One magnet no bearing bedini with 10 satellite rotors

[Sanskara316]

Great experiment Johnny, You'll be able to run the primary with those sattelite motors Wow!! looking forward for ur next update

[Javierm0n0]

plus side awesome project, minus side, no where to put the left overs :/ This is awesome man thanks for sharing!

[jonnydavro]

@Javierm0n0.Glad you liked it and i must admit this was one of my favourite experiments too.Cheers.Jonny.

[OnenessApostolicMan]

@jonnydavro This is really cool! Do you have the plans posted to build one any where?

Thanks

[chillybill957]

very cool, my new fav video! It brings to mind many questions. What if you hover on above as well? What if you put one ball mag into a smaller container will you get a higher rpm? If so what will that produce? Conversley what about a larger container? I have so many I may have to reproduce your experiment. Very nice, good job.

[jonnydavro]

@chillybill957 Glad you liked it.If you use a smaller container the rpm's are higher,with a larger container,slower but the stable satellite i show seems to be a great generator.This is where you just have a small 6mm sphere spinning inside a coil on the spot.Lidmotor has put this to good use in a device he calls maggie and his vids are well worth checking out as he has really put this find to good use.Satellites made another appearannce in a recent vid i made called "energy chain"Thanks.Jonny

[killerbeenl]

Wow crazy and yet so brillant :D, mazing wow

[jonnydavro]

@killerbeenl.Hi.This experiment is probably my favorite of all.It is quite amazing that so many magnets can be influenced by just one magnet and so little input power and the funny thing is it would spin many more,i just did not have any more to use.If you get a chance,check out my stable satelitte vid.Thanks for your comment.Jonny

[Lukeidea]

Awesome cant wait :)

[Lukeidea]

*amazed

In awe 

[jonnydavro]

Hi Lukeidea .I still find it amazing that one little spinning magnet can do all this.

This principle can be used to make satellite generators like i show in another vid.Many thanks for your comment.Jonny.

[Lukeidea]

Wow, I'm really amazing at this creative genius.

May I ask if your are using a 12 v 7ah battery. Or the 2.8 you mentioned in the descriptions.

I have a strong feeling this machine is producing more electricity than your putting into it by the configuration of the magnets.

Amazing

[Ebdan88]

Wow, Very nice job....:-) I am shore someone will soon (hopefully) come up with some use for this device :-) Keep up the good work.........

[jonnydavro]

@Ebdan88 Thanks.The satellite magnets can be used as generators as i show in a later vid and also check Lidmotor vids out as he has put this idea too good use in a device he calls maggie which can run all sorts off stuff.thanks for your comment.Jonny

[jib1000]

Don't call something a motor if it can't do any work. If you put a drive shaft on there nothing would happen. You can't get usable energy from this. Also you forgot to take into account friction. Duh!

[jonnydavro]

@jib1000 The motor is already doing work by spinning the 10 satellite magnets and it could spin many more.Each of these spinning magnets,if placed in a coil will generate electricity like i have shown in another vid.Drive shafts work too.Cheers.Jonny.

[jib1000]

@jonnydavro Show your device doing work then... You can't because perpetual motion, and over unity are impossible.

[DadHav]

Indeed. Johnny should be taxed for all the fun he's having.

John

[comwarrior69]

I was chuckling all the way through the video...

in theory, you coild place those gen coils all around the side of those tubs and any lenz drag will only affect the 6mm neo's not the main roter...

So, theoretically, you could get OU...

[JimminyPricket]

Because you asked "can this thing produce more energy than you put into it? "

It's impossible to achieve that. I informed you of that in a crass manner. I apologize for being rude. I just get tired of reading the same ignorant question in everyone of these "energy" videos. on youtube.

Sorry I took it out on you

[fdoca]

@JimminyPricket

Why the F U are here put stupid comment wasting my time to read?

[JimminyPricket]

@fdoca

Uhh... In the future, would you mind replying in some form of written communication in which we can actually understand?

Thanks,

The Management

[JimminyPricket]

The LAW of Conservation of energy??? Ring any bells?

Obviously our education system has failed us.

[JimminyPricket]

Not so silent mind, huh? Perhaps you would consider "silencing" your mind just long enough to read a remedial physics textbook.

[jonnydavro]

Good question.Looking at it again,there does seem to be a lot going on for 2.8v at 11mA but i would not know where to start in measuring the output but i do know it will spin a lot more magnets than 10 so who knows.Check out my stable satallite vid.This type are better for generating electricity.Thanks for the comment.Regards jonny.

[Shonapapa]

Very ingenious. Bravo. Keep it up.

[saskaluczak]

good

[DIYSOLARPANELS]

good vid. i have video explaining how to build cheap magnet motor yourself

[64298]

Are the spheres steel balls or sphere magnets? Can you post a link where the circuit you show can be printed out.

Am I correct in thinking that magnetic coupling is spinning the spheres?

[jonnydavro]

Hi 64298.The sphere's are 6mm N42 Neo's.These can be found cheaply in magnetic bracelets.Magnetic coupling is spinning the spheres as they are rotating due to the rotating magnetic field from the main rotor.The circuit i am using can be found at the energetic forum or if you pm me your email,i will send it you.Many thanks.Jonny

[alex681219]

Fantastic!! years ago I see jhon depew magnetic resonance grid

(watch?v=ezMyUiuZt3w), and you show a similar experience more clearly. I´m interested in the research of rotatory disc shape coil (inverse prosess). Have you try pankake tesla coils, or rodin coils? the shape of the coils can improve your achievements ...tkx for share ;)

[jonnydavro]

Hi Alex.I have not tried different shaped/types of coil yet but it would be interesting to try the types you mention to see if improovements can be made.Thanks for your comment.Regards jonny

[CosmicGnarler]

Looks like you could hit a harmonic resonance with the balls position if you used proper sized saucers, such as increasing or decreasing total track length to co-incide with speed and time of pulse. To have the ball close to coil when its pulsed and makes 1 track around before another pulse. How quick do you think that would be? TBH you might have to use a larger slower rotor on top. Magnetic hammer of harmony?

[jonnydavro]

Hi CosmicGnarler.I have got the satellites spinning on the spot now.Have a look at my later vids if you get the chance.Regards jonny

[4CHRISTONLY1]

Jonny . Nice Going My Friend . You proved My point that a Jt is a transmitter of energy . Keep Going . you have Ou at you finger tips . just recover over your input with the satellites . Your Friend

Gadgetmall

[jonnydavro]

Hi gadget.I have had a joule thief with some of your mods running of one stable satellite rotor and it is i who should say thanks to you for sharing all your JT mods.I think you should have a go at this gadget,you will like it and who knows what you may discover.regards jonny

[Pirate88179]

Jonny:

Well done my friend! I don't know if this will lead to OU or not but you just got us a whole lot closer for sure! Maybe even beyond the barrier. I feel like I am watching history here and you should be very proud of what you have done. 5 stars and if I were wearing a hat, I would take it off for you.

Bill

[Drevtoobe]

Hey Bill and others: Let's come back down to earth. What you are all looking at is essentially a bunch of motors being driven by the batteries powering the main coil.

Most likely this is what's happening: The coil fires giving the central spinning magnet it's push. The main spinning magnet (and the coil to a lesser extent) "broadcasts" a changing magnetic field in the immediate vicinity that's strong enough to get the small ball magnets moving, so that they become small motors themselves.

[Drevtoobe]

The balls roll around inside the translucent cups burning off energy that they are picking up from the varying magnetic field. The net effect of all of the ball magnets rolling is a Lenz drag on the central spinning magnet, slowing it down slightly.

This is a very nice demonstration of the law of conservation of energy. The batteries pump energy into the coil which them pumps energy into a bunch of spinning and rolling magnets. Then all of it becomes heat. It's pretty neat, and looks cool.

[CosmicGnarler]

Exactly.

[jonnydavro]

Thanks Bill for your kind comment.I think there are many things to discover about this setup and i will be experimenting with this for a fair while as i find something new every time i mess with it so who knows where it could lead but i know the road to ou is paved with fun.Cheers.jonny

[BodkinsEnergy]

Im not coming to your house for a cup of tea.......where are all the cups?

LOL

great work jonny

[zebok3]

Xenomorphlabs makes a Lenz law point.

The pulse coil will continue to function near unity even with increased amp draw resulting from additional Lenz drag.

[Can101276]

Awesome!!!

Trying to picture all the spinning magnetic fields is mindblowing!!

This may have some real potential and I am eager to see your next development.

Thanks for sharing.

[retrod1]

Wow!  Way to go Jonny! Harvest that power! 5 stars

[XenomorphLabs]

It remains to be seen if Lenz law wont throttle the main rotor too much once a significant current is extracted from pickup coils off those satellite magnet spheres. Only if that doesnt go into full effect then could anyone consider checking the setup for "overunity" here.

[afdhalatifftan92]

Impressive!!

A multi-phase alternator!!

Love it!!

[zebok3]

Major overunity breakthrough! President Obama should have your set-up cloned and wired into the smart grid.

[marthale7]

I am sooo thinking  those could be spinning inside a coil Thanks for sharing. I am still trying to think of a use for this.

[GBluer]

LOL, Now that is cool Jonny.

Now you just need a lot of pickup coils for all them magnets.

[jonnydavro]

Hi slayer.Ive just ordered another 40 magnets so i am going to need a fair few.Regards jonny

[XenomorphLabs]

Insane !!! ;)

Very nice, it seems that a car alternator pickup-type would give you a constant current. Like many pickup-coils around the plastic pot or the 3 -phase approach.

Question: The higher amp-draw is a consequence of bringing in the spheres right?

I mean it is still a very low amp-draw hehe

[jonnydavro]

Hi Xenomorph.There are like you say a number of recovery coil options,which is best i don't know .I will try to work through them and find out.I did use my pickup coil and i placed it between two satalites and the one pickup was shared so with some clever positioning,that may be an option too.

The amp draw was between 10mA and 11mA @ 2.8V but i forgot to turn my 10k pot for the vid.When i did the satalites would spin on 7.5mA.Also when i increase the voltage,some would self start.Regards jonny

[4CHRISTONLY1]

i suggest putting a train of balls in one and see if you get a continuous voltage on your pick up coil

[jonnydavro]

Hi Gadget.i can get continuous voltage from my stable satellite rotors.Have a look at my last vid and you will see what i mean.Thanks for your sugestion regards jonny

[rainmanp7]

Awsome they could be powering coils

[harpbloke]

wow, thats completely mental !!! wow, the possibilities...

thanks for posting that vid, i'm well impressed

[jonnydavro]

Thats what i thought.Thanks harpbloke.Regards jonny

[harpbloke]

hmm my comment went missing. anyways, thanx J.D. thats an awesome vid