DIY Water Ionizer

[silentgi771]

spend a couple bucks online for a water tester that can detect such things, I would not drink any homemade water without first testing it for contaminants

[artsychic2000]

Hi! Thanks for taking the time to make such a good, informative and clear video. I definately will build one of these. I'm looking @ buying .999 pure titanium bullion buffalo bars off ebay. Would you think those exceptable? Seems to me their rigidity would make them easier to clean from anything that might build up over time. Thanks again!

[silentgi771]

@artsychic2000 the larger the electrode the more watts needed, from my experience.

[artsychic2000]

@silentgi771 I make colloidal silver much the same way...i use silver ingots. I can use 2 or three 9 volt batteries in series and get a reaction. Can't imagine it's that much different

[silentgi771]

@artsychic2000 I use 10 gauge 99.99% pure silver rods along with distilled water in a pyrex dish at near boiling point to make colloidal silver, also 9v

[artsychic2000]

@silentgi771 i did do a search for the titanium silver you were using and couldn't find much beyond tape. I would appreciate knowing the sellers name if you still have it. This is by far the clearest explanation i've seen on making a water ionizer i've seen. I thankyou for taking the time. Too many people are sick from the dirty water they make us drink. Do you believe it will take barium and alluminium out? What would you do otherwise?

[silentgi771]

have to have a way to separate the tanks only allowing water to pass through the sponge, there are other designs

[thedood73]

why can't you use a bigger container with two holes instead of trying to join/seal two together.seems like unecessary hassle...?

[phd5753]

I bought them from the seller name "hst2010" for $4.25 ,freeshipping. I don't make judgement ! You shared your knowlge to me, I return the favor, that's all. If I damaged your ego, I sincerily apologize to you.

[silentgi771]

@phd5753 My ego is intact, thank you :) I shared my knowledge and you returned the favor by posting intentionally false information (some may call that lying). You said, and I quote " I found out that the one you and I bought containing aluminium". I asked you to verify this by providing the metallurgical designation of my material showing it is an alloy containing aluminum. I understand your health concern and AGREE but don't discredit yourself by posting false information.

[buttonspiderful]

@silentgi771

Hi,

I have been able to scrounge a set of electrodes from a swimming pool chlorinator. I am going to build mine based on your basic instructions which are fantastically simple but very clear. When I have results I will certainly let you know. I will let you know exactly what I used.

[united4mi]

@silentgi771 hi all, could stainless steel 364 type!! be used and how long doe,s the water last onced charged, should ti be dranck straight away?? regards chris

[united4mi]

@united4mi ps, hi again, your using a 12v dc,, and how many???

[buttonspiderful]

@silentgi771

How long does it take to complete its process. I am going to use two 5 gallon plastic containers. The power supply is 9.5v 1500 ma power supply.

[phd5753]

thank you for making this beatiful video. I saw this video, I bought titanium electroke from Ebay as you said, then I investigated titanium grades, I found out that the one you and I bought containing aluminium which causes alzheimer desease ! Please check out the grades before continue using it. It's dangerous for your health. I bought a different grade pure titanium to use. If you still want to use it, you should design a way to filter aluminium out before drink it.

[silentgi771]

@phd5753 How do you know what titanium I bought and are using? Please specify the designation of the metal and mixture if it is an alloy you think I'm using. Simple test of the water allow you to judge for yourself contamination levels. Thus far the water I produced tested to be vastly superior to bottled water and not far off reverse osmosis water. Thanks for your concern, hopefully the people that make these express good judgement as I have providing multiple warnings. Anyone who reads this...

[MegaMultijoe]

@silentgi771

Hi,

very good and simple design, much appreciated you sharing the info.

How ever i can't find the containers your using, any chance of more info .

Thanks.

[sheltonation]

@MegaMultijoe New Wave Enviro Eastar Resin Refrigerator Bottle, 2-Gallon

[sheltonation]

@MegaMultijoe ^ get that at amazon $15

[silentgi771]

@phd5753 send phd5753 a message, he wants to help.

[ae86miami]

How often should u change out the acidic water? When the process is complete? What about the sponge does it go bad like moldy or anything?

[indyproject]

what kind of containers are those? I found several but not like those.. and are they 2 gallons or more? thanks

[chemicalsweet13]

this is the best design I've seen so far on youtube. It is certainly the most clinical I've seen. Great video. I'd be quite keen to see your latest model.

[GreenLearning]

This is an easy setup. I like it. My setup (see my video) makes it on the fly as its needed because I have to make a lot for the garden. However, I need to find a platinum coated electrode.

[snakeyesxlaw]

Good stuff! Which ceramic ionizer did u go with on eBay?  There are so many different models to choose from or which ionizers would u recommend?

[CANvsDK]

This is really great im going to make this tomorrow

[1stutubuzer]

How could I buy you titanium electrode in Vietnam? Thanks and have a nice day!

[CANvsDK]

@1stutubuzer hahah i guess online then