Learn how to wax a snowboard like a pro best results

[Irish1727]

can u use an i.d as a scraper

[BriefFeet]

If i had a dollar for every pixel in this video, I would have 2 dollars.

[skyman176]

i can see why you don't work in a ski shop anymore ..

[vichimself69]

@skyman176 LOL

[HansTVchannel]

240p...



[CORRIEJGREEN]

Is the cloth wet or just dry? Cheers

[dccar1]

i've never seen the snow but i'm going soon and this video helped a lot thanks.....

[greene0230]

yo great vid man, best vid out of what ive seen, im going to try this method real soon

[GimpingMan]

Thanks for the video man. Great instruction. hope I dont mess it up haha

[wishiwasriding29]

wow, someone thinks they're a big shot. shaggytwodope666. super sick name, bra. and i've done this method many times, it works the same. cool your jets.

[jasonlajoie]

I did it this way until I got a heat gun. Dry rub the wax on and melt it into the base with the heat gun. No scraping to do and get a full wax job done in under 4 min.

[shaggytwodope666]

is this a fucking joke? You learned from the pros and you don't even loosen your bindings....... You also use a piece of shit iron, I don't see the problem with spending the 30 bucks it costs for a snowboard iron, the biggest advantage is that it maintains a constant temperature so you can get a better wax. I really hope noone took this video seriously.

[skate4life9603]

@shaggytwodope666 i hope you relize no one takes you seriously if you already know how to wax a snoawboard why the fuck are u watching this video if you think ur such a tough peice of shit how bout you make a video since your a snowboarding genuis 

[shaggytwodope666]

@skate4life9603 how about you learn the difference between your and you're before you make yourself look even more foolish asshole. I was hoping to find some extra tips on what to clean my base with if you must know, but what I found was a shitty fucking tutorial.

Why are you watching this video though, your name describes you as some faggy skater. And why the fuck are you all fucking butthurt over my comments for you dickless wonder. Go destroy whats left of your balls on a rail you cunt.

[greene0230]

@shaggytwodope666 hahaha YOUR A PIECE OF SHIT THAT NOBODY LIKES hahaha

[jazzbassist23]

@shaggytwodope666 I'm sorry, i can't seem to find the shaggytwodope666 waxing tutorial. I see you, now sit down and stFu. thanks :)

[shaggytwodope666]

@jazzbassist23 Why would I need to make one when there are plenty of good ones out there. If you want to do what this idiot does then be my guest, you won't be upsetting me. I'm just trying to deter anyone who actually gives a fuck about their equipment from using this braindead method.

Whatever, like I said if you want to destroy your board then be my guest. One less weekend warrior I'll have to avoid on the hills thats all.

[vichimself69]

@jazzbassist23 Check my channel son you will find it

[freddyphredphred]

I'm a bit confused about the temperature. Is it air temperature or SNOW temp?

If it's snow temp, how do i know what temp is the snow? example how cold is snow when the air is 45 deg F?

thx

[GuideLightt]

Does it matter if you iron has steam holes in it?

[TheFunniestDude]

@GuideLightt as long as you dont push the steam button its fine

[driftability]

Awsome video dude, very helpful. getting ready for this season and i think its time i stop wasting money on other ppl waxing my board :D

[69Toejam69]

thx bro :)

[HolyPleg]

what can i use as an alternative scraper? What ca you think of?

[MathewMkay]

@HolyPleg Credit card

[georgecoleman]

No you don't have to take your bindings off for this you just prop it on something upside down and yea it you want to keep your topsheet mint throw some towels between the board and what it's resting on

[SHodge2]

@georgecoleman actually you do want to take off your bindings. Or, at the very least, loosen the bolts. The heats causes the space in between the bolts/board to move and could cause permanent damage to your board. You're best off taking off the bindings.

[MaxEaTsSoap]

@georgecoleman if you dont it can heat your board up and suck the bindindings in and make the boards impact plates break.

[zyuriy]

@georgecoleman Top shops actually recommend taking off bindings. Otherwise you get an uneven wax. Your bindings suck the bottom of your board into them lightly because of the screws.

[becktorkelson]

nice tut tho..

[becktorkelson]

I'm just sayin' but to protect the top

side of your board, put a towel in between

those wood boards and the snowboard..

:-)

I was squinting when you were rubbing

cuz I pictured the board scratching on

those 2 x 4's........lol

[shaggytwodope666]

@becktorkelson do you use your snowboard as a tool to ride the mountain or is it just something to hang on the wall? Who the fuck cares if you even do a minor scuff to your topsheet, if you actually ride that shit will happen anyways.

[FreshLevel1000001]

should i take my bindings out before i wax my snowboard

[soul4tran]

I'm surprised you didn't take your binding off.

No offense, but if you've worked a ski shop and "learned to wax from the pros" then you should know that keeping the bindings on prevents the board surface from being fully flat and not get the best wax results. Just look down a board with bindings and you'll see how it concaves in at the bindings--not ideal for waxing.

[DeadEND2012]

If I'm going to buff my snowboard, Whats the best way to do that?

[dlindberg2nd]

super helpful. thanks!

[summitguy800]

What does the color green mean wax wise?

[soul4tran]

Green wax is the color for All-Temperature wax.

[georgecoleman]

yes wax should be a little bit sticky when you've scraped it all you do after is run the cloth along the board to make it smooth but it will always be slightly sticky.

[konfy]

i got the same -10 degree wax. is the board supposed to feel kinda sticky when im done?

[georgecoleman]

Yeah any block will work, as long as you know what temperature it's for typically yellow is warm to 0 degrees, orange is 0 to -10 and red is -10 and lower but there are also many other colors but generally all give good results

[ScrewPants07]

like just some random brick i forgot that part like any random brick of wax is fine right? dosent has to be specific or anything right?

[ScrewPants07]

IF i has a brick of wax can i melt it down and use that for my board?

[airbare212]

can u use any old wax

[jayfish997]

can i touch it?