You absolutely misunderstood, I said that this LED installation deserves this (GM) Saab. It's a taste fault, you should buy some original headlights LED instead. Much better for Day Lights !
The blinking is a light check for all of the new GM cars I think started in 2003... and why didn't you just go through your fender so you didn't have to drill through the firewall? Car looks great though love what you've done with it, straight murdered out!
People stop hating on this Saab. Its one of the sexiest Ive ever seen...actually it is the sexiest and I just got a black 04 Aero. Cant wait for it to look like yours dude. Great Vid!!
People stop hating on this Saab. Its one of the sexiest Ive evr seen...actually is the sexiest and I just got black 04 Aero. Cant wait for it to look like yours dude. Great Vid!!!
how do you get through the firewall? did you have to take off the dash? i'm installing LEDs in my cupholders and i need to get through the firewall. i have a 2002 Saturn L300
@01jordanfirst your more then likely going to drill through it or if you can fit the wires through the steering column opening. And then run the wires how you like from there.
@Aah1111 instead of going through the firewall i ran the wires under the carpet to the center console and tapped the cigarette lighter for power. but i have another question (sorry lol), if i were to install LED strips and connect them with my parking/turn signal lights, would the LED strip flash when i put on my signal?
city lights, as in daytime running lights? and can you explain why you took those out again? was it because you were getting flashing? sorry for so many questions lol.
@01jordanfirst No the city lights are just the little bulbs. I took them out because it looks a lot better with them out. DRL you have to get turned off at your dealer or if you know someone with Tech 2.
your saab looks so clean... I have the same year, same color except mine is sitting on 19" AT wheel... I would like to know where you got the LED, cause it looks really nice... Please make more video or your SAAB, to keep us updated on your ride...
well now i have the front grill all black, the orange reflectors black, and painted the trim all around with a plastic paint so it always looks shinny. Got the rims powder coated, 5% tint in the back and 20% in the front, and i have BSR intake and VTuners Stage 0. If you want pictures send me message with your email.
your going to have to go to your dealer and ask your tech to do it. My dealer, before i got to know my tech, said they wouldn't do it because of safety. Yet i got a little aggressive and stated that I'm tired of buying new bulbs cause they keep going out. And after that it was cake. It's the same process for wither HIDs or regular lights. I had them done on my new one right away cause i didn't want my HIDs on all the time.
if your talking about the little seals that sit on the back of the light???? Because if so its almost impossible to get to without talking out the light . Those lights sit far in the light and with little room underneath the hood, you can't get a room to work. But if your talking about the lens that covers the light that seems it would break the seal to the light leading to problems down the road. So i'm not quite sure i understand what your saying
idk if it's different after 2003.. but i'm able to remove, change, and put the city lights (the tiny wedge bulbs) in 5 minutes flat without having to remove the bumper.
there's also no seal to break, i just remove the rubber flap which exposes both the H7 and the city lights, at which point i can either remove the H7 bulb and then the city, or just bypass the H7 bulb with a little finger movement and remove the city light.
just an fyi, no need to remove the bumper to get the city lights out. i've changed mine a good 10 times. just remove the headlight cover, and then you can tug on the two wires (lightly) to pull the city light out. it's easier putting it back in, just push it into the hole (looking from the front) and applying a little pressure. it'll save you a good half hour.
@bmrip16 does the witch ride a small or big broom stick?
Jx1x3 3 months ago
on my 04 it doesnt have a yellow with green wire, can u tell me witch one it is? thanks
bmrip16 5 months ago
Bitch Make A Better Video...Its Too Damn Dark To See Anything.
TheDylinPrestly 9 months ago
HIV fogs haha nice wording bro, great saab btw, I've got a '99 9-3 SE, Griffin Up!
MrMoriardy 9 months ago
What intake do you have on it?
Ameriking85 10 months ago
Great looking car. Any way to get power without drilling through the firewall? That is currently my main concern.
Pfuncle4 11 months ago
Car is for sale $12,400 FIRM 70,000 miles
Wil post a video up of the car once the weather clears up out here and I can clean it again.
Aah1111 11 months ago
You absolutely misunderstood, I said that this LED installation deserves this (GM) Saab. It's a taste fault, you should buy some original headlights LED instead. Much better for Day Lights !
lepivert 1 year ago
Hey I am also curious as to what wattage and color your fog HID's are? Thanks.
Ameriking85 1 year ago
Nice
kba330 1 year ago
The blinking is a light check for all of the new GM cars I think started in 2003... and why didn't you just go through your fender so you didn't have to drill through the firewall? Car looks great though love what you've done with it, straight murdered out!
getinblazd 1 year ago
Beautiful. I love this car.
Marter713 1 year ago
Good looking 9.3. I own one as well (2005 Areo). I must say that is the cleanest one I've seen to date. Nicely done.
abeycr 1 year ago
im a american muscle car guy but this saab is sexy as hell. i slept on this one.
jonrawl58 1 year ago
did you do anything thing to the clear part of your tails? almost looks tinted. looks really good
polonia10 1 year ago
Did you disable your running? If you did! Please share the knowlegde how to? Great Saab
cololardo 1 year ago
@Aah1111 Even better then that? Is that even possible? haha
Ameriking85 1 year ago
This has been flagged as spam show
People stop hating on this Saab. Its one of the sexiest Ive ever seen...actually it is the sexiest and I just got a black 04 Aero. Cant wait for it to look like yours dude. Great Vid!!
Ameriking85 1 year ago
People stop hating on this Saab. Its one of the sexiest Ive evr seen...actually is the sexiest and I just got black 04 Aero. Cant wait for it to look like yours dude. Great Vid!!!
Ameriking85 1 year ago 4
@Ameriking85 Thanks man. Hopefully this spring I can get a video up and show it now. If you like it here then you'll love it now.
Aah1111 1 year ago
@Aah1111 Alright dude, cant wait for the new vid.
Ameriking85 1 year ago
@jedebiri what's up
Aah1111 1 year ago
This comment has received too many negative votes show
It' so ugly, poor Saab !
lepivert 1 year ago
@lepivert
sorry you feel that way.
Aah1111 1 year ago 4
@lepivert sorry for the fool language but hey
your mom is ugly, poor your mom!
regards
ERCuK 1 year ago
how do you get through the firewall? did you have to take off the dash? i'm installing LEDs in my cupholders and i need to get through the firewall. i have a 2002 Saturn L300
01jordanfirst 1 year ago
@01jordanfirst your more then likely going to drill through it or if you can fit the wires through the steering column opening. And then run the wires how you like from there.
Aah1111 1 year ago
@Aah1111 instead of going through the firewall i ran the wires under the carpet to the center console and tapped the cigarette lighter for power. but i have another question (sorry lol), if i were to install LED strips and connect them with my parking/turn signal lights, would the LED strip flash when i put on my signal?
01jordanfirst 1 year ago
city lights, as in daytime running lights? and can you explain why you took those out again? was it because you were getting flashing? sorry for so many questions lol.
01jordanfirst 1 year ago
@01jordanfirst No the city lights are just the little bulbs. I took them out because it looks a lot better with them out. DRL you have to get turned off at your dealer or if you know someone with Tech 2.
Aah1111 1 year ago
ever been pulled over for no front plate or the tint? lol
WHOO222 1 year ago
@WHOO222 rarely
Aah1111 1 year ago
you on TSL?
Bizkit9d8 1 year ago
@Bizkit9d8 I'm on SaabCentral. Name is BlackedOutSaab
Aah1111 1 year ago
is your trim/side skirt painted with a black gloss paint?
18fireflies18 1 year ago
@18fireflies18 i painted all the plastic pieces with a black gloss spray paint. Did a great job and making it look shiny all the time
Aah1111 1 year ago
Dont sell tht car, ITS A SEXY BITCH!
sladeD8 1 year ago
thts a sexy saab
FrozenViews 2 years ago
great car... what forum you on. Im on Saabcentral
jetsandmets93 2 years ago
same forum. BlackedOutSaab is my name
Aah1111 2 years ago
where under elk parts did you get you leds
xxgriff09xx 2 years ago
nice job my friend.i have the same car but its 2007 model.i love it
saab93sportsedan 2 years ago
your saab looks so clean... I have the same year, same color except mine is sitting on 19" AT wheel... I would like to know where you got the LED, cause it looks really nice... Please make more video or your SAAB, to keep us updated on your ride...
cololardo 2 years ago
how much u want for ur car!! haha
i have a saab 9-5 and im doing tons of work on it but it looks no where as goos as yours
good job man
billabongos28 2 years ago
car is always for sale if your price is right haha I do want to get a turbo X so i am willing to part with it
Aah1111 2 years ago
Your Saab looks great. Do you mind going over what you have done to it? I would love to do something similar to mine.
tgadd414 2 years ago
well now i have the front grill all black, the orange reflectors black, and painted the trim all around with a plastic paint so it always looks shinny. Got the rims powder coated, 5% tint in the back and 20% in the front, and i have BSR intake and VTuners Stage 0. If you want pictures send me message with your email.
Aah1111 2 years ago
Can you please redo this video in during the day. so i could see it better. I would love to do this to my saab!
patrickogiado 2 years ago
Hi! Which rims do you have on your 93? Thx
TWFNSC 2 years ago
Have the stock Aero rims with them powder coated. I got a good guy if anyone is near IL and wants them done.
Aah1111 2 years ago
@Aah1111 I have 07 Aero, want to take you up on that powder coating info. I live in NW Chicago bubs.
ytima1977 2 years ago
how do you disable your daytime running lights?
I have an 06 2.0T without HIDs but im guessing its the same.
warcat16 2 years ago
your going to have to go to your dealer and ask your tech to do it. My dealer, before i got to know my tech, said they wouldn't do it because of safety. Yet i got a little aggressive and stated that I'm tired of buying new bulbs cause they keep going out. And after that it was cake. It's the same process for wither HIDs or regular lights. I had them done on my new one right away cause i didn't want my HIDs on all the time.
Aah1111 2 years ago
if your talking about the little seals that sit on the back of the light???? Because if so its almost impossible to get to without talking out the light . Those lights sit far in the light and with little room underneath the hood, you can't get a room to work. But if your talking about the lens that covers the light that seems it would break the seal to the light leading to problems down the road. So i'm not quite sure i understand what your saying
Aah1111 2 years ago
idk if it's different after 2003.. but i'm able to remove, change, and put the city lights (the tiny wedge bulbs) in 5 minutes flat without having to remove the bumper.
there's also no seal to break, i just remove the rubber flap which exposes both the H7 and the city lights, at which point i can either remove the H7 bulb and then the city, or just bypass the H7 bulb with a little finger movement and remove the city light.
dirbyh 2 years ago
just an fyi, no need to remove the bumper to get the city lights out. i've changed mine a good 10 times. just remove the headlight cover, and then you can tug on the two wires (lightly) to pull the city light out. it's easier putting it back in, just push it into the hole (looking from the front) and applying a little pressure. it'll save you a good half hour.
dirbyh 2 years ago
can you post a video detailing how to install the hid fogs?
borderwave2 2 years ago