How to use the Airless Sprayer available from Crown Hire

[wesleytarbuck]

standard tip leaves a hard edge when dry on every spray stroke, and you can see it on an angle every time when light runs across the surface, i dont know why people use standard tips, maybe inside cupboards or cornice, but even then, still too much overspray, fine finish tips stop all this.

[PainterForHireVids]

great vid

[americanfinefinish]

I feel sorry for that airless.. Its working to hard...

[ANTONIVSLVCIVS]

WOW

I want to buy one Airless Sprayer like this very soon.

[partyongarth420]

i hate when people bitch about peoples painting styles lol./ wrong angle... u cant paint sideways with the roller plus up and down... bullshit.. ... going up and down or side to side with the roller dosnt matter...; what matters is not cutting to many lines close together with the sprayer or roller cause gravity takes it slightly and it gets noticeably thick..and these painters always have time for touch ups

[wallshuttle]

New DIY paint and wallpaper tools:wall shuttle

[Bcroft39]

I like graco, but you can't beat Titan equipment. They all have nice equipment. It just depends on the one you prefer.

[holmesdec1]

probably a nice spray machine though I use and prefer Graco but his technique needs work though for anyone wanting to paint large areas fast get hold of and airless machine some instruction on how to use it and clean up etc and have fun

[theelinventore]

that guy is speed white gonzales...is mean fast

[takimakikaki]

@theelinventore yeah but he needs to keep more distance to the wall

[UpTick21]

Great job!!!!!

[kwlincoln]

technically his technique isn't right because you are supposed to bend our wrist so that the nozzle is always facing at a 90 degree angle to the wall.

[maximus1992a]

why doesnt he use an extension and just spray vertical lines? his technique is messy if this would be paint.

[PainterForHireVids]

This guy is really fast

[dhart1977]

Why call it an "airless sprayer" if it uses air to spray the paint? O_o Is it refering to the lack of a compressor?

[CDCEquipmentHire]

An airless sprayer uses an electrically run hydraulic pump to move paint from a bucket or container, through a tube, into a high-pressure hose, to a spray gun, and, finally, to the surface. Once you get the knack of it, an airless sprayer is easy to use, but if you rent one, make sure you get a set of written instructions.

[dhart1977]

@CDCEquipmentHire Oh, gotcha. Thanks.

[ilovetotones1]

@CDCEquipmentHire yo, that dude did that in 2.2...nice kit, first time i see one....or even heard of one.

[RadKuntSmith]

@CDCEquipmentHire, Well actually... no. The Pump itself has nothing to do with the " airless" It's called and "airless " Because there is no Air at the Tip end of the gun, conventional spray guns your air to atomize the paint, and "airless" forces paint through the tip of the gun causing the paint to atomize and form the fan. The pump may be and airless sparyer, running on A/C power. But its called an airless because of the gun

[irish89055]

@dhart1977 don't swing your hands dummy...

[glenspainting123]

this is only a testing room to use and test such products as this... spraying etc.. no masking required!!

[windymillar36]

If it only took him 2:19 to do the coverage that you see....you wouldnt have to worry what it looks like, because i`m sure you would have time to put a second coat on ....

doddle.

[rym360]

never seen that approach before but you knocked all the steel and floor in.I suggest you get a paint sheild.But full marks on the cleanliness of your machine.

[cooptae21]

haste make waste, slow down and do it right.

[partyongarth420]

bottum to top or side to side.. it dosnt matter.. some people say it matters. it definetely does not matter. but it should be done the same direction all the way through.. and besides that all timing with the sprayer...your gonna have to check out th e wall a bunch of times to see if its even coat.. but the sprayer is still gonna save u a fuck load of time with big surfaces

[redhot916spd]

looks pretty thin in spots but of course this could just be a primer coat

[glenspainting123]

@redhot916spd .. your a smart man, u must be a painter!

[zorq2]

I'm not a painter, but it looked like a pretty good job. He kept the nozzle perpendicular to the wall. He went from top to bottom covering half of the previous stroke.

Zamora543 below me says that this guy did a good job but he has to spray the top of the wall so he gives you an 8 (presumably out of 10)

Zamora is right in that the very top of the wall only got one pass with the sprayer while most of the rest of the wall got about 3 passes.

[Miguel001]

no... he said "very good but you have to spray from the bottom towards the top I give you an 8"

[Billymarkz]

was good job results all that matters man no heavys n chunkies then its all good ..id necver spray walls inside a house though fuckers are roufgh as shit n just ugly more comercial big citys do it i live in small town n our reps everything,if u spray walls should backroll taping up windows suks,we spray doors trim roofs its good for that just spray prime n semi on trim then one coat by brush,sprayer has a buetiful factory finish though on pillars n trim just lookes dope!

[zamora543]

hola

[zamora543]

muy bien pero tienes que esprayar de abajo asi arriba te doy un 8.

[TheHamishmiller]

hope u r doing ceiling and floors

[Romanski21]

hope he learns how to go up and down when doing a wall.