how would a person do a whole compound bow? Does the water need to be hot, warm, or cold, does it matter? Would the bow need to be disassembled first?
Had a question for you that i cant find on any of the sites. I have a Glock 22, i know i must be able to do the lower plastic half but what about the slide, will this stuff go onto metal and stay... and if does stay would anything happen if it gets to hot from firing my Glock?
I m really interested in doing a deer skull mount. Any advice as I don't see an sample of that here or on their website.
What base color paint would I use? Or would I skip that part and leave the bleach white skull as the base? Also, when doing the skull mount, its covered with a lacquer type sealant, do you think I should skip this part in making the mount since I will be scuffing it up w/ that pad anyways? Thanks !
when you take a section off the roll does it matter which side you use? I unrolled mine and it looks glossy on one side and matte on the other. wasn't sure which side to use and if it matters?
So I'm obsessed with multicam, and you said the color you paint the item before you dip it will show through? if you had to make multicam how would you go about it since the patterns aren't quite there yet...
Have you ever dipped the barrel of a rifle? If so could you explain how? I am worried about getting the gun wet? And i know they get wet and what not but ive never fully submerged my whole gun
Awesome video. Can you please dip a gun barrel? I haven't seen any videos of a gun barrel actually being dipped. I've only seen photos of before and after pictures.
I have a Hogue rubber stock that I want to do this to. Has anyone tried it ? I'm concerned the rubber will not take the hydrograph. Any recommendations are appreciated.
How much does the temperature of the water affect the final result? I got myself a kit and it specifically states that the water temperature should be around 30C (+/- 2C)
Thanks for uploading these vids. They are very helpful by the way.
When you dipped the picture frame the tape was on the bottom of the film. Then with the light switch cover the tape was on the top of the film. Can you explain this for me please.
what if...now im just thinking out loud but what if .....you put that in your pool,......and jumped in it and camo your whole body.....be pretty neat eh?
hey dude, awesome vid how could you do that with the full shotgun? what would you have to seal before you put it under water well i will be doing it with a rifle any ideas? send me a pm thanks dude
Oh hai, Ill teach you how I make tons of money protecting links and youtube. Google some royalty free wallpapers, songs or templates. Upload those to megaupload or something. Then join bee4biz (just Google it) and use them to protect your download link. Make a video advertising your royalty free download and post protected download link in description. bee4biz pays you when people complete a survey to unlock your download link. They pay weekly and via Pyapal or moneybookers
hi i live in ireland and theirs notting like that here.i would love to be able to order this product.theirs lots of people into airsoft and hunting that would kill for this here.john
looks great dude! I am thinking about it but have a paintball gun with piccatinni rails.... how does that work? will the rails have any goopy stuff in the little corners? Is it resistant to scratches? We play hard and the guns get a little worked sometimes....
ups just droped of my digital camo dip kit just the other day , im getting ready to dip my remington sps stock i think it will work good , what do you think.
So... Could you send me some of that in the mail??? haha... I wanna camoflauge my dog! That would b sooo... funny. I loved that website for the zebra print! Thanks for being so AWESOME!
I'm not into dipping yet, but i did read a lot about it, so it could be several things that can go wrong like:
to cold water, not enough activator, or even the wrong side of the film on the water.
Just ad a little water on both sides on a corner of the film. the side that is getting sticky is the side that should contact the water, so face down while the other dry side is the side where you spray the activator on.
Wow, men and women are exactly the same. For the most serious nail art girly girl she would have a cup of water and put drops of nail polish until she had a sheet of color floating on the top of the water and then you put your nail slowly on top at an angle and then your nail is covered in the design! It is really weird that we are so similar.
I'm in Argentina. My question. To ask or look. Exact name of the lamina (who distribute it.) That is the keeper (name) and that other elements are used. VERY GOOD VIDEO. Of course I appreciate the information. Greetings from Buenos Aires-Arg.
I'm in Argentina. My question. To ask or look. Exact name of the lamina (who distribute it.) That is the keeper (name) and that other elements are used. VERY GOOD VIDEO. Of course I appreciate the information. Greetings from Buenos Aires-Arg.
So what do you do if you mess up or your not satisfied with the way your product turns out? Is there a way of starting over or doyou just redip it? What about normal wear? what do you do when it starts wearing off?
@langdontd I think that you can sand it off depending on what material you stuck it to in the first place but there are no do overs...sucks! But I think this whole thing is cool so maybe try a mini kit and go from there. Oh and I think that you can buy a type of seal in can of spray paint that is clear obviously and you can have it be in a high or and semi gloss, or a matte finish to protect the color.
WOW!!!! This product is awsome !!!!! always wondered how they did it ,now i know.
I want to order this but i hope they can ship it to Cyprus . I got 5 guns that need doing .(including an antique shotgun tha belongs to my dad :0) ). Great vid bro . ( my mind is now like ok so what else can i camo now aahhhhhh!!!!!!!
Hey come to think of it - since you do such an awesome job how about I send you my kit and items and you can do them for me! heheheh I mean hey, if you ran out of things to dip! I'm just thinking of you man, thats all! Thanks again for the great vids!
Great job. Btw, do you know what the activator is made off? Because some dudes offer the formula for 25 dollar on ebay, so that you make your own activator. I saw many other movies were the yhave a proffesional tank, so i checked out what those tanks cost, and they are 5 up to 10k!! Now that is madness, because a cheap tupperware box works just as fine. Last question, i want to buy foil from china. So does all the foil come from there, or is there any brand that is recomended?
Dude - that is so freaking awesome!! My kit just came today but there were no instructions included with it. But I think you covered everything in your vid well enough that I am confident I can figure it out. One thing I didnt see in the vid, once you dip it and it dries for a while, then you spray it with the clear coat right? I am going to test it on a few items then do my son's cheap little Bushnell scope b4 I do my own. I also want to dip the barrel of my Savage Edge 243, any advice on that?
@trippledigitss lol thanks man, I am really surprised that there were no instructions...in a nutshell, you dip the item (make sure the water is WARM..a lot of guys are having this problem, the water is too cold and the film just melts away) after you dip the piece, you want to immediately wash the slime off. after all the slime is gone you let the piece air dry (i would say overnight) then you clear coat it. Make sure you do a few test runs first...get comfortable with the process..good luck!
@prolificglass I think it's just the water. I'm guessing if there were air bubbles the lack of water contact causes problems with the change from film to liquid paint rather than leaving visual anomalies in the camo.
Can you tell me how hard wearing the material is? i want to put it on my Sniper stock, and I'm concerned it will simply scratch off after a few days out in the woods
@phantomshooter01 if you're throwing your stock in a wood chipper, yes it will chip and crack...the film is tough stuff, you need to protect it with clear coat...as with anything, it's not indestructible, but its not a coating of flower petals either lol
@bowhunter4e ... I am gonna be in deeeeeeeep trouble... there is so much stuff in my home I can camouflage ... You sir, are an enabler!!! ;) ... thanks for the great tutorial and links. Looks like I have a new hobby! If you are going to do an AR rifle, would you just do the furniture or would you do the whole rifle (upper and lower receivers as well?)
How easy is it to do a deer skull, does the camo dip wrap around the skull completely in 1 dip, or does it take several? How does it do in the cracks and crevices?
@tame444 I've never dipped a skull, so I really can't speak as far as experience...I'm sure that if you contact the manufacturer they could give you some good tips. Good luck and thanks for watching!
This is the same thing as Duracoat right? if it is this stuff is amazing. I have a woodsball paintball gun that is fully camo coated. It is some of the toughest stuff. The gun has been thrown aroun,landed on by me against stickand rocks and it still looks good. The only downside is it was so damn expensive to have a shop do it.($300) Just for i would say maybe 1.5-2 squ.ft. I am going to buy one of these kits ASAP. Thanks for informing people on this kit.
will it work on all material. wood,metal. i have a synthetic 870 and i have been wanting to do my slug barrel and stock and forearm. i was just wanting to know if i could do that. i was going to send it in but i sent i knife in and they charged me 45 bucks to do it, so i only imagine how much the gun parts would be.
salve vorrei dipingere il mio fucile, e vorrei sapere dove acquistare l'occorrente per camuffare il mio fucile, potresti dirmi gentilmente dove acquistare l'occorrente?....grazie
Very nice set of videos. Thanks for the wonderful and fully explanatory steps to follow for the DIY-selfer. Camo is not my thing but you have acquired great technique using the dip kit. I will be using a wood grain kit in the next couple weeks for a project of my own. 2 thumbs up!
I am wanting to hydrograph a sniper rifle project using 'The Ultimate Sniper' stock from Choate Tools (viewable on their website) but this particular stock has a very large thumbhole cut out (almost like a 'skeleton' stock) and I am concerned that the film will not 'wrap around' to the inside of the thumbhole cutout to camouflage the inside (just as the film did not wrap around the picture frame to the backside) How well will the film wrap around flat areas? Can you re-dip bare spots later?
@robbie8600 I would recommend that you dip the stock in 2 parts...that will ensure good coverage. Mask off one half of the stock (right down the middle) then dip that side and let it dry, then mask of the area that you just dipped (make sure it's dry- i would let it sit overnight) and then dip that side. If you run into spots, use a magic marker or airbrush to blend it all in- if you mask off and re-dip spots, it will look jacked up, the marker and/or airbrush blend it a lot better.
@UltmtSniper it's the same exact stuff that the professionals use...if you have a gun or bow that's camo, odds are it was hydrographed. once you let the dip dry, then you clear coat it...it's not bullet proof lol, but it holds up awesome.
@S0C0MIII you can do metal, but you need to get a self-etching primer...i would suggest calling the manufacturer and get a recommendation on a specific brand.
hey does it has to be like cold or hot in the room? I heard that there has to be some kind of temperature and air specification to store the film and make that hydrography is that true?
We are in South Africa and have been trying the process from some time. Small bubbles form after we have dipped the product. It seems as if we are using the wrong base coat, we cant seem to get the answers from our chinese supplier. Can you please point us in the wright direction?
I have a hoyt ultra tech would the flexible parts be able to be printed, or would the flexing parts chip and peel off?
ymdeardorff1 2 days ago
how would a person do a whole compound bow? Does the water need to be hot, warm, or cold, does it matter? Would the bow need to be disassembled first?
ymdeardorff1 2 days ago
Had a question for you that i cant find on any of the sites. I have a Glock 22, i know i must be able to do the lower plastic half but what about the slide, will this stuff go onto metal and stay... and if does stay would anything happen if it gets to hot from firing my Glock?
RobertDelahaye 2 days ago
I dipped my wife and now she is purdy. Purdy good at hidin. Let me know if you find her.
atomicpickle 5 days ago
7:38 "That is just baaaaad!!" XD
MidnightRunzMKIV 1 week ago
I m really interested in doing a deer skull mount. Any advice as I don't see an sample of that here or on their website.
What base color paint would I use? Or would I skip that part and leave the bleach white skull as the base? Also, when doing the skull mount, its covered with a lacquer type sealant, do you think I should skip this part in making the mount since I will be scuffing it up w/ that pad anyways? Thanks !
leinhit 2 weeks ago in playlist Uploaded videos
can you do this with clothes?
EliteSockCompany 2 weeks ago
does the water need to be warm?
NoVaTutz 2 weeks ago
when you take a section off the roll does it matter which side you use? I unrolled mine and it looks glossy on one side and matte on the other. wasn't sure which side to use and if it matters?
SPETSNAZKACZ 4 weeks ago
Why did you do it to your hat?
hintzofcolorconcepts 1 month ago
This has been flagged as spam show
So I'm obsessed with multicam, and you said the color you paint the item before you dip it will show through? if you had to make multicam how would you go about it since the patterns aren't quite there yet...
acidlittle 1 month ago in playlist More videos from bowhunter4e
This is the coolest fucken thing ever.
BonesTheCat 1 month ago
why cant you get this stuff in the uk....
FleurReece 1 month ago
ouemđii*_*
TheStella139 1 month ago
where can i buy it
maheradam25 1 month ago
@maheradam25 on ebay for about $100.
estrickersc 1 month ago
How many rifles (AR type) can you camo with one kit?
browneye77 1 month ago
@browneye77 Yeah I'd like to know that too. Proly just one.
ROBERTLUCIAn 1 month ago
B . E . A . Utiful
j5pointoh 1 month ago
Iphone*
MrDudeOnAComputer 1 month ago
You think I could dip an iPod otter box?
MrDudeOnAComputer 1 month ago
Have you ever dipped the barrel of a rifle? If so could you explain how? I am worried about getting the gun wet? And i know they get wet and what not but ive never fully submerged my whole gun
Michaeldashizz 1 month ago
"DIY projects for little or no money" How is this cheap if the kit is $100.00
kame25 2 months ago
what is the cpo primer, just a clear primer?
mikeyg0311 2 months ago
will this work with airsoft guns?
punk1200 2 months ago
Wait a minute, what exactly were you implying at the end
inuyashacoolieo 2 months ago in playlist More videos from bowhunter4e
What Temp. Is the water
MrCSparKz 2 months ago
@MrCSparKz 70-80º
Narukai12 2 months ago
Awesome video. Can you please dip a gun barrel? I haven't seen any videos of a gun barrel actually being dipped. I've only seen photos of before and after pictures.
countrykang8 2 months ago
very nice
Eastwardhunting 2 months ago
if i had a big enough container could i do a full rifle stock in one dip?
troutfisher98 2 months ago
i watched part one yesterdya and thought this would be so awesome to do with a europen mount
nichoharri 3 months ago
I have a Hogue rubber stock that I want to do this to. Has anyone tried it ? I'm concerned the rubber will not take the hydrograph. Any recommendations are appreciated.
jamessp007 4 months ago
Would you do a barrel at the same angle as the stock...any tips on the barrel would help.
aztec2303 4 months ago
hey am from uk great vids man just made them shooting sticks work great
gpz50055 4 months ago
How much does the temperature of the water affect the final result? I got myself a kit and it specifically states that the water temperature should be around 30C (+/- 2C)
Thanks for uploading these vids. They are very helpful by the way.
32KOFDATA 4 months ago
When you dipped the picture frame the tape was on the bottom of the film. Then with the light switch cover the tape was on the top of the film. Can you explain this for me please.
AudioAction 4 months ago
@AudioAction there is really no reason whatsoever, I just so happen to tape the one side rather than the other.
bowhunter4e 4 months ago
How tough is this stuff once its on there and dry. Is it just going to peal off or is it like painted on there now?
ShroudedCuteness 4 months ago
I was trying to figure out how to do this to my car
ShroudedCuteness 4 months ago
what if...now im just thinking out loud but what if .....you put that in your pool,......and jumped in it and camo your whole body.....be pretty neat eh?
mkjredemption 5 months ago
Sick stuff, makes everything you dip look bad ass!
airborne1promodeler 5 months ago
i wanna camo my girl.
KingXofXGames 5 months ago
All is good, got a response not long after my previous post.
performancecatapults 5 months ago
Placed an order over a week ago through Timbers Edge. Haven't been charged, and no reply from my inquiry about the order.
performancecatapults 5 months ago
Just incase i take my photo frame or light switch hunting :S
Typho0n86 6 months ago
Get better woodland camo!
123sweyn 6 months ago
that is fresh as a farmers market :p
INFR4SLIV3R 6 months ago
Can you camo an entire car?
cb2k761 7 months ago
Can u do arrows
Turkey12328 7 months ago
Damn he called his wife a thing. I wonder what his wife calls him?
mszczepaniak 7 months ago
Hahahahahahahahaha
Turkey12328 7 months ago
I'm gonna camo everything within arms reach when doing this! XD awsome video!
HunterSurvivalist 7 months ago
This has been flagged as spam show
Продаем пленку по России , Украине , и др странам .
Пленка 90 см - 8 $ за метр
Пленка 50 см - 6 $ за метр
Пленка хорошего качества не тонкая .. хорошо ложиться при соблюдении технологии . тел 89125531005 Андрей Викторович .
Skype login- imeris-vorkuta
ICQ 399157753
Отправка EMS и др компаниями возможными в вашем регионе .
Заказ от 100 метров и выше .
высылаем каталог пленок
Imeristrading 7 months ago
Holy-titty-licken-double headed-prostitutes!!!! I'm gonna camo up my bass guitar!!!!!!
Wergrun 7 months ago
that is crazy cool!!! luv it!! i wanna do my hubby's outlet covers for him for his man cave, great idea!!
GlamUpGurl 7 months ago
oh snap im gonna camo everything now
ultrabeastmode 8 months ago
did he do his curtains too??
beeniemike 8 months ago
hey dude, awesome vid how could you do that with the full shotgun? what would you have to seal before you put it under water well i will be doing it with a rifle any ideas? send me a pm thanks dude
blackmamba5282 8 months ago
Comment removed
blackmamba5282 8 months ago
Comment removed
blackmamba5282 8 months ago
Is there any way or any place to get other camos from ? or is mydipkit.com the only place ?
iScopedThePope 8 months ago
Oh hai, Ill teach you how I make tons of money protecting links and youtube. Google some royalty free wallpapers, songs or templates. Upload those to megaupload or something. Then join bee4biz (just Google it) and use them to protect your download link. Make a video advertising your royalty free download and post protected download link in description. bee4biz pays you when people complete a survey to unlock your download link. They pay weekly and via Pyapal or moneybookers
hnscluj 8 months ago
Is this available in sweden?!
wlangedirrw 8 months ago
Comment removed
sophiadaqween 9 months ago
Comment removed
sophiadaqween 9 months ago
hi i live in ireland and theirs notting like that here.i would love to be able to order this product.theirs lots of people into airsoft and hunting that would kill for this here.john
sophiadaqween 9 months ago
I'm thinking about dipping my dirtbike plastics. How hard is it to remove the film once it has set.
aeavreornitt 9 months ago
looks great dude! I am thinking about it but have a paintball gun with piccatinni rails.... how does that work? will the rails have any goopy stuff in the little corners? Is it resistant to scratches? We play hard and the guns get a little worked sometimes....
BadgersBrigade 9 months ago
No multicam patern yet :( well mi saiga have to wait a bit more then.
egamir 10 months ago
ups just droped of my digital camo dip kit just the other day , im getting ready to dip my remington sps stock i think it will work good , what do you think.
MrMar21457 10 months ago
i want to this to my r/c car's body
nokia26300 10 months ago
love the light switch where is it ehehehehehehehehehe
17hmr243 10 months ago
OMFG !
XzAnToZ 10 months ago
So... Could you send me some of that in the mail??? haha... I wanna camoflauge my dog! That would b sooo... funny. I loved that website for the zebra print! Thanks for being so AWESOME!
MegaDoggy90 11 months ago
aye so how wold the dip kit work on some rims would it work or would it chip hella easy im about to dip my mudden rims
bigpimpen64 11 months ago
This has been flagged as spam show
Dear Friend [a];
I wonder if this stuff [ATLANTA HYDRO] and found here in Brazil.
If they succeed, they will tell us where and how to buy.
Paintings Perzonalizadas work with and were delighted with this mode of work.
Sera that we would be pioneers in this art in Brazil.
No but be with God.
Aquardamos a response is possible if the Email:
Caks_rj@hotmail.com
Gogoboyrio1 11 months ago
This has been flagged as spam show
Dear Friend [a];
I wonder if this stuff [ATLANTA HYDRO] and found here in Brazil.
If they succeed, they will tell us where and how to buy.
Paintings Perzonalizadas work with and were delighted with this mode of work.
Sera that we would be pioneers in this art in Brazil.
No but be with God.
Aquardamos a response is possible if the Email:
Caks_rj@hotmail.com
Gogoboyrio1 11 months ago
This is just like water marbling for fingernails. Awesome.
xXxSanahxXx 11 months ago
wow you even did your hat and curtains!
chekkerachou 11 months ago 2
Hey do they have an a-tacs camo pattern
ArmedCivilian556 11 months ago
@ArmedCivilian556 check their website, they are always updating the patterns
bowhunter4e 11 months ago
I love it. Great instructional video. Very helpful. does it work in car dashboards too?
Thanks
bonggorospe 8 months ago
hey question can you clear coat that after its done..?
MrZiggy1979 1 year ago
change pattern
noobtuber1983 1 year ago
lol once you get going you cant stop, could imagine everything in your house being dipped. DIY are really fun and cheap too.
vash241987 1 year ago
how did you hydrograph your curtains?
rippingyarns 1 year ago
Looks great! When I spray my activator the film turns into a type of jelly not liquid. Please help!
retroxb 1 year ago
@retroxb
I'm not into dipping yet, but i did read a lot about it, so it could be several things that can go wrong like:
to cold water, not enough activator, or even the wrong side of the film on the water.
Just ad a little water on both sides on a corner of the film. the side that is getting sticky is the side that should contact the water, so face down while the other dry side is the side where you spray the activator on.
3DPeter 1 year ago
Looks great! When I spray my activator the film turns into a type of jelly not liquid. Please help!
retroxb 1 year ago
Wow, men and women are exactly the same. For the most serious nail art girly girl she would have a cup of water and put drops of nail polish until she had a sheet of color floating on the top of the water and then you put your nail slowly on top at an angle and then your nail is covered in the design! It is really weird that we are so similar.
23alexdiaz 1 year ago
This has been flagged as spam show
This is a great video series but what do you do if it gets messed up a video to help fix mistakes would be great
cfaulknor1 1 year ago
This is a great video series but what do you do if it gets messed up a vid to help fix mistakes would be great
cfaulknor1 1 year ago
This is a great video series but what do you do if it gets messed up a vid to help fix mistakes would be awsome
cfaulknor1 1 year ago
This has been flagged as spam show
I'm in Argentina. My question. To ask or look. Exact name of the lamina (who distribute it.) That is the keeper (name) and that other elements are used. VERY GOOD VIDEO. Of course I appreciate the information. Greetings from Buenos Aires-Arg.
roberto9un24 1 year ago
This has been flagged as spam show
I'm in Argentina. My question. To ask or look. Exact name of the lamina (who distribute it.) That is the keeper (name) and that other elements are used. VERY GOOD VIDEO. Of course I appreciate the information. Greetings from Buenos Aires-Arg.
roberto9un24 1 year ago
were you buy that plastic???
gera438 1 year ago
So what do you do if you mess up or your not satisfied with the way your product turns out? Is there a way of starting over or doyou just redip it? What about normal wear? what do you do when it starts wearing off?
langdontd 1 year ago
@langdontd I think that you can sand it off depending on what material you stuck it to in the first place but there are no do overs...sucks! But I think this whole thing is cool so maybe try a mini kit and go from there. Oh and I think that you can buy a type of seal in can of spray paint that is clear obviously and you can have it be in a high or and semi gloss, or a matte finish to protect the color.
23alexdiaz 1 year ago
WOW!!!! This product is awsome !!!!! always wondered how they did it ,now i know.
I want to order this but i hope they can ship it to Cyprus . I got 5 guns that need doing .(including an antique shotgun tha belongs to my dad :0) ). Great vid bro . ( my mind is now like ok so what else can i camo now aahhhhhh!!!!!!!
llonewolff 1 year ago
camouflage yourself!
you need camo suit no more
feel the mother natural!
ryantong1988 1 year ago
Car keys, knife scales, bic lighters, pistol grips, wrangler body panels, shift knobs?
BuffaloWarrior7 1 year ago
Hey come to think of it - since you do such an awesome job how about I send you my kit and items and you can do them for me! heheheh I mean hey, if you ran out of things to dip! I'm just thinking of you man, thats all! Thanks again for the great vids!
trippledigitss 1 year ago
@trippledigitss lol i was in a dipping coma
bowhunter4e 1 year ago
@bowhunter4e
Great job. Btw, do you know what the activator is made off? Because some dudes offer the formula for 25 dollar on ebay, so that you make your own activator. I saw many other movies were the yhave a proffesional tank, so i checked out what those tanks cost, and they are 5 up to 10k!! Now that is madness, because a cheap tupperware box works just as fine. Last question, i want to buy foil from china. So does all the foil come from there, or is there any brand that is recomended?
3DPeter 1 year ago
Dude - that is so freaking awesome!! My kit just came today but there were no instructions included with it. But I think you covered everything in your vid well enough that I am confident I can figure it out. One thing I didnt see in the vid, once you dip it and it dries for a while, then you spray it with the clear coat right? I am going to test it on a few items then do my son's cheap little Bushnell scope b4 I do my own. I also want to dip the barrel of my Savage Edge 243, any advice on that?
trippledigitss 1 year ago
@trippledigitss lol thanks man, I am really surprised that there were no instructions...in a nutshell, you dip the item (make sure the water is WARM..a lot of guys are having this problem, the water is too cold and the film just melts away) after you dip the piece, you want to immediately wash the slime off. after all the slime is gone you let the piece air dry (i would say overnight) then you clear coat it. Make sure you do a few test runs first...get comfortable with the process..good luck!
bowhunter4e 1 year ago
i'm going to do my shoes
crazycrackergabe 1 year ago
hey wanted to know a name of the self etiching primer for a shotgun barrel or really the whole gun in general
2010maggiemay 1 year ago
@2010maggiemay I don't know of any brand names, but if you go to an auto parts store, they carry the primer
bowhunter4e 1 year ago
will it stuck on a .308 barrel or wear off quickly?
Awesome stuff man. Great vid.
Ps: did you ever found your wife back ;o)??
robin6512 1 year ago
The pistol case looked like there were bubbles and wrinkles in it when you took it out, do they go away when it dries out?
Thanks
prolificglass 1 year ago
@prolificglass I think it's just the water. I'm guessing if there were air bubbles the lack of water contact causes problems with the change from film to liquid paint rather than leaving visual anomalies in the camo.
Draxanoth 1 year ago
you know, apparently I didn't talk enough....i get about 15 emails a day asking me questions about the kit...oh well, you win some-you lose some.
bowhunter4e 1 year ago
@bowhunter4e
Can you tell me how hard wearing the material is? i want to put it on my Sniper stock, and I'm concerned it will simply scratch off after a few days out in the woods
phantomshooter01 1 year ago
@phantomshooter01 if you're throwing your stock in a wood chipper, yes it will chip and crack...the film is tough stuff, you need to protect it with clear coat...as with anything, it's not indestructible, but its not a coating of flower petals either lol
bowhunter4e 1 year ago
@bowhunter4e ... I am gonna be in deeeeeeeep trouble... there is so much stuff in my home I can camouflage ... You sir, are an enabler!!! ;) ... thanks for the great tutorial and links. Looks like I have a new hobby! If you are going to do an AR rifle, would you just do the furniture or would you do the whole rifle (upper and lower receivers as well?)
DrFrige 1 year ago
gooooooooooood video!!!!! buuttttt you talk tooo muchhh
yupyup39 1 year ago
How easy is it to do a deer skull, does the camo dip wrap around the skull completely in 1 dip, or does it take several? How does it do in the cracks and crevices?
tame444 1 year ago
@tame444 I've never dipped a skull, so I really can't speak as far as experience...I'm sure that if you contact the manufacturer they could give you some good tips. Good luck and thanks for watching!
bowhunter4e 1 year ago
do u think u could make some diy or how to or tips/hints vids regarding shotgun deer hunting?
tatoo190 1 year ago
try a hand gun lol
shanepify 1 year ago
This is the same thing as Duracoat right? if it is this stuff is amazing. I have a woodsball paintball gun that is fully camo coated. It is some of the toughest stuff. The gun has been thrown aroun,landed on by me against stickand rocks and it still looks good. The only downside is it was so damn expensive to have a shop do it.($300) Just for i would say maybe 1.5-2 squ.ft. I am going to buy one of these kits ASAP. Thanks for informing people on this kit.
southernboy125 1 year ago
This is witchcraft!!!
Garuda1337 1 year ago 12
THats cool! I'm gonna dip myself in that lol
estrellanortena14 1 year ago 2
you can camo all your arrows!
MaverickX87X 1 year ago
pretty cool
treos17 1 year ago
dude that is awsome i am getin some and i love the end
CoreyTheWolfTWC 1 year ago
dude that is awsome i am getin some
CoreyTheWolfTWC 1 year ago
dude that is awsome how much does it cost and where can i get some
CoreyTheWolfTWC 1 year ago
@CoreyTheWolfTWC he says it at the end of the video... its 100.00
squirrelkiller247 1 year ago
terrible !!!
bigtoto13marseille 1 year ago
@bigtoto13marseille I'm hoping that "terrible" means something else in French...
bowhunter4e 1 year ago 5
I am hopelessly addicted to making everything camo....I wanna do my truck!!! That stuff is sick!
camoismycolor 1 year ago
wondering about being durable...wanting to do my motorcycle fenders and tank....
ayres390 1 year ago
GREAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
tysrides 1 year ago
will it work on all material. wood,metal. i have a synthetic 870 and i have been wanting to do my slug barrel and stock and forearm. i was just wanting to know if i could do that. i was going to send it in but i sent i knife in and they charged me 45 bucks to do it, so i only imagine how much the gun parts would be.
hawkdlb06 1 year ago
all what i can say is thank you, really thaaaaaaaaaaaaaaaaaaaaanks.
SalehMagrabi 1 year ago
I try homemade in my Tippmann A5, congratulations this video is the best!!!
calcabrina 1 year ago
tis is cool but one thing how can i get a dipkit for carbonfiber i did not sit the web sites
mytjoemaine 1 year ago
What were you sayin about a different camo... Like I would like to have my guns desert camo, can I get it at the same place?
gunmetal0209 1 year ago
salve vorrei dipingere il mio fucile, e vorrei sapere dove acquistare l'occorrente per camuffare il mio fucile, potresti dirmi gentilmente dove acquistare l'occorrente?....grazie
MrSkullMasters 1 year ago
This has been flagged as spam show
hello what must be the water temperature ,You must use a special primer or not ?
pawlotrzebinia 1 year ago
Comment removed
pawlotrzebinia 1 year ago
Comment removed
pawlotrzebinia 1 year ago
Comment removed
pawlotrzebinia 1 year ago
Comment removed
pawlotrzebinia 1 year ago
Comment removed
pawlotrzebinia 1 year ago
Comment removed
pawlotrzebinia 1 year ago
Cover everything in your living room with that camo, dress up in matching outfit, go lay on the couch and wait for your wife to come home XD
Hyshinara 1 year ago
Very nice set of videos. Thanks for the wonderful and fully explanatory steps to follow for the DIY-selfer. Camo is not my thing but you have acquired great technique using the dip kit. I will be using a wood grain kit in the next couple weeks for a project of my own. 2 thumbs up!
Customizurs 1 year ago
I am wanting to hydrograph a sniper rifle project using 'The Ultimate Sniper' stock from Choate Tools (viewable on their website) but this particular stock has a very large thumbhole cut out (almost like a 'skeleton' stock) and I am concerned that the film will not 'wrap around' to the inside of the thumbhole cutout to camouflage the inside (just as the film did not wrap around the picture frame to the backside) How well will the film wrap around flat areas? Can you re-dip bare spots later?
robbie8600 1 year ago
@robbie8600 I would recommend that you dip the stock in 2 parts...that will ensure good coverage. Mask off one half of the stock (right down the middle) then dip that side and let it dry, then mask of the area that you just dipped (make sure it's dry- i would let it sit overnight) and then dip that side. If you run into spots, use a magic marker or airbrush to blend it all in- if you mask off and re-dip spots, it will look jacked up, the marker and/or airbrush blend it a lot better.
bowhunter4e 1 year ago
This has been flagged as spam show
@bowhunter4e hello what must be the water temperature ,You must use a special primer or not ?
pawlotrzebinia 1 year ago
Freakin sweet!!!
TheLafayettekajun 1 year ago
How well does it work with arrows?
countryhunter11 1 year ago
do you have to be a specific age to buy the kit?
bipnip123 1 year ago
@UltmtSniper Scuffing looks "tacticool" on a painted AR anyway!
Keith02 1 year ago
where do you buy this stuff
DummDumm545 1 year ago
@UltmtSniper it's the same exact stuff that the professionals use...if you have a gun or bow that's camo, odds are it was hydrographed. once you let the dip dry, then you clear coat it...it's not bullet proof lol, but it holds up awesome.
bowhunter4e 3 months ago
bowhunter4e 1 year ago
Can you do metal? I'm looking to do an AR15
S0C0MIII 1 year ago
@S0C0MIII you can do metal, but you need to get a self-etching primer...i would suggest calling the manufacturer and get a recommendation on a specific brand.
bowhunter4e 1 year ago
how do you think it would do on a bow? with the holes and designs on some risers, etc. very good vid by the way.
kdcampbell20 1 year ago
hey does it has to be like cold or hot in the room? I heard that there has to be some kind of temperature and air specification to store the film and make that hydrography is that true?
remointeriapl 1 year ago
i would like to know what is your activator and where can be bought?
darialavin 1 year ago
@darialavin as i said below, we cant get it in the u.k as a kit, research shows the activator is simply Xylene in an aerosol !
modernwarfareon360 1 year ago
brilliant kit, just what i was looking for, UNFORTUNATLY THE SUPPLIER WILL NOT SHIP THIS KIT TO THE UNITED KINGDOM !!!
over here we cant buy this sort of thing, only choice is to pay a firm £250 to dip your air rifle !
i really wanted to try & do this myself and at £66 thie kit is very good value.
what a crying shame.
modernwarfareon360 1 year ago
put some film in the bath tube and lie down on it, u would have an amayzing tattoo ;p
Booogeym4n 1 year ago
That's pretty cool, thanks for the tutorial.
Rik7366 1 year ago
This has been flagged as spam show
Good day,
We are in South Africa and have been trying the process from some time. Small bubbles form after we have dipped the product. It seems as if we are using the wrong base coat, we cant seem to get the answers from our chinese supplier. Can you please point us in the wright direction?
Regards
Johan
jpprinsloo@gmail.com
snowflake00710 1 year ago
how many time between preparation and dipping ? Thanks !
sentupartu 1 year ago
who is your camera man?
josephvelder 1 year ago
@josephvelder sometimes my cousing Cory is my camera man...other times it's just me
bowhunter4e 1 year ago