High-efficiency tri-cell electrolyzer assembly

[0ddba11s]

I have just posted one of my videos as a response to this due to your posting and the reply I have used. My testing was going towards 3 phase 3 frequency multi electrode my term TRIPHASIC.

[john29302]

thanks...iwas gonna use the plasti dip myself but since you seem the heads up i will deny that bum steer. i will soon release my design...it involves only leakage travelling 3 inches (weaving poly film on alternate plates...seems less than that hole there leaks....sinking stone goes glub glub glub

[mexiputah]

what about the positive and negative connections

[Yourfishman]

Very nice. i cant wait to try this nr myself. So your unit is now +nnnn-nnnn+nnnn- ?

How did you connect your wires?

[SmartScarecrow]

that appears to be a very nicely constructed device ... good luck with it ...

by the way, you will find that you really dont have to tighten them up that much ... with the wing nuts I use, finger tight is tight enough ...

[ardentscientist]

Thanks... I did notice that they do not have to be to tight. I just tighten enough and air pressure test. I still think maybe the Geocel may be the way to seal the intake holes. I will test to see how this holds up in electrolyte and heat with my first 16 plate wet cell. I believe it will hold up with my field experience with this product.

[SmartScarecrow]

let us all know please ... there are many looking for an inexpensive solution to this problem ... so far, best, cheapest, most reliable is the slit tubing ... but there must be a better way ...

looking forward to some production numbers ... she looks pretty good, but do she put out ???

[lutherp40]

Where does everybody keep finding all these cool materials to build with?

Looks like a very good dry cell. Very nice.

[ardentscientist]

NOTE: I added the three extra neutral plates and got rid of the plasti-dip. I guess others have had problems with this disolving in the electrolyte. I did add a slit poly tubing in the intake holes in place of the plasti-dip. The poly tubeing over the bolts are now 1.875". So 16 plates and about 6 more gaskets. This did not take long to do. As you can see this only took 9 minutes to assemble.