SEG Material progress update

[valdezmj10]

what type of copper is it using in the outer ring? or is it a copper winding PLZ REPLY

[dan110024]

I want to believe this. I want this to work. Unfortunately I really don't think it's ever going to happen. If it is something that has been in practice in UFO's, they're obviously doing something that we are lacking and/or do not know about. Here's not getting your hopes up!

[MrAwsome514]

Consideri9ng Searl claims to have been using neodymium magnets in the SEG as early as the 1950's I would have to say he must be really good at getting his hands on specialized materials... Considering the neodymium/iron/boron compound that neodymium magnets are made from was not invented untill 1982.

[despinapjr]

Free energy is finaly here!But a few ppl make too many billions from our energy needs to let this technology be known,Check this free energy magnet motor at LT-MAGNET-MOTORdotCOM ,take part in the revolution!

[BeamshipFrankenstein]

I can personally attest to the value of the Searl SEG device, for I utilize it almost everyday in my work. Place (embed) one Searl branded SEG at the base of the subject's brainstem, and your subject (creature) will respond to verbal or telepathic commands with a 156% greater efficiency than generic branded SEG devices. No sluggishness, no monstrous attempts to strangle you or your assistants; the re-animated corpse will function as advertised. Searl deserves much credit for his brilliant work.

[richiefrost]

this is very kewl. :) I will be by alot more for updates. tasty to the thoughts. nice !

[HorseJouster]

Where is the March 2008 announcement? I am a paid subscriber to searls site and cant even find it there.. ??

[areyummy]

negative arn't they, get this device sorted, we all need one ;0)

[grateful13356]

I think they have all run off with the money sponsored. I mean c'mon. All Dr. Terry Moore's videos were posted over 2 years ago. No updates. Hello. Alarm bells ringing. And why is it, that only ever one plate and rollers with electro magnets is ever filmed. They have had enough money to make one plate with rollers. Well, why not a second. If you ask me, those electrmagnets round the perimeter are producing the propulsion wave effect. C'mon then, prove me wrong with a video, if you can?

[TheVapouriser]

I think you are probably right !!!!!

[stikowsky]

Q: where does it get its energy?

[lumpwump]

from a plug in a wall

[greenfields47]

Will buy Searl electric generator. When will it hit the open marker.

[hossoneninesixtwo]

yep - but don't hold your breath - 60 years and counting..

[iurak6868]

don't be gullible people!

[renderrob]

Why are the videos on swallow command not available on youtube? I would like to download and archive them for future reference.

[Beamshipcaptain]

Because Professor Searl has had it with all the idiots on Youtube. However, new tests of the working system have been posted on YouTube.

[renderrob]

if you would be willing to tell us how the magnetic material is magnetized, it could very well help people in other areas, like TPU research. Open Source it!!!!!!!!

[zeropointprophet]

the minute to tell someone the "know how secerit" your finished!!

[Beamshipcaptain]

It is magnetised with a conventional DC-coil, with ONE complete turn of AC wrapped around that. The result is tiny-pin-prics of NS poles on plates and runners, that makes the field on plates and runners resemble wagon-wheel spokes. Parameters from the Law of The Squares, and DREAM ONE. It always comes back to the oddly recurring dreams Prof Searl had as a young boy. The interpretation of those dreams was first built in 1946.

[DrTerryMoore]

Hi all viewers, as the disclosure conference approaches, watch out for a large number of clips which are already up on You Tube from members of the team and those involved with the work. In particular search for AntonyBurr, masterfulninja and UFOhowto. Much more to come!

[Beamshipcaptain]

Obama has jsut been elected; he has no ties to the OIL industry, and plans to deploy ALTERNATIVE ENRGY devices and systems, to save our economy and our planet. President-elect Obama can be counted on to promote and deploy clean-cheap energy devices and systems, instead of increasingly expensive and scarce dirty-energy!

[jgposner]

Nobody gets elected unless the Kingmakers approve. I wouldn't trust Obama either.

[b101aa2]

a few days before obama made his announcement he was going to run, he became a member of the cfr. so, totally 110% pwned. mccain, clinton, bush sr, cheney, rice, powell, etc etc are all members.

[UTubeFreeMind]

obama plans for free energy like reality of christmas 2k8 withdrawal from the illegal iraq war. Same probability for george bush to achieve iq above 50. Obama has oil ties everywhere, CFR and the bush family direct with the bin laden family. shame people are tooo dumb to put 2 and 2 together on their almost incestuous relationship, even moreso on the day of 911, when they were working together, daddy bush and bin ladens bro. Duhh America!!. More like BeamMeUpScooty rather than beamshipcaptain.

[powerkitemad]

Dr Terry Moore, When is the disclosure conference? 3 months on from your last comment on this video and ......Nothing!

[DrTerryMoore]

Hi all viewers, If you go to web site swallowcommand (dot) com you can find out more about the technology. You can also hear an interview between the Professor and William Alek - The Progressive Technology Hour of the 19th July 2008 and see a repeat of Golden Age Technology broadcast on satellite which was screened 1st August 2008.

[DrTerryMoore]

Statement dated 31st March 2008. For those of you who have not seen the latest documents on swallow command dot com, work in Thailand continues at a rapid rate but is being held up by the delivery of components for the purpose made magnetizers. Until this equipment is completed, the components cannot be impregnated with the AC and DC magnetic fields. Watch swallowcommand dot com for more updates.

[Beamshipcaptain]

We shall reveal it, at the appointed time and place. The 30-year wait is nearly over. Another nail in the coffin of the Artificial Energy Crisis, and economic and spiritual-slavery.

[jgposner]

Hi, I hope you have all your research and working models backed up in multiple locations with multiple trusted people. Things like this tend to dissapear.

[MrBlueSky36863]

@jgposner Yea I agree, I presume they do. I hope they do. Dr. Searl knows from experience.

[zenzenzenzen321]

have investigate cavity structural effect i seen this russian entomologist fly with a wooden platform

[DrTerryMoore]

It is with regret that comments will now have to be approved before they are posted on this clip. This is as a result of an increased number of insulting and mindless remarks which have had to be removed on a daily basis. Professor John Searl has confirmed that a major announcement may be expected some time in March 2008. For updates on the technology, see swallowcommand dot com

[sAME2U22]

Here we are into the new year. HAPPY NEW YEAR to all SEGers! Where do we stand? Have there been any new developments, and if so, where can we go to get the info. Been to Swallow Command but nothing new there.

Thanks.

[DrTerryMoore]

Hi sAME2U22, John has confirmed all is set for the March 2008 deadline. Watch swallowcommand dot com, searleffect dot com and searlsolution dot com for updates.

[Beamshipcaptain]

Swallowcomand Manned Space Division, Pennsylvania, USA, is ACTIVE, and construction has commenced on the three-meter IGV, as per professor Searl's precise instructions. All polystyrene, with 64-fully articulated Radio-controlled flight-cells, and eight retractable pneumatic landing legs. The future is NOW.

[sAME2U22]

Hey, Beamshipcaptain.  How about a YouTube clip on the IVG being developed?

[Beamshipcaptain]

Coming up. I'm spnding all my spare-time on the spacecraft (IGV).

[Beamshipcaptain]

After magnetisation, the SEG plates and runners act like electrets. The use of Nylon-66 Negative, or Teflon amplifies the electret-effect.

[robmguy]

I grew up fascinated with magnets. I came up with this very idea before hearing about it; I just hope you are able to complete it for the good of mankind. The government and the people with the money will certainly rage against this. I wish there was something I could do.

[DrTerryMoore]

Hi robmguy, thank you for your comments. All you and others need do at this point is watch the clips which are to recommence shortly, once our engineer has settled at our new facility in Thailand. Keep up to date with the news on swallowcommand dot com and searlsolution dot com and get ready to put your name on the reservation list once the SEG is in production.

[lewy0701]

bad presentation.. dull as hell

[DrTerryMoore]

Hi lewy0701, this is a factual presentation, not a comedy sketch.

[Beamshipcaptain]

Good one, Dr. Terry.

[lewy0701]

i was saying he has a bad presentation skill. mayb you too fall in the same category..

[sAME2U22]

lewy0701.

If you were as skilled at technical analysis as you claim to be as a talent critic you just might be of some use--somewhere.

[7luxL]

Quote:

"At a seminar, Middle sex University, London on March 10, 1996, John took one of the rollers and attached a oscilloscope to it. The result was a spike or peak on the oscilloscope screen. The roller showed a negative potential, that is, a release of electrons is evidence of charge. Also it kept on pulsing, meaning it draws power from the surrounding air"

I would like to see this!

[Beamshipcaptain]

That is ffrom the Barrett Report, and only occurs in the Rare-Earth cored SEG.

[7luxL]

Beamshipcaptain, as I said before Neodymium is at the core of the current SEG and Neodymium is a Rare-earth.

Also all Segs must have an electron flow, Electricity is a flow of electrons, if there is no electron flow then there is no electricity......are you saying the SEG dose not produce electricity?

[Beamshipcaptain]

The plates and runners pruduce electricity w/o any movement. Read the BARRETT REPORT. If one places probes on the inner Neodymium-surface of a plate, or runner-module, and the outer copper or aluminium-surface, you will get anywhere from 4 to 15-Volts DC at a helthy milliAmperage. This is more than enough to sustain rotaion on ASEG without any input-power if magnetisation is correct. Because of the charge, the SEG, once started, can NEVER stop.

[Beamshipcaptain]

SEG plates and runners are so electrically active, even stationary, they attract bits of plastic, dust, paper, wood, cloting, etc. Searl found after working around generators, or the flying models powered by the SEG, he often had a COBWEB sensation on his skin, and his lothes clung to him, and also the bed-linen, accompanied by many sparks.

[7luxL]

I see in your other video that you have already constructed one ring of the SEG and several rollers.

Can you show us the reading from a volt meter when connected between the innermost ring and the outermost copper ring, John said that there is a continuous DC voltage produced even when stationary. I would like to see that!

[Beamshipcaptain]

That is only in the rare-earth SEG, not the mockup, which was built for COFE II a year ago, which I attended, and poked at the SEG-mockup with my own fingers, and learned first-hand about the technology from the team involved, including Mr. John Thomas, and Dr. Fernando Morris.

[7luxL]

First of all Neodymium is a rare earth ;-)

Second copper has a cubic crystal

Iron has a cubic crystal

Nylon 66 has a branched chain structure and the only element in the seg which has a hex crystal structure is Neodymium......looks like none of you guys have any knowledge of Science.

Thirdly all the segs must emit electrons from their centre otherwise they would not be generating electricity.

[DrTerryMoore]

Hi 7luxL, knowledge of existing science restricts the evolution of evolving science.

[7luxL]

No a knowledge of Science is not what halts progress, its a closed mind which halts progress. A knowledge of Science can only help. There is only one reality, there is only one truth, there is only one Science!

Still off topic I think, my request was simply for you to connect a volt meter to the inner positive ring and the outer negative copper ring and show us the reading on the volt meter.

[7luxL]

Still don't understand, can you please be more specific?

[DrTerryMoore]

Hi 7luxL, to be more specific would require a very in depth explanation of the physics involved. Suffice it to say, selection of materials is dependant on the physical properties of the elements, compounds and alloys used in the new prototype which maximise electron flow whilst retaining the integrity and long term stability of the individual materials and their properties.

[NoMoreFights1]

attraction or repulsion - in what ever configuration - its no use!

[NoMoreFights1]

yeah - i tried Shielding to reduce the attraction, but no use! It looks impossible using shielding !

[NoMoreFights1]

Looks like the Government is ready to allow you people to invent things !

[DrTerryMoore]

Hi NoMoreFights1, Governments of the world appear to have enough on their minds at the moment. Some are more successful than others at Governing, a few are making progress at solving Sustainable Survival for us all.

[NoMoreFights1]

You could have used Permanent magnets, Shielded one side with one of those shelding materials, then permenant magnets inside would get repeled by outer magnets. Now the inner magnet is moving forward. Since the outer magnet is shielded it cant get repeled - but as soon as it reaches the other non shielded side it again gets repelled forward! and you have perpetual motion! Correct ?

[DrTerryMoore]

Hi NoMoreFights, not having tried this configuration, we are unable to comment on the result.

[Beamshipcaptain]

Stick with Deream ONE and Dream TWO and law of the squares. Anything else will fail to funtion. You can only get the SEG to work if you obey the precise instructions given in the TWO DREAMS!!! IGV-design also came from a LUCID DREAM. 64-struts. Hopscotch. 8 SQUARED. Study the LAW OF THE SQUARES magic-squares matrices. Then you will understand the SEG.

[SEGxTruthxORxFiction]

Thanks "DrTerryMoore" - Why don't you answer right here ? or send some links ?

And you Block people and Delete posts of people who question you - why is that ?

[DrTerryMoore]

Hi SEGxTruthxORxFiction, the links are all shown in the comments for each video. Please carry out some research to enable you to make informed comments.

[xabhijitx]

It is just a normal motor - It has permenant magnets with Coils that rotate. The Elecro magnets around it create a rotating field, the "permenant magnets with coils" Start following this, which causes movement.

I have no idea why they have wound the Moving magnets with coils - i guess its for visual effects!

[DrTerryMoore]

Hi xabhijitx, please read the literature and web sites. This will enable you to understand what this technology is about.

[7luxL]

WhatI cant understand is how those materials were selected by John. As far as I know he has never stated how he knew what materials to use. He only stated that the weights of each material must be in accordance with the law of the squares. This however dose not explain his selection, was this also done using the squares and if so how?

[DrTerryMoore]

Hi 7luxL, selection of materials is dictated by the atomic structure of each material and its potential match for the parameters required to other materials used in the SEG. The Law of the Squares dictates selection of materials.

[Beamshipcaptain]

Read Chapter 1 of ANTIGRAVITY, the DREAM made reality, by John Thomas, and LAW OF THE SQUARES, BOOK-4. Must use elements on periodic-table with a 6-sided crystalline structure, need 4 elements for smooth-running SEG, need to balance magnetic attraction/repulsion, and centrufugal-forces, and electron-flux radially thru SEG.

[Beamshipcaptain]

EVERYTHING in the SEG, and what elements on Periodic-table - TWO dreams (STOP, THINK, ACT), (MAGIC-SQUARES). There is an excellent article in RAUM AND ZEIT. ANTIGRAVITY: THE DEAM MADE REALITY, by John Thomas, photos, newsclips. First, determine the size of volume you want filled with SEG: 3-Plates, 69-runners. Produces big- energy spinning (current never exceeds 1.5mA) and are a little dangerous because of tremendous forces a spinning 3-ring SEG generates. Min. 200-mph.

[Lehamic]

the SEG is interesting, but I feel fortunate that this guy was never my science teacher at school. What a sleeper.

[sAME2U22]

Who cares if he's a sleeper if he's got the goods!

[Drevtoobe]

"we should have a fully working SEG early next year".

10 I have a very strong feeling that it will be postponed until the year after that.

20 Goto 10

[DrTerryMoore]

Hi Drevtoobe, we intend to prove you wrong.

[flowerbower]

Hi Dr T. What do you think of the Youtube clip where James Randi makes fun of homeopathy; especially a dilution of 10 to the power of 1500?

[DrTerryMoore]

Hi flowerbower, as this is an off topic question I have responded to your You Tube mail box.

[Stewpend0us]

Could you tell us what each of the materials used in both the rollers and rings are? I've heard some of it randomly through the videos could you make it nice and clear what the materials are and what the differences between the rings and the rollers are? Also how many sections were the center magnetic pieces in before it was assembled? Thanks

[bitRAKE]

Ah, you are changing the size of center ring - excellent!

[excel60]

When do you expect this will be completed?

[DrTerryMoore]

Hi excel60, if we carry on in line with our current schedule, we should have a fully working SEG early next year. In the meantime, there will be some very important step by step progress reports which will prove at last that this science is real.

[Clarky006]

Really exciting, the first time I read about the technology was in a book written in the early 1990's called man and the energy dance, always captured my imagination, and to see it being demonstrated and behaving exactley how Mr Searle said is amazing. Good luck and Keep the updates coming : D

[DrTerryMoore]

Hi Clark006, thank you for your comments. This time the project is under John's control so we will succeed!

[SGiHunter]

Fascinating technology

Best of luck on the primary section build.

[DrTerryMoore]

Hi SGiHunter, keep watching...a lot more to be loaded yet!

[occultfuel]

I've always found the "Law of the squares" a strange method to produce an over unity device. Could you please explain the reasoning behind your use of the: "law of the squares".

Building the Searl Effect Generator based on this law always seemed very strange to me.

But thank you for updating us with the progress.

[DrTerryMoore]

Hi occultfuel, thank you for your comments. A new approach to energy production requires a new science. You cannot use currently accepted laws which in any event are contradictory in some aspects of the current known and accepted science.

[Beamshipcaptain]

It's always dream ONE and dream 2. Look at the game Hopscotch: 8 Squares. 8-sections to an SEG-roller. 8-sides to the cabin on top of the P-11, and 21-footer, DEMO-1. 64-Struts, and 64-flight cells in an Searl's IGV. 8 SQUARED is 64. The squares give you all the instructions for assembling matter and energy. It is the number system of God. Magic squares give all the parameters for building the SEG, and IGV flight device.

[flowerbower]

So, God must have invented chess!? Love that game.

[Beamshipcaptain]

Not chess, HOPSCOTCH. 8 SQUARES. STOP. THINK. ACT.

[DrTerryMoore]

Hi labidus74, materials are arriving now to construct the new design of the SEG. The steps covering construction will be posted to record our progress from time to time.

[labidus74]

cool an update!! I cannot wait to see one SEG with at least 2 stators! :)