@NoMorePetro For the moment, I prefer stay anonymous for safety reasons so I've no webpage or other digital mean to publish open source more than I already open source on YouTube. Please note my channel provides much more open source details, design & theory than other sources, in particular many ZPE circuits are corrupted, do not work even if authors claim to.
@NoMorePetro Just add 2 extra isol-driver switches as explained in Part 2, it will work fine when you hit the hyper-resonance (magneto-acoustico-atomic resonance of the ferrite) so you'll generate much more anomalous reactive power self-amplification then convert part of it to real watts. The most difficult is really tuning the ferrite, not really LC diode plug tank neither IGBT driver boards ;)
@selfonlypath I would have to have the 8 isol-driver switches first to be able to just add 2 extra switches. I am currently waiting on some IGBTs that I ordered. Does this mean you are not going to have a part 4 where you show real power extraction? :(
@NoMorePetro don't worry, there will be part 4 with real power extraction ;) Please remember use diodeles IGBT for the diode plug otherwise it won't work. For H-bridge, it is OK use dioded IGBT or mosfet but they have to be few hundreds volts rated otherwise boom. Indeed to practice this tech, first H-bridge, 2nd diode-plug without extractor plug then finally extract. Tuning is such a bitch & requires lot of patience
Could an open source Arduino control board be used to digitally control the dark plug? It may be easier for others to replicate this if an Arduino board was used with open source software they can share.
Is the board design open source? If so, where can we see the schematic?
NoMorePetro 4 months ago
@NoMorePetro For the moment, I prefer stay anonymous for safety reasons so I've no webpage or other digital mean to publish open source more than I already open source on YouTube. Please note my channel provides much more open source details, design & theory than other sources, in particular many ZPE circuits are corrupted, do not work even if authors claim to.
selfonlypath 4 months ago
Where can I buy the mosfet driver board?
Very good tutorials. Thanks for all
crisroig2001 4 months ago
@crisroig2001 The board has been designed by Dan Combine and myself then Dan built 4 of them.
selfonlypath 4 months ago
Anxiously waiting for part 4, where you actually extract the power
NoMorePetro 4 months ago
@NoMorePetro Just add 2 extra isol-driver switches as explained in Part 2, it will work fine when you hit the hyper-resonance (magneto-acoustico-atomic resonance of the ferrite) so you'll generate much more anomalous reactive power self-amplification then convert part of it to real watts. The most difficult is really tuning the ferrite, not really LC diode plug tank neither IGBT driver boards ;)
selfonlypath 4 months ago
@selfonlypath I would have to have the 8 isol-driver switches first to be able to just add 2 extra switches. I am currently waiting on some IGBTs that I ordered. Does this mean you are not going to have a part 4 where you show real power extraction? :(
NoMorePetro 4 months ago
@NoMorePetro don't worry, there will be part 4 with real power extraction ;) Please remember use diodeles IGBT for the diode plug otherwise it won't work. For H-bridge, it is OK use dioded IGBT or mosfet but they have to be few hundreds volts rated otherwise boom. Indeed to practice this tech, first H-bridge, 2nd diode-plug without extractor plug then finally extract. Tuning is such a bitch & requires lot of patience
selfonlypath 4 months ago
@NoMorePetro
Same here.
minde4000 4 months ago
Lovely research! Are you discussing details at any forum? I would love to know the circuit details and transformer type for replication.
robbiehobbie47 4 months ago
Could an open source Arduino control board be used to digitally control the dark plug? It may be easier for others to replicate this if an Arduino board was used with open source software they can share.
ImJacksAmygdala 4 months ago