Handmade Longboard

[bchughes44]

Fuck that is poop

[mgllah]

you said sorry my bad english.... where are you from?

[CallanScoots]

there are hundreds of ways to make a longborad!

HAHA!

[OrangoTangoes]

how did you do the drop through?

[unthinkableglitches1]

looks Bad-Ass!

[Alteredbeast49]

I can't seem to upload my vid properly... but we've been making them outta old water skis!

Check it out below!

youtube.com/watch?feature=play­er_embedded&v=r3ecViXYWtE

[willycom12]

how much dose it coast to make one?

[seroboy007]

what happens if i dont use fiberglass?

[JoeySw337]

@seroboy007 if you don't use fiberglass the board won't be as weather proof, strong, felxable, or look shiny.

[detailrunescape991]

is it just standered ply and btw how thick is standered

[theyohanful]

nice :D

[qazxcdeable]

but overall pretty good

[qazxcdeable]

you used the wrong typ of fiberglass

[eltotoX]

Sweet job! Next time get a router for the edges ;)

[uckomatonta]

Mitäs puuta käytit ? ja miten on tuo lauta toiminu vuosien varrella ?

[kradeler]

good job dude . could you put some mor especifications fron the tipe of wood,the cut ,paint and that kind of stuff?.

[molethrower12]

did you have any wheelbite issues?

[deeprockerluis]

ae you going up that hill or your bearings are too slow???

[gamerfreek2]

the fiberglass is 'fiberglass cloth' you lay it over and pour 'fiberglass resin' on it.

[TheKristyMack]

bet that guy got itchy from the fibreglass



[thestrazman]

TO HOME DEPOT!

[OJJVZ]

Maybe next time make the front and rear (around the trucks) a bit narrower? Would help with the wheelbite issues. But I'm sure you already figured that out.

[ShizSnapRewind]

do you need glass fiber on it or no

[ShizSnapRewind]

do you need carbon fiber on it or no

[mufmaxtv]

you need new bearings lol

[karlwstrand]

nice and stiff? i have a landyachtz evo... i know stif when i see it

[sk8erboii521]

@4:00 that's what she said!

[zack1913]

can i buy it xD

[enelcamino111]

good work, congratulations!

[longbordsplusgirls]

sick shit

[jonno050]

at 2:57, what are you putting on the board, is it like a varnish or something???

[XxPSNHoMeBETAxX]

should make it thinner on the noses but im impressed

[DanDavis10]

@jonno050

I'm not sure but if I had to guess I'd say 95 kg give or take....

[jonno050]

haha 95kg?? how much do you weigh??

[dinoateme]

does anybody know of a full tutorial, including where to get all of the materials?

[29HOCKEYDUDE]

clue??? haha

[XxOvationxX]

now i finally know how to make the concave, thank you so much

[xXundeadapocalypseXx]

can u do it 4x3mm



[MidnightJerks]

yo man how can i make it a drop through ?

[rollface13]

How long did it take you to build?

[kilaclown]

your bearings are crap

but its a good bored by the looks of it

[SlickMullet]

@kilaclown shut up..... there is no way you could have been able to tell the quality of his bearings from this video.

[InsideOutApple]

congrats on making the board, it looks great,

but why the F!@# did u put the shittest wheels known to man on it !

[TheJezzsta]

whoa hes fast at making a longboard



[EricksonSB]

Go to my channel For a REALLY Good deal on my Arbor axis Bamboo Longboard

[INSAN3SKAT3R19]

do u evar get wheel bite

[bluecrab7]

Was the weights placed in the middle, so there's more concave in the middle, and less on the ends, or does it give an even concave all over?

[pookerhead15]

narly! Im gonna make one so i can save some money

[AReallyBigPanda19]

how much did the materials cost?

[dodobird188]

do you need a new truck for a drop through board?? plz respond

[radoriAUA]

That's really sick bro.

[HilltopLongboarding]

plz answer did the concave say and was it good for sliding

[a7xhockeyguy]

Give it a 925 graphic

[WereProfessionals]

whoa shit this dude knows what hes doin alright i just made my first longboard it turned out 2 b sick and were did u get a lush board those r hard 2 find.

[LOLMAN418]

Thumbs up if you didn't make that!

[jarcogoofy]

i made one myself i am gone make a vid so you can see it

[HmccrazyT]

I hate people that post comments that ask questions, when the answers are in plain text DURING the damn video -.- learn to read.

[aTerribleName]

How thick did you make the board?

[321123mikemike]

dont you get wheelbite??

[weardpancake]

you spelled board wrong...



[MrChillDill]

that was incredible

[xPowerofwillx]

gimme it

[mentalRCburnouts]

fiberglass is a bitch and i wish i had a sanding tool

nice board man .

[Sh1nyRainb0w100]

craaaaaaaazy wheel bite bro :(

[solduke]

Does that get wheelbite?

[Sskier4]

and what did you use to put it on?

[nizzepizze97]

ugly borad hahaha

[mrchriss]

@nizzepizze97 But its ownmade and thats the point. :P

[anonamouse13]

nice dude but I had the unfortunate experience to learn what fiberglass splinters feel like down in a man's unmentionables so just some advice for next time...wear gloves when cutting off the excess fiber glass

[heru567]

great video im makeing mines but i would like to know do you wait until the resin dries with the fiberglass and then you add another coat? or just add coat after coat?

[McCurryBoy]

nice board!, and does the fiber glass just make it stronger?

[clincor94]

I'm impressed seriously!

[mbclite10]

Good work man looks sick

[No4al]

Hey great vid but can you tell me how long it is and how wide it is thank you and another thing 0:21 How did you make that not the longboard but the press wide like that i see its a block of wood with an smaller wood on it ? pleas tell me because i want to make him two

[rogerson69er]

good work dude!!!!

[Axeomeface]

how did you make it drop through

[ricardillosk8]

i love this board ... i was looking for some shapes .. but does have to do with the resitance on the trucks=?

[louisisalegend]

its too wide

[xtremerami97]

what wood is that????

[xtremerami97]

what wood is that and do you need fiberglass?????

[tristanjake123abc]

WHAT ARE THE DEMENTIONS FOR YOUR PRESS

[pedrocunial]

gosh! We salute you!

[immahosss2796]

why would you paint it you idiot?



[ricardillosk8]

why some longboard truck are placed different as a regualr skateboard with the center screws facing each other .???

[ricardillosk8]

how long is that board?

[thexXCODXx]

the awkward moment when he does all that hard work then stands on it again... and it breaks...

[TheSurfersEye]

Do you think fiberglass is a need?

[TheZman77]

very nice finished, how much did u spend in materials

[Awesomewafls]

Wow. amazing job I can tell very time consuming but u did it! Very nice... :)

[MyWeed09]

smart idea with the anvil when i make a board i park a bobcat on it over night an it works beautiful but a anvil much easier thanks for the idea

[Rucasaur]

really good video, nice

[silysith]

where did you buy the fiberglass?

[aTerribleName]

@silysith you can get it at home depot or something its just a paint on fiberglass

[matalica46]

@silysith you can get it at lowes

[mw2TV100]

why did you put fiber glass?

[Dude6311]

your nose is really fat

[ZomgJiggles]

How are your rails after pressing using screws?

[reviewsnake]

that looks nice

[karelmeijer]

wath kind of glu did you use 

[mcgriffinz]

where did u get an anvil?

[zukarius]

that or you can just buy one..

[1306skate]

4:00 thats wat she said lol but serously really nice board

[lsarrouu321]

this is bro as

[Drimbz]

how did you know how big and what dimensions to make the holes for the drop through mount? I'm thinking about trying to make my first drop through and i have no idea how to make that hole aha

[reinohh]

@Drimbz

search with google or just draw sketch to a paper and cut it out and try to fit it... work it out.

[MyWeed09]

@Drimbz gigidy thats what she said lol look at ur trucks take the hangers off an bam trace that take a router to it worked out for me

[MegaDhproductions]

@Drimbz if you have randals, or some other truck with the little triangles on the baseplate, measure how wide the part of the baseplate that the kingpin goes through, then measure how long it is, cut the hole, and saw some slits in for the triangles. Start out small and work it slowly.

[JesseNerfProductionz]

@Drimbz drill holes around the circnference, smash the hole out with a hammer and sand the roughness

[prophetic0sage]

@Drimbz Hey there!! i knoW howwww ... GO TO THE RANDALS trucks website... They have a Drop thru template for boards:)... its Awesomeeee, also im part of a sk8 team that is skating across the USA, i have a few bombing vids, but i will have a bunch when we skate from oregon to new york in about 6 weeks, we will be leaving :) so check us out

[Xnabster]

@Drimbz theres many templates on the internet with many cut outs and all the dimensions in inches and mm. just type in longboard template into google images, u should find a few

[Skibumwill3]

@Drimbz silverfish have a nice template!

[MrUnbelievablee]

@Drimbz Measure where the holes to attach the trucks to and measure, from the innermost part of the hole, 3 mm inward toward the center of the longboard and put a mark there. do this next to all the holes. then drag some lines between the dots and draw out how you want the large hole. then cut out with this drill and jigsaw and you have a drop-through design longboard! :)

have fun making your board!

[Drimbz]

@ChickenBoob571 usually you use 4 plies of 1/8 inch plywood for this, not individual sheets. you should be able to find it at a specialty wood store somewhere! home depot would never carry it though

[luvinzunigaduzt]

dude you are my hero nice video loved your result i got 2 question how much did this project cost to make, and how long was the time process to make the board?

[SDlongboarders]

looks like a 9two 5

[drio3000]

Realy nice board dude ;p

[CROUCHINGCOUGAR]

that is some doped board man!

[blackgriptape]

sick board

[goldmeber5]

how long did it tack you to mack that board?

[AliM744]

What glue did you use to sandwich the ply? :)

[GamingCommand]

what are the holes at the end of the board? what do they do?

[AHHMattThomas9]

HOW TIGHT ARE YOUR TRUCKS MAN!!!!!!!!!

[triviumfr3ak]

and what was the total time it took you to make this

[triviumfr3ak]

paint it something other than black...

[CasperLongboarding]

looks kinda like the 9two5

[callmejoefish]

you took the measurements from the drop speed right?

[bmxbilda5]

aussie?

[inferno2080]

Oh yeah and did you actually screw through the plys INTO that base board to make the concave?

[Johnnyz543]

thats so beast man, props

[banaanananana]

haha random old lady at 2:44



[inferno2080]

That's a really nice deck u made. Where do u get the stuff to do the fiberglass? And where can I get a tutorial on how to do it?

[Telfdog95]

Did you fiberglass the top or bottom of the deck? and could you use clamps instead of screws?

[mountainboarderuk]

one of the nicest homemade boards i have seen nice job dude

[pengald]

@ddude110 probably cuz belly racers are like as wide as howard taft

[ddude100]

nice, reminds me of a earthwing board for some reason

[georgeisfast]

how did u get the fiber glass

[georgeisfast]

How think was the wood u used

[burkem13]

hmm, that's a very simple, yet effective way of pressing concave. You could modify it to press in some camber as well by adding curved rails to the press and screwing into that. I may have to try that...

[kaillen11]

BLUDDY NICE BOARD!

[RMflims]

@reinohh what glue do you use?

[MrJojogunther]

why do you need fiber glass

[LongboardUK]

@MrJojogunther It adds extra flex while making the board more durable.

[nedfbrcks13]

@MrJojogunther it also protects it from the rain. kinda makes it water proof

[haseoice]

that's beautiful, I like how there's still a little bit of wood grain showing :)

[kylek1k15]

end of mw2 map? at 4:03

[EatDeeznuts1]

@kylek1k15 wtf r u talking about??!

[kylek1k15]

@EatDeeznuts1 the tryangled sighn in the back round

[brgxxify]

where can i download this track?

[nikoalvez]

nice work

[dwarvinicus]

HAHAHA, not a professional he says. did you read that at the beginning? this is the best tutorial ever! THANKYOU!! :D

[tacotacotacotacobarf]

The nose and tale look like a chode... i would have made them a little bit thinner like the dervish..

[ScaredOfEvilClowns95]

why do you need glassfibre for ???

[chadweezybaby]

what kind of shoe laces do u use?

[dnewman13579]

how did you make the drop through?

[TheM40A3beast]

Nice! looks factory made

[chudibap]

i like mine a bit softer, but very nice board man!

[SiXAXiSMofo]

Thats is so sick!

[PaRtEnBULLsheet]

this reminds me of ps2 music

[FreakAssault93]

I don't like this ugly shape. I've made my first one too, I think it looks better. Check out my Vid (I'll upload it in maybe 2 days)

[gurban333]

this thing is a peice of shit.

[shinando]

@gurban333 then show us how you make yours.

[minidude6667]

Been admiring this vid for a while, excellent technique would you mind if i asked what the height and width of the two boards you used to make the drilling platform for the concave?

[spitfireskater4life]

where did you get the fiberglass and resin?

[udead09]

how much did it cost to make?

[kfuker]

what r the measurements for the drop thru holes

[Jobryan205]

sick. shouldnt have painted it though

[mauisurf95]

dude that would make some crazy wheelbite

[reinohh]

@mauisurf95

yeah, I cutted this board a several times after this vid. had to cut about 1cm off over each wheel.. no more wheelbite danger.

[xMJ93x]

@reinohh

Ey dude, im thinking of making a longboard aswell, i want minimum flex possible u have any tips?

[BOLETEANDO]

Good job dude i ain't as handy dandy so i guess i'll spend 200 bucks haha

[die34343]

do you know how to make drop decks?

[baggens55]

how many sheets of birch did you use? how thick were they to begin with and how thick is a good end product?