@curtismundy We tried to give it away on craigslist. nobody wanted it. we stripped almost all the good parts out of it. rear axle was junk, front was indy. maybe the top if someone needed it.
I use my 81 to mud with it has the i6 with 4 speed its all factory except for a free flow exhaust homemade, run racing fuel in it for the first time and it was my second pass third overall (my dad was running it too) and i was #3 he was #7 so by the time i got out he would get in and vice versa (was only 8 or 9 people running) but anyways the throttle stuck on it and i stomped it to try and unstick it like my dad told me to do prior to the run and it didnt work
so i was 10 feet from a tree and hit the brake and clutch cut off the key and it was still reeving went all the way to 6 grand before it went pop pop POW! split the factory muffler in 3 spots now that is what i call redneck engineering
You guys have way to much fun. If I can talk my girl into filling my tank, she tells me I cannot go off roading :( Been almost a year since my ex seen some dirt, than again my drivers front U Joint was popping last time it was in four wheel :(
@rhauf1 You could say I am currently seeking employment. Going through a career transition. Unemployed, but looking forward to graduating College in December but will be $25,000 poorer. :(
@daverbmxer Rear was a busted one we swapped in to keep it rolling after taking the good one. front is independent junk. hubs are gone. if you want the center section come get it. its still good.
@rhauf1 That's understandable then. If both axles were complete and the front wasn't IFS, I would have bought them for my Samurai if you were closer though!
Information on the red bull dozer . / 4x4/ . 1983 bronco 351w, mild cam ,edelbrock heads . aluminum intake edel carb , shorty headers, pytronics ing, c-6 trans 3,55 gears w spool , 37" tires. with rod knock ( now ) still runs .. rebuild on its way, plan on 4 linking rear, subscribers wait,,,,, haufs broncos geting modified soon to......
it was bought partially disassembled for parts. we stripped it the rest of the way. then attempted to give it away on CL again, nobody wanted it. so it's going for scrap metal (now that we've had our fun with it)
I'm not the owner, just another subscriber. Knowing some of the WEROCK competitors, and watching the competitions, I (personally) wouldn't build a rig without FI. They could be upside down and still running. It's awesome!
@lostburro ohhh ic u were saying it needs a FI but there great till they flip and the oil pick up can pickanything for the valves and they heat up and seize....
stuff people do when there bored,, and in the future,, take every thing out of the rig (just in case you happen to roll it) or it will be in your lap or be a yard sale .. I guess the roll cage works ,, no to bad for a bronco a red neck and a Lincoln welder .
Lol I think the Toyota won.
VincentViolence 2 weeks ago in playlist Uploaded videos
i coulda used parts off that
curtismundy 7 months ago
@curtismundy We tried to give it away on craigslist. nobody wanted it. we stripped almost all the good parts out of it. rear axle was junk, front was indy. maybe the top if someone needed it.
rhauf1 7 months ago
IT'S TOO PAINFUL!!! I CAN'T WATCH! ...Ohh, what the hell. It's not my 4Runner.
taitai907 7 months ago
lol, this makes me feel like I have a car now. I own a pathfinder. :(
DRTMaverick 7 months ago
no front locker?
bh14231 8 months ago
I use my 81 to mud with it has the i6 with 4 speed its all factory except for a free flow exhaust homemade, run racing fuel in it for the first time and it was my second pass third overall (my dad was running it too) and i was #3 he was #7 so by the time i got out he would get in and vice versa (was only 8 or 9 people running) but anyways the throttle stuck on it and i stomped it to try and unstick it like my dad told me to do prior to the run and it didnt work
10secondride 8 months ago
so i was 10 feet from a tree and hit the brake and clutch cut off the key and it was still reeving went all the way to 6 grand before it went pop pop POW! split the factory muffler in 3 spots now that is what i call redneck engineering
10secondride 8 months ago
somebody shoulda count how many times he stalled tha red rig
UndergroundKingz187 8 months ago
You guys have way to much fun. If I can talk my girl into filling my tank, she tells me I cannot go off roading :( Been almost a year since my ex seen some dirt, than again my drivers front U Joint was popping last time it was in four wheel :(
Currency49495 9 months ago
@Currency49495 wait a second here.. what does your girl have to do with filling your gas tank?
rhauf1 9 months ago 2
@rhauf1 You could say I am currently seeking employment. Going through a career transition. Unemployed, but looking forward to graduating College in December but will be $25,000 poorer. :(
Currency49495 9 months ago
@rhauf1 bahaha!
dixiemudnut 6 months ago
what kind of axles does the red rig have under it? and it should have a good safety crash test rating
BradyHill1 9 months ago
@BradyHill1 stock bronco axles (dana 44 TTB front, 31 spline 9" rear) the rear has a spool
rhauf1 9 months ago
It's too bad those Toy axles went to waste.. could have got a few hundred out of them.
daverbmxer 9 months ago
@daverbmxer Rear was a busted one we swapped in to keep it rolling after taking the good one. front is independent junk. hubs are gone. if you want the center section come get it. its still good.
rhauf1 9 months ago
@rhauf1 That's understandable then. If both axles were complete and the front wasn't IFS, I would have bought them for my Samurai if you were closer though!
daverbmxer 9 months ago
Best video yet. Is that the ol bronco?
DrJonnyFever69 9 months ago
1:46 I laughed my ASS OFF! I hadn't laughed like this in a while! #LOL
wwjoshdew 9 months ago
its all good if a couple people hit the dislike button it just makes the like bar look like a joint burning
fuckthispost 9 months ago
Information on the red bull dozer . / 4x4/ . 1983 bronco 351w, mild cam ,edelbrock heads . aluminum intake edel carb , shorty headers, pytronics ing, c-6 trans 3,55 gears w spool , 37" tires. with rod knock ( now ) still runs .. rebuild on its way, plan on 4 linking rear, subscribers wait,,,,, haufs broncos geting modified soon to......
johnvineyard67 9 months ago
hahaha thats awesome
bigpimpinRay 9 months ago
You guys just have TOO damned much fun!!!
Couldn't "give" it away! That's funny! That 3.0 block would make a great boat anchor!
lostburro 9 months ago
Toyota wins!
drk421 9 months ago
i would have salvaged the axles at least.
pfun41 9 months ago
That broncos official name is the scrapper!
ojaiammar1 9 months ago
@crombieposterboy I figured someone would say this :b.
it was bought partially disassembled for parts. we stripped it the rest of the way. then attempted to give it away on CL again, nobody wanted it. so it's going for scrap metal (now that we've had our fun with it)
rhauf1 9 months ago
nice, i have an 85 4runner w/ the 2.4; those will never die! but ya, the 3.slow ain't a very good motor at all.
ferd9191 9 months ago
would have been super awsome if he didnt keep stalling it.... needs new carb
84chevyguy 9 months ago
@84chevyguy
Needs FI.
lostburro 9 months ago
@lostburro oh i got ya its nice looking though reall strong..... but do u have front locks on it.?
84chevyguy 9 months ago
@84chevyguy
I'm not the owner, just another subscriber. Knowing some of the WEROCK competitors, and watching the competitions, I (personally) wouldn't build a rig without FI. They could be upside down and still running. It's awesome!
lostburro 9 months ago
@lostburro ohhh ic u were saying it needs a FI but there great till they flip and the oil pick up can pickanything for the valves and they heat up and seize....
84chevyguy 9 months ago
@84chevyguy
That's why they invented dry sumps.
lostburro 9 months ago
this is so fucking awesome
theoriginalmodz 9 months ago
stuff people do when there bored,, and in the future,, take every thing out of the rig (just in case you happen to roll it) or it will be in your lap or be a yard sale .. I guess the roll cage works ,, no to bad for a bronco a red neck and a Lincoln welder .
johnvineyard67 9 months ago
man that truck needs an oil change!!
ils360 9 months ago