do you have to worry about the sound port bit or the jumper cable port on the optical drive when setting it up as a the only device on an ide cable or daisy chain ???
@Ehmoful Does it read DVD types? or only CD media. Also what is the type of your dvd drive?? Everything that has GWA in it is an OS type. So if you took it out of a dell for example it won't work on other computers. Other reason can be that you have a broken lens.
I have that Really Floppy Wire Connected to my First disk drive. But In the middle of it there is another spot on the wire which Looks like it will fit into another disk drive. So can I hook up 2 disk drive on one of thouse Floppy cords?
no, i meant like only one cable set works. i can plug the first set into one or the other and it will work. but as soon as i plug them both in together they dont come up.
note: had to put the question in two separate boxes as it doesn't all fit in one..
hey i have the same tower as you. im adding an extra dvd drive (it already came with one) into the slot below. see on the cables how there is two plugs on both the IDE and MOLEX cable length between the mother board and the drive?. well i connected the second one (the one that has a black cover over it in your vid 1:22) into the second drive for both the IDE and MOLEX leaving the first in the original drive.
Depends. If it is a plain CD/DVD drive paying around $10 to $15 can get you a pretty decent one. If it is a rewritable drive anything between $25 - $40 should be good.
No... you won't need it for this. A CD drive is covered with plastic so the components won't be touched. I have built a computer without using the wrist band.
how much is a dvd drive worth? cuz im gonna need one for the new games, more and more games a scratching the idea of 3-6 cds for 1 dvd disc, so i need to upgrade. and also should i just buy new RAM from 256mb-1.5gig's and a new hardrive from 40gig-250gig or just buy a new computer in general?
do you have to worry about the sound port bit or the jumper cable port on the optical drive when setting it up as a the only device on an ide cable or daisy chain ???
stephen071195 8 months ago
were did the ide and molex come from the video card or motherboard
mickeystickey11 8 months ago
i tried adding a cd drive to my computer
but now when the computer starts i get an error
"disk boot failure, insert system disk and press enter"
any help would be much obliged
thank you
THEUMaster23 2 years ago
hey what if my pc cannot read any blank disc what should i do?
Ehmoful 2 years ago
Could you be a little more specific on the issue. Did you install a new drive or did it all of a sudden stop reading?
enfotoad 2 years ago
@Ehmoful Does it read DVD types? or only CD media. Also what is the type of your dvd drive?? Everything that has GWA in it is an OS type. So if you took it out of a dell for example it won't work on other computers. Other reason can be that you have a broken lens.
Hamstergeval 1 year ago
please
i changed my cd drive with a dvd drive and when i boot up the computer it says "Disk boot failure insert system disk and press enter"
THEUMaster23 2 years ago
I don't think you can just remove the primary drive and turn on the computer. Please contact your computers manufacture for instructions.
enfotoad 2 years ago
I have that Really Floppy Wire Connected to my First disk drive. But In the middle of it there is another spot on the wire which Looks like it will fit into another disk drive. So can I hook up 2 disk drive on one of thouse Floppy cords?
suppdude1 2 years ago
Comment removed
awepon 2 years ago
Now neither of them come up when i boost up.
if i unplug the second drive then the first one comes up again. what do i do to make them both come up??
awepon 2 years ago
1. The second drive may not be compatible.
2. Try downloading/installing the drivers and firmware for the second drive. Also check device manager to see what it says.
enfotoad 2 years ago
no, i meant like only one cable set works. i can plug the first set into one or the other and it will work. but as soon as i plug them both in together they dont come up.
dw ive emailed my uncle, hes an IT guy .
thanks for ur help
awepon 2 years ago
Let me know of how it goes.
enfotoad 2 years ago
note: had to put the question in two separate boxes as it doesn't all fit in one..
hey i have the same tower as you. im adding an extra dvd drive (it already came with one) into the slot below. see on the cables how there is two plugs on both the IDE and MOLEX cable length between the mother board and the drive?. well i connected the second one (the one that has a black cover over it in your vid 1:22) into the second drive for both the IDE and MOLEX leaving the first in the original drive.
awepon 2 years ago
Very short clean and simple. To the point! Nice one!
JetMcCloud 3 years ago
thx for vid helped me a bunch
MeesterWong18 3 years ago
hey thats the comp i've got 5/5
frostycold111 3 years ago
i have that pc to lol this will help alot
joeldude76 3 years ago
:)
It's a pretty old computer. I use it as a "home network storage."
enfotoad 3 years ago
yea mines newer then that one i can tell bye the metal the new ones are glossy i upgraded to 2gb of ram its awesome pc
joeldude76 3 years ago
about how much should i pay for a new drive for my computer?
War56 3 years ago
Depends. If it is a plain CD/DVD drive paying around $10 to $15 can get you a pretty decent one. If it is a rewritable drive anything between $25 - $40 should be good.
enfotoad 3 years ago
oh and do i need a anti static wrist band to install it? =\
frostycold111 3 years ago
No... you won't need it for this. A CD drive is covered with plastic so the components won't be touched. I have built a computer without using the wrist band.
enfotoad 3 years ago
how much is a dvd drive worth? cuz im gonna need one for the new games, more and more games a scratching the idea of 3-6 cds for 1 dvd disc, so i need to upgrade. and also should i just buy new RAM from 256mb-1.5gig's and a new hardrive from 40gig-250gig or just buy a new computer in general?
flare1236 3 years ago
thanks. i have to do this and didnt know how
theMrGrowl 3 years ago
hey i have that same exact pc...how did u get that front piece off?
Bossboy1116 3 years ago
There are two little tabs that I push out at 0:14
enfotoad 3 years ago
very easy. not that hard at all. at first when i opened up my pc i was freackin out from all the gizmos. now its a piece of cake. nice vid
pistonfan92 3 years ago