Added: 2 years ago
From: offroadjoe83
Views: 86,414
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (124)

Sign In or Sign Up now to post a comment!
  • Sexy ass truck

  • Id take a truck like that over a new one any day

  • whats with the chain between the frame rails in the back?

  • umm..friggin killlllllllerrrr!!!!!! luv it bud !!

  • A few suggestions. the rear fender cut out the edge to match the front. take off a few stickers tighten up the tailgate net shakle flip new tires fuel cell bucket seats a dash from diy4x would look better maybee an E fan i got one on my k10 big power improvment. and some detailing would be sweet!

  • does that msd ignition make i big difference in power??

  • does anybody know how much it would cost to get a new automatic transmission for an 85 k10?

  • @HiMinds depends what you want but say for a 4 speed th700r4 your looking at about $1000 - $1300. I would shop around for sure. you can get one cheaper no doubt.

  • That's beautiful !!! I'd like to see this guy sign up at gmsquarebody and share his build. They are getting a good group of offroaders on that forum with these SAS trucks.

  • bad ass love it

  • gotta love a chevy

  • chevy that has a gmc badge? i realize they are pretty much the same thing but there is a gmc badge on front quarter panel

  • @gsteinisu  who gives a fuck quit your dumb bitching

  • @gsteinisu probably got it off a gmc cuz they chevy one was messed up. didnt bother taking it off. those badges are like 50 bucks a piece new.

  • sick as hell chevy all the way

  • needs more stickers

  • Great looking K20, I just hope you've fixed that steering since this video was taken!

  • Great looking K20, just please fix that steering! You cant go that high and still use the stock configuration. Those tires will be all over the place when you hit a bump. Spend the extra bucks and go with crossover

  • well built truck bro that thing el run

  • sweet dude

  • what do you mean theres traffic????

  • im swapping a 4 speed in my 87 any problems bolting np208 tranfer case to the sm465

  • @ryan011793 depends on spline count...

  • holleys are to tempermental demons are the best for 4x4s

  • Edelbrock? Didn't anyone ever tell you Holley carbs are WAY better? Holleys give you a huge HP improvement over any Edelbrock, and they are almost infinitely tunable. The only think Edelbrock has going for it is the fact that they are cheap. Other then that this truck is perfect!

  • @shazbotninja holley's great but so are predator or demon!, agree with the whole edlebrock thing though haha

  • K&N sticker on a FRAM air filter! HAHAHA!!!

  • sir im sorry but your truck is to awsome i must take it for my self ... i meen um to destroy it

  • @hernando091 hay sierras are still nice bro i mean ida taken it off lol but still

  • did you drill the head's for accessory hole's? motor sound's good with that cam,

  • Where did you get that shift handle? Please get back to me!

  • that thing is fuckin siiiicccckkkkk

  • damn, i would hate head butt that dash head on in a mud rut.

  • i wonder if you know when to shift? not like you have 3 shift lights or anything. but nice truck though

  • I want that truck. Nuff said

  • i think u need new tires

  • My favorite truck on youtube, im building a longwheel base. I wish it was as nice as this truck.

  • sharp ass ride man!

  • how about put a front driveshaft in it.

  • sik

  • wat size lift is on that?

  • talk about LIFT springs. god damn lol

  • I wish I had your truck. Thats extremely nice, great truck.

  • I wish I had your truck. Thats extremely freakin nice, great truck.

  • Dana 44 with 40" tires : (

  • You should paint the frame, it's really easy with rattle cans. Just clean the mud off and spray. Takes like 30 mins, you will like how it looks too.

  • the front driveshafts not connected

  • Nice truck, wouldn't want to ever smack my face off of the custom dash pad though lol

  • can i have it ):

  • enough stickers and shifters lights? ha

  • did you have to get a new driveshaft with the 12" lift?

  • @gmcsonoma1

    You would have to get longer drive shafts for sure.

  • @gmcsonoma1

    you just get your old ones lengthend , thats all

  • Hell ya looks and sounds awesome nice work

  • see ya run Amsoil, best stuff out there. And love the truck, LONG LIVE CHEVY.

  • nice truck

  • is it the cam that makes it sound so badass?

  • how high doo you have it lifted?

  • i bought a 1984 chevy silverado c-10 for $50 its go a newly rebuilt 350 turbo transmission and i got it running now. great condtion no body damage eather

  • @TheHailrazer you lucky son of a bitch

  • hi i just got a 14 bolt rear end for my truck and it has 4.10 gearing i was wondering how you liked yours and do they work well?

  • been doin burnouts huh?

  • how much hp

  • not a fan of chevy's but nice truck..I'm a Ford man...hate dodge junk ass rams

  • cool truck....that sucks with that huge gash behind the right fender

  • hows that sm465 holdin up?

  • i see you got your slicks on, are you planning on taking it to the track, lol just giving you a hard time. good job looks good. and great vid quality.

  • Throw the np208 out and get a 205 I'm 14 and I know this shit.

  • @otisshaw13 what do you drive?

  • @otisshaw13

    why do people brag about being young? Id go with a 241 over a 205...thats just me

  • wish you would have got a close up one the instrument cluster

  • sweet i just bought a 85 k20 today. love the lift and tires. what size if you don't mind me asking?

  • shit you have a lot of sponsors! lol! very nice truck.

  • hey nice looking truck....

    if you need cheap parts check me out at:

    iPartCars(DOT) com

  • Baaaadaaaas bowtie!!

  • Nice man.

  • damn how many shift light do u need

  • No kidding I mean the next step is a buzzer or a recoding that yells SHIFT!

    HHAHAA nice truck man

  • need to set it up a little more in the back dont ya

  • @CAMAROIROC1988 it has the fenders cut!

  • it ain't even a 4x4 yet

  • springover?

  • that is the best looking chevy truck i ever seen in my life

  • thats a mudd truck make the right way haha i like it

  • i couldnt really tell but does it have crossover steering...

  • nice truck, u need a dana 60 front though, lol

  • @jdanyluk dana 60 front sucks if your in the water though. My buddy had two that got full of water. They both screwed up.

  • u can buy seals for dana 60 to prevent that

  • Yo man great work, bet it's a beast offroad. my friends call my offroading truck Big Red too, 74 K20 shortbox conversion, lifted with dana 60's and lockers

  • awsome truck but look at 0:12 and the driveshaft aint connected he aint got nothing but a high two wheel drive that realy sucks for him

  • FUCKIN SICK!!!!!!!!!!!!

  • love that setup...i gta a c-20 that im lookin to lift 12 inches..nd not tryin to tell u wat to do but u should cover that air filter

  • is that street legal?? be a shame if it wasnt coz its a awsome machine!

  • those sound like flowmasters not thrush either way sounds healthy as hell

  • BAD ASS TRUCK!!!!!!! I almost have the same engine/trans set up as you, but in a jeep. I would give you my two testicals for your front and rear axles!!!!!!!!!! super envy of your truck.

  • Then you're an idiot.

  • 10 or 12 inch lift?

  • Either way, it's WAY too much.

  • Whys it to much...And dummy me it says it in the title 12 inch superlift

  • What good is a 12 inch lift?

    I mean yeah, if you were going in a straight line with no bumps it would work out for ya. It would be more feasible to have the 52" leaf spring swap from a stock Chevy, then do fender well trimming. It looks cleaner, better, and is much more flexible. Some people will use this kind of set up for mud drags though since lift from leaves is really cheap.

  • Well ive got one under a 85...I took 2 leafs out and i think it will help alot...Havent got it completed yet but I stuck a jack under it and it seems pretty soft. If you look on the 4wheelin site theres a guy that done the same kinda but only took one out and he tucks 44s up in the fenders of course the help with cutout fender flares...I think you just jealous because we waisted our money on that because were not a fan of fender trimming.

  • Well, glad to know it WAS a waste.

  • @loser3203

    "Some people will use this kind of set up for mud drags though since lift from leaves is really cheap. " if you know the answer then why ask other than to be an asshole?

  • Hey dumbshit, when did I ask a question?

    Waiting... Exactly, I didn't. TOGTFO!

    IS THERE ANYBODY THAT DOESN'T GET BUTTHURT FROM EVERYTHING OUT THERE!? Go continue driving your mall crawler around and report back here after some bleach drinking.

  • @loser3203

    uhm you MUST be retarded or something, you asked "What good is a 12 inch lift?" but with a name like loser I guess that explains everything right. why dont you go on you tube some more and say stupid shit on peoples vids. oh wait you already did that. I guess your just one of those jealous people that cant stand someone else having better stuff.

  • Comment removed

  • Alright, point slightly taken. You are being a hypocrite by doing the exact same thing I'm doing. Yes I slit my wrist everyday the length of my arm b/c I envy people like you with all your toys.

    I noticed there's nothing protecting the engine if he indeed does mud drag. Not to mention he has a DANA 44 W/ 40" TIRES!!! It's a 1/2 ton axle. And what I said is not stupid fawker. It's a matter of opinion and you guys got all butthurt. I will end this now; good day sir...

    Apologies to offroadjoe

  • and larger tube headers like 13/4" might take away some bottom end torque but will def bump up the upper rpm hp

  • if you changed your carb to a holley style (i use proform) race carb you should see some more hp and if you change your intake to victor or a super victor syle intake you'll see a jump in upper rpm hp anywhere from 20 to 50 hp but that cam sounds to big for a dual plane intake and in the mud who the hell is not gonna have their foot on the floor anyways?! lol Otherwise its a mean looking truck looks evil compared to my 84 sitting in the garage waiting for a short block and 4 links

  • man thats awesome. should get some monster torque with a 4.88 R&P. got 4.56 on my 00 silverado, n0ice.

  • how much did u get the tires for ???????

  • that is fucking awesome im 14 and got a 79 chevy k20 with a 350 sb a 350 turbo trany and an np203 transfer case. all the interior is custom, now im working in puting 12" woofers behind my seat, replacing the 6x9s and new 4'' speakers mounted in the roof.

  • what kind of lift kit and how big

  • read the more info looks like a spring lift and it says 12 inches

  • Good looking truck man.

  • is that grill custom? i want it !

  • are you in the SGV?? azusa truck? looks good just need a front shaft... careful with your msd box, mud, water,... will eat it up

  • bad ass truck!

  • yo wat kind of camera do u have it has awsome quality its not even staticky plzzzz let me kno wat kind it is n u have the awsomest truck

  • where can i get a lift this big??for a truck like this

  • hey mudderfuka thats my air filter!!!!!!

  • Whats up joe? youre truck came out clean.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more