Nutnfancy needs to gently sway Kershaw into some FFG blades.Chinese and American. Cold Steel went to FFG to try and compete with Spydercos and because Nut and his subscribers love the full flat grinds.
Must Wave this knife. It is screaming for it! Just take thumplate off,Dremel spine and then reinstall thumb plate. I LOVE Ron Paul and his foreign policy.And his social and tax policies.
i'll be honest.i got this knife because i purchased it a a pricepoint that was definitely NOT negotiable.$20 shipped.the blade shape is ugly,let's be honest.mine is serrated.i put grip tape on the thumb plate,the jimping is one of the best I've seen tho.it's a maaad piercer!i thumped THROUGH 1.5 inch wood EASY!the scallop serrations are wickedly sharp and even though it's ugly as sh** imo,i'll edc this..!i own the chill and almost every knife you reviewed, i like it as what it is. ugly-great
just got this knife, love it, $21 bucks shipped. only beef is one of the pocket clip screws is totally stripped out, so im gonna have to leave it in the tip down position. other than that its a phenomenal knife for the money.
hey nutn, do you think any of the new kershaw line up blades would make not only a good edc, but also a tactical blade? i thought about the Skyline, but what do you think?
The blade design mirrors that of one of the most successful kershaw's made the scallion. That put kershawnon the map for me at least. Love the blade, another home run Kershaw ;-)
Bought as an EDC/utility knife. Great jimping. Thumb plate feels too close to the folding axis and takes some getting used too. Clip is tight on pocket but does ride low. Had it just over a week and seeing rust forming on blade. I can't lap on oil for a pocket carried folder... Anyone else have this problem with the bead blasted? The OKC Joe Pardue Utilitac is a better choice for about the same price.
Just got mine. Big 5 $19.99. I'm really impressed with the quality and especially the lockup at this price. Some other knives at this price that I looked at were JUNK. My only beef with the Nerve is the pocket clip is REALLY tight and starting to wear out my pants pocket, but that's just nitpicking
one thing on mine that was odd is that the pivot screw is super tight and i cant get out ir adjust..... never seen this before in kershaw.... gonna try to heat the female side see if it loosens. Like nutn always says just a data point
I bought this knife a few months ago and i think is awsome and sleek lookn. Like you, i wasnts sure about the thumb plat its was my first knife like that. I really like it, in fact i can even wave the knife with the thumb plat so im loving that. It keeps a great edge myself but thats me.
Oh yes, I remember shot show. DOES IT HAVE SCISSORS!!! *snicker snicker* PFI dude, PFI dad?! *snicker snicker* SCISSORS?!
I'm surprised the leatherman guy didn't slap you. I would have. Don't get me wrong, I like you, you have a lot of good stuff. But the leatherman booth, I got down right upset with how you presented yourself. And as you say, 'I'm just saying it like it is' and I am here, in this comment, saying what I thought about that.
Hey nutnfancy i love how your reviewing blades that are less than 40$. it helps me choose a quality blade in a lesser price range. thanks to you i have already purchased this knife and a ka-bar dozier design hunter a byrd caracara2. and now i can circulate the usage of my knives. through your vids i'm done with s&w. now i'm carrying a sog flash1 for utility and a spyderco endura4 ffg for emergency tactical defense. great vids man keep it up more power...
China is perfectly capable of producing products that are good as anywhere in the world... The only reason why some of the products that come out of there are poorly made is because the U.S. Corporations want to maximize profits. Which means using cheap materials in their product. People can blame the U.S. corporations for poor quality products coming out of China. I'm an American-born Chinese person and I hate how the topic of China products being cheap turns into a racial attack.
Always love the whip and the nerdy-accent. Man, Kershaw has made a good lineup. Definitely will pick up an EDC, probably leaning to a larger one for tactical use perhaps. Thanks for sharing! I like the magnifying glass because it does not have the issues of laggy focus and it gives a little sneak peak of Nutn's reflection and setup.
another great review nutn, but i cant get myself turned on to most kershaws anymore because they never have full flat grind, and they usually have strangely shaped weak pocket clips. I have bent several clips out on my scallion, leek, and chive BUT every single time i email kershaw telling them what happened and 2 days later i get a few more in the mail. Thats great customer service! Hey nutn keep up the good work, dont ever change!
Yo nutn. Ive noticed you never mention this, so im not sure if youre aware, but the reason why knives are hollow ground is not to primarily make knives lighter nor is it done to make them sharper. Its because hollow grinding is cheaper as it can be done on large grinding wheels rather than on a more expensive to maintain belt grinder
I wonder when Nutn will reach the point where all the "homemade" SFX, hokey pronounciations and slips of tounge culminate into incomprehensible gibberish.
I've had mine for well over a year now, and I agree, it's a great all around user knife. The unconventional blade shape is the only drawback, IMO - and then it's just an aesthetic issue. Great tip, good ergonomics, tough construction, COOL handle scales - all make it a great knife for the price, and awesome for EDC.
" Knife suck cuuz its made in china Nutin"...as if!!! Like everything thats made in Germany is great...wrong. u could say the same about whats made in japan its got such a possitive stigma for the past made swords and knives that have florished...where did we get this all or nothin attitude? thats not what we fought for, HAPPY MEMORIAL DAY, luv ya nutn
Hey Nutn whats your take on using serrated blades in a combat roll. It is outlawed in war because of the damage it can do. As an "emergency defense" blade would you care if it had serrate? Just like to hear your opinion and ideas on the subject. Thank you and keep up the good work.
A little too much caffeine, Nutn? lol. Seriously though great review (as usual)! Oh, and never get rid of the whip noise! It's just so... "Nutnfancy"...
@nutnfancy Thanks Bro! We can't wait to see what you have in store...I sure enjoy watching your knife vids, keep up the great work and thanks got your service to our great nation!
Like these knives. Don't like the clip angle on the tip up carry. However, I could probably get use to it. I find with many knives and their oddities, I become used to them.
im totally against serrations. if your bladhe isnt sharp enough to cut through a seatbelt, then its probably a pencil that your using. serrations always get in the way
@nutnfancy you probably wont read this, but i had an idea of maybe putting the serrations at the tip of the blade like on a steak knife. idk i have never tried that, but then maybe you will be able to widdle with the knife because its plain at the base, and maybe the serrations at the tip could help keep a fish from squirming away after you spear them? who knows im probably wrong haha
Actually bought this knife almost a month ago and I love it. The shape and overall look is great, I like that they went with the plate instead of the thumbstud (Sometimes you just want variety) and I have had no issues with the plate getting stuck in my pocket as an earlier commenter predicted. I don't mind the weight and it was pretty sharp out of the box too. The only problem I had was with the clip which became loose easily.
Simply getting a close-up with your camera enlarges the knife image much better and bigger than the magnifying glass. The mag-glass pretty much...doesn't do it. IMO
@nutnfancy Try investing in a jewelers glass. I've seen another user use it in their videos and it really does the trick over a large magnifying glass, including extremely high detail of the blade up close. You just put the jewelers lens over the camera's iris and it works great.
Hey nutnfancy I think it would be awesome if you would do some reviews of your favorite knives at like the $100 price point. Not that I don't like the high value options that you are putting out, just like to learn more about the higher dollar options also. Thanks for all the great reviews, you are making me a knife junkie!
nutnfancy you should check out any of the Spartan knives they have been in a few magazines but there a smallish business so not many people know about them. Both the designers were special forces, marines and army.
hey nutn i dont know if you get asked this alot but could you ever do a review on your gun safe like you wouldnt have to show any of your personal items but maybe show the storage, how big it is, the weight ect.... ya i think that would be a cool vid.
OMG! I was just looking at this knife on the way home from work. I stopped by Walmart to get some Shoe Goop. And I was about to pull the trigger on a new knife. Unfortunately all walmart has now is pictures of the knives they carry you have to get an associate to retreive the dangerous knife for you (oh and good luck finding someone) But for some reason the picture and price of the Nerve caught my Attention. IT MUST HAVE BEEN AN OMEN!
@anestischatzibeis They didn't switch the MULE is still made in Taiwan out of AUS8 steel, the new G10 MULE is mad in China, out of 3CR13 Steel, essentially equivalent to 420 Stainless. It is a shame, as long as they never change their fighting knives (mainly USMC) though, I don't care.
@anestischatzibeis No there wasn't a change, just a new product that is different. AUS8 is not equal to 440. 3CR13 is a more similar steel to 440. 440 and 3CR13 are both Chinese steels.
@RuthlessZabusa hmmm new product...its kabar mule.if you go on ebay to buy this cool blade,you ll buy now a cheap version with steel similar to 420J not 440 b or c as before.of course its a downside.AUS 6 is similar to 420J and aus8 to 440 b and C.just checked to be sure ;-) 3CR13 is 420 similar.personaly i m buying only 440c-aus8 folding knives.except victorinox ofcourse
i just bought this knife a few days ago...and as soon as i did i looked for a nutnfancy review and it wasn't there...and look here it is lol thanks nutn love the reviews and i am also very happy with this knife been carrying it since i bought it
TNP! Never say that the whip noise is stupid!!! It's that very sound that helps us loyal followers prepare for something amazing to hit the camera, and as always AMAZING job keep it up Nut'n!
Im not a fan of the blade shape or the thumb place, but everything else seems good. Typical kershaw. Those serrations are my favorite though without a doubt. I would hate to have to sharpen them tho...
I love the old style knife reviews. And by the way I love the whip noises lol. For the people who dont I dont understand why. One of my favorite parts of TNP is Nutn's personality. Its what makes your chanel different. The atmosphere is just a type of fun you would have with a best friend. So keep doing the whip noise, being brutally honest, and saying "jimping", "tactical", "excellent" and "phospher bronze bushings" the way way you do. Its what keeps me coming back.
I guess I'm not a Kershaw guy cause this is yet another kershaw that doesn't blow my hair back. I really don't like the the blade shape and the deployment stud is really obnoxious and ugly. The offerings from spyderco and cold steel are more appealing to me. But, I love you Nutn and you still gave us a great video. Love your humor, passion and goofy sound effects. Love it when you do or say something funny then make fun of yourself.
@R1DDL3R666 Try Heinnie Hayes, they are a Uk company, their prices aint too bad, and the service is excellent. Plus they have lots and lots of knives to choose from :)
i just got one and i think it's great but the only thing i don't like about it is that the clip is kind of stiff
ALEX19066 1 month ago
Nutnfancy needs to gently sway Kershaw into some FFG blades.Chinese and American. Cold Steel went to FFG to try and compete with Spydercos and because Nut and his subscribers love the full flat grinds.
ITSMETHEFLASH 1 month ago
Must Wave this knife. It is screaming for it! Just take thumplate off,Dremel spine and then reinstall thumb plate. I LOVE Ron Paul and his foreign policy.And his social and tax policies.
ITSMETHEFLASH 1 month ago
This has been flagged as spam show
i'll be honest.i got this knife because i purchased it a a pricepoint that was definitely NOT negotiable.$20 shipped.the blade shape is ugly,let's be honest.mine is serrated.i put grip tape on the thumb plate,the jimping is one of the best I've seen tho.it's a maaad piercer!i thumped THROUGH 1.5 inch wood EASY!the scallop serrations are wickedly sharp and even though it's ugly as sh** imo,i'll edc this..!i own the chill and almost every knife you reviewed, i like it as what it is. ugly-great
PaiRaiUno 2 months ago
Bought one off ebay 15 dollars with shipping included razor sharp I use it for EDC great knife small price
revolver8shot 3 months ago
kershaw need to start making rj blades out of better steel and in the USA RJ deserves better than china cheap steel
deecoop0351 5 months ago
Love these type of reviews this is why i watch your channel.. Keep them comming
sebenza100 5 months ago
just got this knife, love it, $21 bucks shipped. only beef is one of the pocket clip screws is totally stripped out, so im gonna have to leave it in the tip down position. other than that its a phenomenal knife for the money.
SurvivalInFlames 5 months ago
hey nutn, do you think any of the new kershaw line up blades would make not only a good edc, but also a tactical blade? i thought about the Skyline, but what do you think?
wleivdal 5 months ago
Just picked up one at Big 5 for 19 + tax. At that price point its a great knife.
WelcomeHome76 6 months ago
WTF I got mine for 40 not 25
Reclaimer1995 6 months ago
The blade design mirrors that of one of the most successful kershaw's made the scallion. That put kershawnon the map for me at least. Love the blade, another home run Kershaw ;-)
Tel1sps 7 months ago
This was my first Kershaw knife as of 4 hours ago lol love it so far it's just so darn sexy :D
9azzao 7 months ago
Me: "Babe... I need this knife"
Wife: "Why do you NEED another knife"
Me: ".... uh.... "
Thanks a lot for the blade addiction Nutn :o) Love my Kershaw Nerve!
702ghostrider 8 months ago
@702ghostrider Ask her why she needs another pair of shoes.
WetSocks97 3 months ago
Looks like Nutnfancy has been watching Austin Powers lately.
"You want some chocolate Mini Me?"
Haha nice review Nutn
xCaffieneJunkyx 8 months ago
Bought as an EDC/utility knife. Great jimping. Thumb plate feels too close to the folding axis and takes some getting used too. Clip is tight on pocket but does ride low. Had it just over a week and seeing rust forming on blade. I can't lap on oil for a pocket carried folder... Anyone else have this problem with the bead blasted? The OKC Joe Pardue Utilitac is a better choice for about the same price.
wrenchpower 8 months ago
Very excited to see this knife, one of my favorites, just because its so damn fast.
aHippieWithKnives 8 months ago
Damn. Nutn. I'm going through and watching all these videos. What makes Kershaw's so beautiful?
wangwee3 8 months ago
So many good reviews, must be nice to get all these nice things sent to u to do reviews on...
BizerkOn3 8 months ago
This has been flagged as spam show
big 5 has it for $19 picked one up 2 days ago
peterngdotcom 8 months ago
Comment removed
peterngdotcom 8 months ago
Just got mine. Big 5 $19.99. I'm really impressed with the quality and especially the lockup at this price. Some other knives at this price that I looked at were JUNK. My only beef with the Nerve is the pocket clip is REALLY tight and starting to wear out my pants pocket, but that's just nitpicking
Way to go Kershaw!
remus5 8 months ago
@remus5 i very carefully bend it so it wasnt so tight
peterngdotcom 8 months ago
Hey nutn you might have already done it but what do you think of the Kershaw blackout?
smokybob63 8 months ago
i wish i could put the volt blade on the nerve handle
faction69 8 months ago
OLD SCHOOL VIDEO
love it.
Smith28Adventure 8 months ago
Also got one at big 5 good buy @ 20$
one thing on mine that was odd is that the pivot screw is super tight and i cant get out ir adjust..... never seen this before in kershaw.... gonna try to heat the female side see if it loosens. Like nutn always says just a data point
kchee1111 8 months ago
S of a B this wasn't in my sub box. Great video!
brandonbriggs 8 months ago
Got mine on sale at Big 5 for 19.99, decent knife
mrpicky510 8 months ago
JIMPAAAANNNNGGGG!!!!!
-JD
JAYDEE44 8 months ago
i got one of these and its my edc knife and its great. it comes out very sharp
kakushinumber1friend 8 months ago
i got one of these and its my edc knife and its great
kakushinumber1friend 8 months ago
Phoshpher Bronsh Bushingsh!
oshkoshbjosh986 8 months ago
I bought this knife a few months ago and i think is awsome and sleek lookn. Like you, i wasnts sure about the thumb plat its was my first knife like that. I really like it, in fact i can even wave the knife with the thumb plat so im loving that. It keeps a great edge myself but thats me.
bbram000 8 months ago
Oh yes, I remember shot show. DOES IT HAVE SCISSORS!!! *snicker snicker* PFI dude, PFI dad?! *snicker snicker* SCISSORS?!
I'm surprised the leatherman guy didn't slap you. I would have. Don't get me wrong, I like you, you have a lot of good stuff. But the leatherman booth, I got down right upset with how you presented yourself. And as you say, 'I'm just saying it like it is' and I am here, in this comment, saying what I thought about that.
You're better, you can act/be better.
happysplodie 8 months ago
Hey nutnfancy i love how your reviewing blades that are less than 40$. it helps me choose a quality blade in a lesser price range. thanks to you i have already purchased this knife and a ka-bar dozier design hunter a byrd caracara2. and now i can circulate the usage of my knives. through your vids i'm done with s&w. now i'm carrying a sog flash1 for utility and a spyderco endura4 ffg for emergency tactical defense. great vids man keep it up more power...
moab123456 8 months ago
Nutnfancy, I am not aiming that message towards you. It's for those people who make assumptions. lol
OrangePHX 8 months ago
China is perfectly capable of producing products that are good as anywhere in the world... The only reason why some of the products that come out of there are poorly made is because the U.S. Corporations want to maximize profits. Which means using cheap materials in their product. People can blame the U.S. corporations for poor quality products coming out of China. I'm an American-born Chinese person and I hate how the topic of China products being cheap turns into a racial attack.
OrangePHX 8 months ago
i love the fades
tacokiller101 8 months ago
Always love the whip and the nerdy-accent. Man, Kershaw has made a good lineup. Definitely will pick up an EDC, probably leaning to a larger one for tactical use perhaps. Thanks for sharing! I like the magnifying glass because it does not have the issues of laggy focus and it gives a little sneak peak of Nutn's reflection and setup.
ArmedVegan 8 months ago
another great review nutn, but i cant get myself turned on to most kershaws anymore because they never have full flat grind, and they usually have strangely shaped weak pocket clips. I have bent several clips out on my scallion, leek, and chive BUT every single time i email kershaw telling them what happened and 2 days later i get a few more in the mail. Thats great customer service! Hey nutn keep up the good work, dont ever change!
PR0MARK1 8 months ago
Hey Nutnfancy! I can't believe you had, "THE NERVE," to review this knife. Budum chi! :D
MrDocProfHe 8 months ago
Yo nutn. Ive noticed you never mention this, so im not sure if youre aware, but the reason why knives are hollow ground is not to primarily make knives lighter nor is it done to make them sharper. Its because hollow grinding is cheaper as it can be done on large grinding wheels rather than on a more expensive to maintain belt grinder
fartx211 8 months ago
I've got a problem with my StormII---I LOST IT!!
BANG MY FACE WITH YOUR TABLE NUTN!
vassal11 8 months ago
I wonder when Nutn will reach the point where all the "homemade" SFX, hokey pronounciations and slips of tounge culminate into incomprehensible gibberish.
Nice review otherwise.
kaizoebara 8 months ago
6:50 again with the nutnfancy Sootch00 impression
TacticalCWAT 8 months ago
Yay a vid that is not 50 minutes! lol Good vid, looking to purchase this soon. Keep these short and sweet vids coming!
razio54 9 months ago
Good review, I am surprised you have a knife with serration's .
millster101 9 months ago
I've had mine for well over a year now, and I agree, it's a great all around user knife. The unconventional blade shape is the only drawback, IMO - and then it's just an aesthetic issue. Great tip, good ergonomics, tough construction, COOL handle scales - all make it a great knife for the price, and awesome for EDC.
TheLateBoyScout 9 months ago
"Que stupid whip sound"
Freakin hilarious....LMAO
divotit 9 months ago
" Knife suck cuuz its made in china Nutin"...as if!!! Like everything thats made in Germany is great...wrong. u could say the same about whats made in japan its got such a possitive stigma for the past made swords and knives that have florished...where did we get this all or nothin attitude? thats not what we fought for, HAPPY MEMORIAL DAY, luv ya nutn
chefdlb 9 months ago
Hey Nutn whats your take on using serrated blades in a combat roll. It is outlawed in war because of the damage it can do. As an "emergency defense" blade would you care if it had serrate? Just like to hear your opinion and ideas on the subject. Thank you and keep up the good work.
stormmaster01 9 months ago
A little too much caffeine, Nutn? lol. Seriously though great review (as usual)! Oh, and never get rid of the whip noise! It's just so... "Nutnfancy"...
Symbiot5 9 months ago
@nutnfancy Thanks Bro! We can't wait to see what you have in store...I sure enjoy watching your knife vids, keep up the great work and thanks got your service to our great nation!
15569903 9 months ago
Like these knives. Don't like the clip angle on the tip up carry. However, I could probably get use to it. I find with many knives and their oddities, I become used to them.
Cr0cket20 9 months ago
@Cr0cket20 Hey buddy. Thanks for weighing in. The value is smokin' on the Nerve and like you say, you can get used to things.
nutnfancy 9 months ago
im totally against serrations. if your bladhe isnt sharp enough to cut through a seatbelt, then its probably a pencil that your using. serrations always get in the way
garrettzkool63 9 months ago
@garrettzkool63 I love the plain edges too...I think it comes down to a matter of sharpening usually.
nutnfancy 9 months ago
@nutnfancy you probably wont read this, but i had an idea of maybe putting the serrations at the tip of the blade like on a steak knife. idk i have never tried that, but then maybe you will be able to widdle with the knife because its plain at the base, and maybe the serrations at the tip could help keep a fish from squirming away after you spear them? who knows im probably wrong haha
garrettzkool63 9 months ago
Love the redneck voice ROFL
altmegido 9 months ago
Actually bought this knife almost a month ago and I love it. The shape and overall look is great, I like that they went with the plate instead of the thumbstud (Sometimes you just want variety) and I have had no issues with the plate getting stuck in my pocket as an earlier commenter predicted. I don't mind the weight and it was pretty sharp out of the box too. The only problem I had was with the clip which became loose easily.
Paniro123 9 months ago 5
@Paniro123 Great comment...thanks for your experience. It helps fortify the information here.
nutnfancy 9 months ago 6
@nutnfancy Also notjustknives changed the name to Blitz just in case anyone was searching and couldn't find it.
Paniro123 9 months ago
Simply getting a close-up with your camera enlarges the knife image much better and bigger than the magnifying glass. The mag-glass pretty much...doesn't do it. IMO
LVPG2010 9 months ago
@LVPG2010 Good to know, thanks man.
nutnfancy 9 months ago
@nutnfancy Try investing in a jewelers glass. I've seen another user use it in their videos and it really does the trick over a large magnifying glass, including extremely high detail of the blade up close. You just put the jewelers lens over the camera's iris and it works great.
billyshob 9 months ago
@nutnfancy perhaps a jewlers loupe would be more effective.
JackedLobster 9 months ago
the WAPOOOOOSHSHSHSHSHS is awesome put more of those in there
10Caios 9 months ago 29
Hey nutnfancy I think it would be awesome if you would do some reviews of your favorite knives at like the $100 price point. Not that I don't like the high value options that you are putting out, just like to learn more about the higher dollar options also. Thanks for all the great reviews, you are making me a knife junkie!
15569903 9 months ago
@15569903 Higher dollar offerings are on the reviewing plate. I will cover a lot of different options. Some real sick fixed blade options coming up.
nutnfancy 9 months ago 6
love the sound effects. thanks for the vid nutn =]
todesengel301 9 months ago
nutnfancy you should check out any of the Spartan knives they have been in a few magazines but there a smallish business so not many people know about them. Both the designers were special forces, marines and army.
ridgearice149 9 months ago
hey nutn i dont know if you get asked this alot but could you ever do a review on your gun safe like you wouldnt have to show any of your personal items but maybe show the storage, how big it is, the weight ect.... ya i think that would be a cool vid.
techdeckdude4 9 months ago
OMG! I was just looking at this knife on the way home from work. I stopped by Walmart to get some Shoe Goop. And I was about to pull the trigger on a new knife. Unfortunately all walmart has now is pictures of the knives they carry you have to get an associate to retreive the dangerous knife for you (oh and good luck finding someone) But for some reason the picture and price of the Nerve caught my Attention. IT MUST HAVE BEEN AN OMEN!
ironmonkeyz 9 months ago
i don't like that ka bar models went from aus 8 to this chinese steel.i ve heard that its softer and can't hold edge.
anestischatzibeis 9 months ago
@anestischatzibeis They didn't switch the MULE is still made in Taiwan out of AUS8 steel, the new G10 MULE is mad in China, out of 3CR13 Steel, essentially equivalent to 420 Stainless. It is a shame, as long as they never change their fighting knives (mainly USMC) though, I don't care.
RuthlessZabusa 9 months ago
@RuthlessZabusa yes you re right,but aus8 I think its equivalent to 440 stainless.so the change is a downside.
anestischatzibeis 9 months ago
@anestischatzibeis No there wasn't a change, just a new product that is different. AUS8 is not equal to 440. 3CR13 is a more similar steel to 440. 440 and 3CR13 are both Chinese steels.
RuthlessZabusa 9 months ago
@RuthlessZabusa hmmm new product...its kabar mule.if you go on ebay to buy this cool blade,you ll buy now a cheap version with steel similar to 420J not 440 b or c as before.of course its a downside.AUS 6 is similar to 420J and aus8 to 440 b and C.just checked to be sure ;-) 3CR13 is 420 similar.personaly i m buying only 440c-aus8 folding knives.except victorinox ofcourse
anestischatzibeis 9 months ago
"cue stupid whip sound" lmao!
tamaplayer22 9 months ago
4 people hate the WAPOOOOSHHSSSSHHSSSHSHS
stuttterbuttter 9 months ago 21
someone's a little gitty.
thaddeusabear 9 months ago
whapooshsssshhshshs! welcome.
thaddeusabear 9 months ago
hahaha "cue stupid whip sound - wh'chhhhhhhhhhh"
aznelite325 9 months ago
Ha ha right after Nutn did the "southern accent", you tube advertised Randy Travis!
Blessedhart 9 months ago
Nutn has the greatest southern impersonations, and I'm from the south LOL!!
stnls1911 9 months ago
aparentley jimping = tactical in the nutnfancy ideology
jackeddemon 9 months ago
@jackeddemon Absolutely not
albi131 9 months ago
"que stupid whip sound: kachuuuuuh"
love your revues nutn, keep em coming =)
emb876 9 months ago
The Chill is awesome.
2 oz @ a slim 3 inch blade? VERRY NICCE.
Good EDC at a pretty good price point.
dahgutone 9 months ago
Cool review, I would like to see the Kershaw Rake review, I know u like that knife lol
thelockkk 9 months ago
i just bought this knife a few days ago...and as soon as i did i looked for a nutnfancy review and it wasn't there...and look here it is lol thanks nutn love the reviews and i am also very happy with this knife been carrying it since i bought it
manofsteele8454 9 months ago
I carry the Kershaw skyline. How does it feel in comparison? TNP baby for life!!
JD update: currently obtaining my backpacking system. Kelt Super tioga in the mail!! Do you speak TNP?!¡!
JAYDEE44 9 months ago
TNP! Never say that the whip noise is stupid!!! It's that very sound that helps us loyal followers prepare for something amazing to hit the camera, and as always AMAZING job keep it up Nut'n!
19Kettle93 9 months ago
Comment removed
judofry 9 months ago
I like the old school format
jln6701 9 months ago
terrible serrations
auradud3 9 months ago
If Kershaw is going to use this type of thumb opening device, then why not make it so it can be waved off the pocket???
YourMilageMayVary 9 months ago
As always, great review, but why did I get an ad for makeup before a Nutnfancy video?
theoriginalca7erham 9 months ago
That thumb stud "shelf" is mad ugly. It seems (visually) like it would catch in the pocket as the knife is drawn. I dunno.
I like the subdued pocket clip design, although prefer 3-screw clips over 2 screws.
classof77 9 months ago
What are "wizard of oz issues"?
UnitedStatesOfMoney 9 months ago
@UnitedStatesOfMoney Stuff that looks goofy.
NifoOtiBoy 9 months ago
Great way to end a vacation, a review by Nutnfancy!
MusicalWeasel 9 months ago
Im not a fan of the blade shape or the thumb place, but everything else seems good. Typical kershaw. Those serrations are my favorite though without a doubt. I would hate to have to sharpen them tho...
05AltimaSER 9 months ago
I love the old style knife reviews. And by the way I love the whip noises lol. For the people who dont I dont understand why. One of my favorite parts of TNP is Nutn's personality. Its what makes your chanel different. The atmosphere is just a type of fun you would have with a best friend. So keep doing the whip noise, being brutally honest, and saying "jimping", "tactical", "excellent" and "phospher bronze bushings" the way way you do. Its what keeps me coming back.
strongondefense45 9 months ago
I guess I'm not a Kershaw guy cause this is yet another kershaw that doesn't blow my hair back. I really don't like the the blade shape and the deployment stud is really obnoxious and ugly. The offerings from spyderco and cold steel are more appealing to me. But, I love you Nutn and you still gave us a great video. Love your humor, passion and goofy sound effects. Love it when you do or say something funny then make fun of yourself.
OfficerPaterFamilias 9 months ago
hey nutnfancy do you know any US knife websites that will ship cheap to the UK?
R1DDL3R666 9 months ago
@R1DDL3R666 Try Heinnie Hayes, they are a Uk company, their prices aint too bad, and the service is excellent. Plus they have lots and lots of knives to choose from :)
zednotzee7 9 months ago
I feel lucky because we got a fade at the end.
DerRelienT 9 months ago
Love the triple jimping on the handles. Is there a reason you went with the combo edge?
donotstealmythunder 9 months ago
@donotstealmythunder Kershaw serrations are nearly the only serrations nutnfancy likes.
Kylef7735 9 months ago
@Kylef7735 I know that. Just wanted to hear read his answer.
donotstealmythunder 9 months ago
@donotstealmythunder i use heinnie hayes ther in the uk and have loads of knives.
Crimsonshadow89 9 months ago
"I hayt et nutn'fancy, that knyf suks" LOL.
Im not feeling the blade design on this one but the rear texture/jimp would be pretty nice for control.
MrHaun 9 months ago
fail
sunny789123 9 months ago
I LOVE KERSHAW
ManFromHongKong828 9 months ago
first
warriormusashi 9 months ago
woah!
icecoffeeenthusiast 9 months ago