@AMET1013 Sure you can but you get better results if you size clean brass its better for the dies and the brass. Plus tumbling the brass that has been de primed... the media usually plugs the flash hole.. tumbling with not clean the primer pockets.
hi im going to be getting into reloading pretty soon for my glock 22. i always do a lot of researching on things that im unsure about. like for instance i heard that it is dangerous to reload 40 s&w for glock. but you dont say anything about that in your video. so im just wondering do you reuse your casings and do u trim them as well?.....thank you for the vid.
Hi, I'm just wondering about the amount of charge you were using on this video. 11.2 grain of Accurate #5? Is it not too hot? Basing on Richard Lee's Modern Reloading, that's the maximum charge for Accurate #7 for 135 grain jacketed bullet. Nice video though, very well presented. Thanks.
This load I have worked up slowly and have watched for signs of over pressure, I have not had any pressure signs at all. The load works great, is accurate and gives a little over 1250 fps with that charge from my glock 23C. Like always your gun and your lot of powder my give completely different results. You can see these very bullets being fired in one of my other vids. Thanks. Happy Reloading.
Thanks for your comment. I have experimented with pretty much all weights and bullets types from 135 up to 200 gn. I do really like the Hordady XTP's. The press is a Dillion RL550.
Great video one of the most descriptive I have seen on youtube yet. I am thinking of getting into reloading some 40SW like this video. Can you list one of everything I would need to start out for me as a beginner. Thanks
How many times can you reload the cases?? I'm going to be getting into reloading.
posjoey 1 week ago
couldnt you size and de-prime then put in tumbler? that way you clean the primer pockets out in one go?
AMET1013 3 weeks ago
@AMET1013 Sure you can but you get better results if you size clean brass its better for the dies and the brass. Plus tumbling the brass that has been de primed... the media usually plugs the flash hole.. tumbling with not clean the primer pockets.
IDBIGBORE4570 3 weeks ago
what's cost per round,bullet, powder, primer and what is cost of equipment?
Siguror6 1 month ago
why charge with powder before belling??
Siguror6 1 month ago
Nice job on this video
erikjames69 4 months ago
Very nice video and kudos for not talking during the powder stage.
Very nice setup, small, cozy and works!
497ball 4 months ago
hi im going to be getting into reloading pretty soon for my glock 22. i always do a lot of researching on things that im unsure about. like for instance i heard that it is dangerous to reload 40 s&w for glock. but you dont say anything about that in your video. so im just wondering do you reuse your casings and do u trim them as well?.....thank you for the vid.
SuperShooter03 6 months ago
what type of primer did you used for the 40 s&w large or small?
thuan123red 9 months ago
@thuan123red CCI 500. Its a small pistol primer.
IDBIGBORE4570 9 months ago
Hi, I'm just wondering about the amount of charge you were using on this video. 11.2 grain of Accurate #5? Is it not too hot? Basing on Richard Lee's Modern Reloading, that's the maximum charge for Accurate #7 for 135 grain jacketed bullet. Nice video though, very well presented. Thanks.
junpogie 1 year ago
@junpogie
This load I have worked up slowly and have watched for signs of over pressure, I have not had any pressure signs at all. The load works great, is accurate and gives a little over 1250 fps with that charge from my glock 23C. Like always your gun and your lot of powder my give completely different results. You can see these very bullets being fired in one of my other vids. Thanks. Happy Reloading.
IDBIGBORE4570 1 year ago
Thanks for your comment. I have experimented with pretty much all weights and bullets types from 135 up to 200 gn. I do really like the Hordady XTP's. The press is a Dillion RL550.
IDBIGBORE4570 1 year ago
Good Video on The reloading of the S&W 40 cal. alot of information.
what type of reloader/s do you use? Grain size 155 ? 160?
Tool19672 1 year ago
Great video one of the most descriptive I have seen on youtube yet. I am thinking of getting into reloading some 40SW like this video. Can you list one of everything I would need to start out for me as a beginner. Thanks
snake39B 1 year ago