Excellent! Though the materialists will be much more impressed that they discovered this marvellous device on YouTube, than the fact that someone spent so much intelligence making it work.
There is no comprehensive parts list and never will be since this one has been dismantled. The description above includes a link to a web page that contains a basic write up of the model. A fuller write up appeared in Constructor Quarterly #65.
1000 years from now, a fisherman is going to pull this up from the ocean floor. It will sit in a museum for the next century before being scanned by advanced equipment and a team of scientists.
The scientists will declare that this was an astrological calendar. Conspiracy nuts will insist that aliens help in its construction.
This looks like the thing I desperately wanted to make when I was 7 but just couldn't quite work-out what should go where. Thanks for showing me how to do it . Perfect !
To get silent operation, turn your volume down :-)
When originally built is was quite a bit quieter than shown in the video. A couple of trips on a plane in the baggage compartment put everything out of alignment enough to make it loud.
That said, the motor in the isn't the quietest so it has never been really silent.
Yes and no. Meccano owns the Erector name these days so when you buy an Erector set, you're really getting a Meccano one. Old Erector was originally a copy of Meccano and is different but not to the point of incompatibility.
I want this set. wow. Can you please inform me where i can buy such kits? i just want 100,000 pieces at my disposal and just create my own mechanical marvels. Please get back to me =)
I don't know how much time I put into it. It was a few years ago now, but my best estimate is that it took less than a month to build and tune up. Of course, I was only working on it occasionally in the evenings.
wow i seem to have stumbled upon aother subject matter to waste my entire life away on you tube with - lego and mechano models! at least this is related to my degree (mechanical engineering) as opposed to football etc. sweet invention id like to take up technic again some time i used to make some bad boy mechanisms as a kid :)
I didn't use any kits, just lots of gears I've accumulated over the years. The holes are half inch (12.5mm) spacing, so overall it is just over 5.5 inches in each dimension.
As for power usage, it ticks over at about 1.5 volts and would have been running from circa 3 volts in the video. The motor I used was drawing a couple of hundred milliamps.
It's cool... and comparing it with Lego just doesn't make any sense... There's no comparison when it comes to making engineering projects. Lego is like paint by numbers--Meccano is a blank canvas
Meccano is anti-Islamic.
karezza6 2 weeks ago
saw 11
da2sk8ers1 2 months ago
its asking for rape
Naproxenum 2 months ago
now just find flux capacitor and you have time machine
tomislavlac 7 months ago
They say that if you were to open up Dick Cheney's chest, where his heart would be, you'll find one of these...
JDCoolMan21 7 months ago
Creeper spawner! *hits with sword*
BrickOfDarkness 9 months ago 3
Not that i wouldnt appreciate your effort, but... ya know there are a lot easier ways to produce sound.
Aerensiniac 9 months ago
noisy and useless.... i love it!
mrmadame28 10 months ago
....but does it blend?
xXScotty1993Xx 10 months ago
It is powered by 20 mice running on a wheel.
Look up Hoarders Living With Rats and you'll know what I mean
Sunfadedlovejaded 10 months ago
Excellent! Though the materialists will be much more impressed that they discovered this marvellous device on YouTube, than the fact that someone spent so much intelligence making it work.
iain399 10 months ago
interesting, useless thing
Groove1993 11 months ago
which set you used to make that? is it multi 50 ?
sufianspice 11 months ago
I didn't use a set. A multi 50 wouldn't have enough gearing but should have decent proportion of the other parts.
paulidale 11 months ago
@paulidale ok and if i want to do the same gearbox what i need to buy then?
sufianspice 11 months ago
There is no comprehensive parts list and never will be since this one has been dismantled. The description above includes a link to a web page that contains a basic write up of the model. A fuller write up appeared in Constructor Quarterly #65.
paulidale 11 months ago
Its the future of electric cars
xpez 11 months ago
ha ha.. sexy..
kiyotewolf 11 months ago
what does it do?
SirCattlemenJoeseph 11 months ago
Nothing
paulidale 11 months ago 26
@paulidale The best kind of thing to do :p
Cam4cha 10 months ago
Stick your finger in
iijedii 1 year ago
A political machine. Moves a lot, is interesting, and does not do a damn thing.
madisonelectronic 1 year ago 6
1000 years from now, a fisherman is going to pull this up from the ocean floor. It will sit in a museum for the next century before being scanned by advanced equipment and a team of scientists.
The scientists will declare that this was an astrological calendar. Conspiracy nuts will insist that aliens help in its construction.
mspeir 1 year ago 67
Sadly, this model is gone and vanished. Reduced to its components.
Still, it is a nice idea...
paulidale 1 year ago
@mspeir Exactly what i was thinking.
cxrodformrx 1 year ago
@mspeir
and it will be the new compass for the new mayan calender...
Fieldsl3 11 months ago
@Fieldsl3 lol
mspeir 11 months ago
Do they still sell this? :(
simsfreak555 1 year ago
Yes, all these parts are still available. Google for Meccano Dealer.
Failing that look for the ISM dealer's page.
paulidale 1 year ago
@paulidale ha thanks!
simsfreak555 1 year ago
what a racket that is
adalstan 1 year ago
what does it do?!?!
561inurface 1 year ago
whaat the fuck
V8block8 1 year ago
Useless box is useless.
Or... Usefull if you need to get rid of a baby.
I'm just saying.
SolalChabauty 1 year ago
You got a lot of time on your hands man.
muffdriver69 1 year ago
this is very usefull... if like lisening to whitenoise...
imadethisaccount0 1 year ago
its the heart of optimus prime hah
PSChrisDC 1 year ago
I am afraid of this machine, it will kill us all
1CaptainAustralia1 1 year ago 4
who superfast clock
thebionicleman123 1 year ago
Where do you shop for parts?
AERO1779 1 year ago
Try googling for "meccano parts" or "meccano dealer".
The ISM web site also has a page of parts suppliers I believe.
paulidale 1 year ago
@paulidale Thanks! I will check it out.
AERO1779 1 year ago
you are a pich
roncamarcelo 1 year ago
Q hermosa kakita...! Y el matillaso cuando viene..?
roncamarcelo 1 year ago
Keep the power on and see how long it takes for something to fail... better keep it lubed.
afmc0321 1 year ago
thats cool but wat does it do?
julianbell90 1 year ago
Very nice! :)
EverFlowingX 1 year ago
At 0:53 it looks like some weird robot is DJing and the "record" is one of the gears.
Goldendroid 1 year ago
So what does it do ?
cristian3131 1 year ago
u made it literal
reubength 1 year ago
Oh man, what a terrible noise......
railstoruin 1 year ago
genius...
vdubs4life1964 1 year ago
Very nice. Way to go!!
zzapzzin 1 year ago
scusa...ma l'utilità??
clavortix 1 year ago
schrotthaufen
Handelsklasse1 1 year ago
fukin hell wouldnt b surprised if that monstrosity could port u through time lol
sylar1989 1 year ago
Is it possibles to travel through time with this device?
Kunibuler 1 year ago
very ingenious I take my hat off to the person that made this, it is a remarkable feat in engineering
schmink2354 1 year ago
What a lovely sound it creates
TuX1fIed 1 year ago
whats that stuff called ? those blue pieces that the cube is made out of?
FACEwithaBUTT 2 years ago
The blue pieces the cube is made of are Meccano Angle Girders and a few Perforated Strips.
paulidale 2 years ago
@FACEwithaBUTT Actually, they are called erector sets, seriously, no joke
Userwastaken 1 year ago
@Userwastaken lol
FACEwithaBUTT 1 year ago
@FACEwithaBUTT I'm really not kidding...
Userwastaken 1 year ago
well done, i grew up with mecano, shame the modern stuff is crap and letting kids be dumber and dumber
peeeete 2 years ago
What's it do? LMAO
kryckeestrooff 2 years ago
It does absolutely nothing.
Except for the amusement and fascination it causes.
paulidale 2 years ago
Unlesss of course you reach in there, then it shreds your fingers!
Postscript624 2 years ago
It makes noise.
cardhang 1 year ago
that looks frekin awesome. No doubt a lot of time and energy spent into making it
channanox 2 years ago
Didn't take all that long to make from memory. Not that I time these things. Quite a bit of rebuilding and adjusting.
paulidale 2 years ago
looks like a overkill coffee maker..and whys the video so long? got the point after 15 seconds.
ragingelephants2005 2 years ago
that thing is working soo hard :)
chance823232 2 years ago
Yep! It's working to entertain us mwahahahaha! A most wonderful waste of electricity if I ever saw one!
AAErikCO 2 years ago
This looks like the thing I desperately wanted to make when I was 7 but just couldn't quite work-out what should go where. Thanks for showing me how to do it . Perfect !
bertwindon 2 years ago
nice one
johnnyht2007 2 years ago
single motor?
chance823232 2 years ago
Yes, it is all driven by a single small motor.
paulidale 2 years ago
stick your finger in there
mycurse333 2 years ago
You first :)
AAErikCO 2 years ago
dip it in motor oil... :P
kakureru 2 years ago
i dare you to make it again
wolferean1production 2 years ago 2
I double dare you to make it operate silently :o
AAErikCO 2 years ago 8
protect the electical circuits and place it under water :p
aarschgezicht 2 years ago
To get silent operation, turn your volume down :-)
When originally built is was quite a bit quieter than shown in the video. A couple of trips on a plane in the baggage compartment put everything out of alignment enough to make it loud.
That said, the motor in the isn't the quietest so it has never been really silent.
paulidale 2 years ago 5
"To get silent operation, turn your volume down :-)
" LoL'd :P
Anyways, cool machine you got there. XD
weeruz 1 year ago
SMOOTH!!!!
Ratboy8888 2 years ago
nice
vaagen58 2 years ago
might be a really strong motor for some machine if it was a big size :)
Greenkoman 2 years ago
Does PinHead know about this?
RamoneTalarico 2 years ago
try to put ur finger in it :)
khaled6100 2 years ago 20
it is fun to watch.
tuv45 2 years ago
rubic shfit solved into first gear
peanuttherat 2 years ago 2
lololol GEAR.. ..BOX!
nice..
kattejuice 2 years ago
All that and you have to turn the table with your hand?
keepitwildtv 2 years ago 38
ok thats quite a gear BOX... but yeah what does it do?
corotor12345 2 years ago
judging by the needle on top...it speeds up time
MyD1ckFlsLikCorn 2 years ago
it looks like an erecter set is it ?
shotglassproductions 2 years ago
Yes and no. Meccano owns the Erector name these days so when you buy an Erector set, you're really getting a Meccano one. Old Erector was originally a copy of Meccano and is different but not to the point of incompatibility.
paulidale 2 years ago
haha cool
CuteLittleBabyGirl 2 years ago
now where do i stick my finger first?
dermotk5 2 years ago 7
lol
Tapoze 2 years ago
wtf dose that thing do???
dm1069 2 years ago 3
Absolutely nothing.
paulidale 2 years ago
lool
Natreel 2 years ago
it's mechanical art.
rasoros 2 years ago
Supreme1Totally pointless machinery,excellent!!
GavinS1965 3 years ago
Hair + that thing = PAIN
But it looks cool
hitaradesona 3 years ago 5
not that good
Galacticmaster 3 years ago
If you listen to the motor for a while, it's almost like it sounds like a flock of birds. like a rainforest or something. just concentrate. it's cool
sistinewonder 3 years ago
It would be rather interesting to build one of these with the old meccano steam engines.
Dividend 3 years ago
Have NASA been in touch? Seriously, If you can build this you could have brought Apollo 13 home!
Tom
technologytom 3 years ago
I want this set. wow. Can you please inform me where i can buy such kits? i just want 100,000 pieces at my disposal and just create my own mechanical marvels. Please get back to me =)
DiffusionK 3 years ago
This wasn't built from a set.
However, if you want pieces, google for Meccano dealers.
paulidale 3 years ago
It's a borg stop-watch. ;)
ThomasGrillo 3 years ago 3
borg stop watch, that's hilarious
zx9ninelives2 3 years ago
YOUNEED TO FIX THE FLUX COMPACITOR
illegalprogram 3 years ago
What the hell is FLUX COMPACITOR??
But I think this thing is kind like ANOMALY PERFECTION..
banghelmi 3 years ago
flux capacitor is from a movie.. the device is used to travel in time. Have you seen back to the future?
Triple88a 3 years ago
Hahaha too much back to the future illegalprogram.
geoff390 3 years ago
GREAT SCOTT!!!
kylixer 3 years ago
why is everything so heavy, is there something wrong wrong with the earths gravitational pull?
humantestdummy 3 years ago 2
this is linux. lol
italianodicuore 3 years ago
you mean it works without crashing, falling over or catching a virus written by a four year old?
downwidcrapmusic 3 years ago
HAHA Yes!
Alucard7002 3 years ago
I agree " downwidcrapmusic ".
1995fordf150 3 years ago
hpw long did it take you to make it?
pikathebudgie1234 3 years ago
I don't know how much time I put into it. It was a few years ago now, but my best estimate is that it took less than a month to build and tune up. Of course, I was only working on it occasionally in the evenings.
paulidale 3 years ago
Thats really amazing, I should try one of those :).
serge933 3 years ago
Read the "About This Video" comments I wrote to find the closest thing to instructions I'll be writing.
paulidale 3 years ago
wow i seem to have stumbled upon aother subject matter to waste my entire life away on you tube with - lego and mechano models! at least this is related to my degree (mechanical engineering) as opposed to football etc. sweet invention id like to take up technic again some time i used to make some bad boy mechanisms as a kid :)
tomcull 3 years ago
What kit or kits did you use to make it. I think its very cool. How big is it and how much power does it need to work.
Thanks. Dave
HOTRODLED 4 years ago
I didn't use any kits, just lots of gears I've accumulated over the years. The holes are half inch (12.5mm) spacing, so overall it is just over 5.5 inches in each dimension.
As for power usage, it ticks over at about 1.5 volts and would have been running from circa 3 volts in the video. The motor I used was drawing a couple of hundred milliamps.
paulidale 4 years ago
it looks like a clock... lol
residentevil4fan4 4 years ago
If you'd read the description I posted, you'll see that is is meant to have its top resembling a clock face.
paulidale 4 years ago
I agree, comparing this to Lego is like comparing a paper plane with a TamJet plane..
NuclearReactions 4 years ago
It's cool... and comparing it with Lego just doesn't make any sense... There's no comparison when it comes to making engineering projects. Lego is like paint by numbers--Meccano is a blank canvas
HowardFair 4 years ago 2
cool metaphore
jakc234 4 years ago
lego is better but thats is cool (lego is so cool)
borde1770mar 4 years ago
Very nice. Suggested improvement: have the box actually rotate itself back and forth like it was turned manually in this video.
Odo987 4 years ago
good
Scenario2g 4 years ago
Fantastic! I've just got back into Meccano. This is an inspiration. Thanks for sharing it with us. Simon
shallowcoat 5 years ago
it would be really cool artwork if it wasn't so noisy
mentalmike99 5 years ago
thats cool, i like the skillfull spinning method for the filming :P
Unfathomable42 5 years ago
you should build transmissions
BeephLypz 5 years ago
Cool!
danesite 5 years ago