like you have no clue about the halo too....

[HardcoreGamer773]

Im having a problem with my haloB v35 loader, it was bought second

hand a few months back and only really getting round to fixing it now,

basically when i have the batterys connected the motor wont stop running

until i then disconnect the battery again. also the bottom right hand

side of the board "J2" gets very hot after about 20seconds which

shouldn't be happening. any help would be greatly helpful.

thanks. PM me please

[cole12345ful]

@Zeppelinfan1994 it's not sound activated it's broken you retart

[stompnd]

@cole12345ful

the invert 2 is sound activated...it uses a microphone to feed, its not broken.

[56dreyke56]

would this be good for a spyder pilot 09

[DANisTHEman812]

what mode should i use for my g3 on auto

[spadez607]

fyi all halos are forced feed ;-)

[PBheadshot]

I own a BT Tm7 with an Invert Halo Too and the my Tm7 full auto is set on the stock setting which i think is about 13-15bps and the hopper keeps chopping even on semi. could it be that the microphone setting needs to be turned up because the tm7 in a queit gun, or could it chop because the gun has eyes and the hopper is sound activated?

[wiilikepie]

For some weird ass reason sometimes the BT Tm7's don't like the Invert Too's, my advice would be to make sure the feed stack monitoring is on, check your drive cone and make sure nothings blocking it, look in the feedneck and make sure nothing is in the feedneck chopping the balls, once you disassemble the loader and make sure everything looks ok inside of the loader turn it back on, put it on the highest mic sensitivity and lowest speed setting, with feed stack monitoring on.

[MosesandtheBigStick]

guys dont even comment these vids they are dogshit ok look at his paintball equipment vid his hopper is only 20 dollars less than his gun this kid is a tool all his gear is crap except for the hopper and anygood paintball needs a jersey pants gloves? WRONG! i played my first 3 YEARS OF PAINTBALL WEARING LACROSSE SHOTER PANTS AND A SOCCER GOALIE JERSEY! I MADE IT BY PERFECTLY FINE AND I WAS PRETTY DAM GOOD! get some better shit!

[zoopals9]

i realy dont think any one give a shit that you played in lacross pants and i dont think any one care that you think this kid is a "tool" who cares if his stuff is "crap" maybe hes realy good too you know cause you where so good with your lacross stuff which realy duse not affect you playing to much. Your just being an asshole for no reason maybe hes not rich and cant afford an expensive gun.

[chrismakarov2121]

and i bet your a rich kid who got a dm for his bday not every one is rich like you i started playing paintball with spyder vector now im playing with a dye nt and bob long vic so dont be a goof like mike from techpb says its not the gear its the player if he can win with that gear thats sick if not later he can always get new stuff hater

[jd575]

My hopper is about thirty dollars less than my gun. Guess what? I have a F&*^%'n blast every time I go play. You all get so into gear and forget that we play to have fun. Give the kid a break.

[thedarkhorse19]

bacconater ur a fuking idiot im pritty sure if you shoot 180 in ten seconds thats 18 balls a second nawt 180 a second faggot

[Assclown13254]

hes fat and dumb like most of the usa

[littletim79]

do you have to have the voice crap

[sicksurfer1]

i turned mine up all the way if you dont have the microphone up high it will suck

[rubitz96]

a microphone your a dumbass

[thedarkhorse19]

i shoot 180 pballs in 10 seconds :P

[MrMDbaseball11]

can you get ripdrive for it

[macsgo2hell]

yea u can, its rip drive ready...

[Dman42911]

next time you make a video place the camera better. i didn't even get 10 seconds into video becuse your gut was disturbing

[MrPballer03]

is it possible to de activate the sound thing?

[wdikolnc111]

like the sound activation? if so than yea you can

[JCrawn51]

would this fit on the elbow of a 09 Spyder RT?

[zeppelinfan1994]

im sorry idk

[militaryflyboy22]

it should you might have to sand something down but it should fit. try upgrading your feedneck to a clamping one

[nickeftink]

Sell the spider. Elbows suck..

[K00LpAnCAkEz]

@JCrawn51 yep

[ANoobsGuide]

@JCrawn51 yup

[xzsfgkl]

@JCrawn51 thats funny i hve the same gun. its pretty rare, glad i found someone else.

[hubby108]

would this be good for my ion xe?

[zeppelinfan1994]

yep

[PBheadshot]

out of the 6 speed settings which one should i us for shooting 14 balls a second and what one for 20 bps

[zeppelinfan1994]

i guess the 4th setting

[MK3K4V]

just leave it as it is, you dont need to adjust it unless your shooting 22+ bps

[overdrivelovesfang]

3 or 4

[MosesandtheBigStick]

great hopper you set up is shit though instead of spending money on a crap gun and jersey and shit buy a good gun and use a hockey jersey and swaet pants

[derekwaa]

halo b or invert too?

[zeppelinfan1994]

invert too

[123pber]

does the regular halo speed feed fit on it???

[Reid7ec]

yep

[mebescottv]

i believe so.

[prooney526]

yeah

[joexster1]

how do u select diff modes

[abdulios]

you double click the button... then it will show you what settings its on, then it will let you select your settings, first is green(speed), second is yellow(sound sensitivity) then third its red(ball stack monitoring) there are videos out there i believe on how to change it

[misterbonfire]

whats the difference between the three?

[abdulios]

the three what? settings?

[misterbonfire]

Yes brotha

[abdulios]

well... one's speed, one's sound sensitivity, and one's ball monitoring...

[PBheadshot]

yeah 3 settings. speed, microphone sensativity, and feedstack

[jollyperson12]

is it like the vlcity jr were it just keeps jamming balls in and is it loud

[zeppelinfan1994]

no its quiet and it doesnt jam

[thepayneites]

and it isnt continuious spin

[bupkiss24]

so it will only load when in fire right?

[zeppelinfan1994]

yep

[jollyperson12]

kool thanks

[FrofFish999XXX]

does it have eyes to tell when you stop shooting or does it go for ever

[iMaggot1337]

it is activated by sound so when you have no more balls it stops

[zeppelinfan1994]

yep

[zeppelinfan1994]

i does not have eyes and i t doesnt keep loading. its sound activated so when you shoot it will reload

[ckwik09]

it doesnt have eyes but it does have a microphone so whenever you shoot your marker the loader will feed.

[xoxJELL0xox]

if i put my g3 on full auto(25 bps) will this keep up

[zeppelinfan1994]

yep

[xDaRk0psx]

actually i think its maximum speed is 23 bps

[skierdud89]

it's real max speed isn't really rated. halo just says 20+

[xDaRk0psx]

really ok i thought i saw 23 lol

[thepayneites]

no, its definitly more, i dont know exactly, but when i have tryed some, its more like 25+ (one time i even got like 30 something, and i was like, "holy shit!" xD)

[DVSpb1]

its fuckin fast it keeps up with my rail

[zeppelinfan1994]

this

[live2pb56]

will it go off if u r running

[zeppelinfan1994]

no it wont

[PBPLaYeRx540]

how do u change the speeds nd sound options for the hopper

[zeppelinfan1994]

when it changes the color that you need it to just press the button the amount of time you need it be set at

[cdrabljb]

yes

[abdulios]

can u change the AA batterry harness into the 9V? like what u can do with the halo style loaders?

[zeppelinfan1994]

ye4s you can change the AA batterry harness into the 9V.

[abdulios]

do you know how fast that will make it?

[zeppelinfan1994]

it will just stay the same

[abdulios]

i thought that the 9v converter makes the loader faster?

[thewedding123]

no. in the maunal it says not to do it because it wont provide enough energy

[abdulios]

the two 9v? how, that would provide more energy than just the 4 AA

[DangerousePaintball]

good video

[1angermanpaintballer]

do they got them in canada?? lol i cant even find the pinokio in canada i went to 2 paintball store cant find it lol

[zeppelinfan1994]

sorry i dont know if they are in canada

[OhxXxSnap]

Ebay bro... ebay....

[lumberjackoverdrive]

yeah man, they're in canada, i just bought on today, the pinokio should be here too, i dont know where you went, but the halo too if definatly in canada

[abdulios]

lol yo just ask ur local paintball store to order them in for ya. and yes they do have them in canada, i live in london ontario and am gonna get one soon from flagswipe paintball store/field

[thewedding123]

good job.

[zagpb]

how is the shell? durable...like drop from 6 feet no cracks durable?

[YuanMizzle]

lol... yes please test for us. :D

[LedgendaryChief]

they say its the same shell as the rotar

[edfrizzle]

good review zeppelinfan!

[jennaahh1234]

that was cool

[dee7976]

Good job on the review. I'll be posting up one myself.

How are you liking your setup?

[pokersource]

good review. thank you.