nooo! D: why invest so much money on optics when you have a such beautiful ribbed barrel? i'd kill to have a sight picture like from my hunting guns on my tactical shotgun. cool looking gun in all though.
@yetidudekiteboy I had to have my gun drilled/tapped at a gunshop so that it would receive the shell holder. At that point, it will just screw on (althought it is wise to use a bit of Loctite on the screws to ensure that they don't back out under recoil). I believe that newer models of the Supernova come drilled/tapped from the factory. Happy shooting!!!
Did you have to modify the mag tube in order to install the mag extension? I know on a Remington 870 you have to remove two dimples in the mag tube to install a extension & doing so would void the warranty. Just curious if I would have to do the same on a Benelli Nova/Supernova. I'm thinking of getting a nova with 24" barrel & want to add a 5 shot nordic mag tube extension.
How much was that tube extention and where did you get it and is there a limit tube you can get for it when you are hunting game that calls for a limit? I have the same gun except I have a 28" barrel. It is badass, I am in love with the thing.
I know this might be a stupid question, but why most shooters insert the shotgun shells in the shotgun holsters with the primer side pointing downwards? Why not the other way so it doesn't slip out? I ask because I really don't know.
@TurretHunter For reloading purposes, it is easy to flip the gun over, pull the spare shells from the holder, and insert them into the loading port of the shotgun. This is made easier if the shells are upside-down in the shellholder...good question. Also, the shellholder grips the shells in such a way that they could never "slip out"...I thought the same thing the first time I saw it, but I can assure you, they are very secure...even under heavy recoil.
@gritloyal I see. One of the reasons I asked is because I have seen a few videos of other firearm users that have complained of slippery solid holsters. But those holsters are mainly clamp holsters, which tend to open up after firing and the shell slips out (looked low quality). Your explanation is very accurate. By fear of dropping the shells, I put the shells on my elastic holsters brass side up and were difficult to reload. Turned them around and all was good. Thanks for the info.
Sweet Setup ! ! ! I had the same idea in mind (as far as adding a mag tube extension) and was wondering what size extension to purchase. A 5 shot extension seems ideal. Don't know if I could justify adding an eotech sight, but to each his own. Great Job Bro.
Mind giving me some info on that sight? I've not seen any like that at the gunshops around these parts. Did you order it online? How much was it? Connected via weaver rail? I would appreciate the help, thanks!
@MrK4G3 It's an EOTech 512 Holographic Red Dot. I bought it online for around $400. It sits on a Mesa Tactical picatinny rail/shell holder. Good luck.
@gritloyal Thanks for getting back to me, what I meant was if it "could" be connected via weaver. I know that you can put on weaver based accessories on a Picatinny but not the other way around. But never mind, $400 is a little too much for a shotgun sight. It still looks pretty damn sexy tho. I guess if I ever wanted to burn $400, I'd spend it on this. :)
tex grebner blocked me because i told him he is a fat punk that knows nothing of what he whines about and he blocked me. i have never heard such stupid punk crap as hjs.
hey i just ordered a super nova 28 inch smoothbore for trap and hunting, i was wondering it comes with rails on the top? if not how would u install them, cause im kinda interested in red dot sight or holographic, some helpful advice will be nice! thanks
@CryptWarrior69 The newer Supernova's should come from the factory drilled & tapped. Mine was not, and I had to have a gunsmith do that for around $40. Then, all you have to do is find a rail you like with or without a shell-holder on it...Mesa tactical makes a good one...and a red dot. Good luck
@CryptWarrior69 Look into a Speed Bead set up for your supernova... Google Image- Burris+ Benelli +Sight - for a look. Great for keeping bead on target regardless of sighting eye position or head alignment. And it mounts most wickedly.
@tbsdrummer87 Midway USA should have a bunch of decent red dots under $100...you could browse there, then google shop to find the best deal. Good luck.
Awesome gun. I just got a Supernova tactical. I plan on keeping the factory 4+1 setup, to keep weight down, the only other thing I'd like to get, is a flashlight to mount on the barrel in front of the magazine tube. Great gun.
I had no issues. After eye-balling it, I had it zeroed in about 5 shots. EOTech makes a great product...5 months later + dozens of 12-gauge rounds = still zeroed. Good luck.
I had the gun drilled/tapped so that it would accept the Mesa Tactical rail. That is what the optic sits on. I believe your M2 comes pre-drilled from the factory...so you would definitely be able to do that.
Hey, i have a benelli super nova tactical. I was wondering if the 6 shot mesa shell holder with shells gets in the way of your hand when cycling the action?
If you're not careful, it'll get you...I have gashed myself before, while hog hunting. As long as your hand is not on the very near end of the forestock you'll be good to go. I've had no problems since I choked down on my grip.
I would not recommend the 8-shot shell holder for this reason.
The best slugs I shot through my Remington are federal 1 1/4 oz 3" magnums. I get them out to 220 yards pretty much aiming straight at the target. No arching or anything. The brand of buckshot I suggest is Hornady tap FPD buckshot. the shells have 8 - 00 buckshot that travel at 1,600 fps. They are the fastest buckshot I have found so far
perfect set up
griegojesse 1 week ago
That is an awesome set up. Good for you! I aspire to have similar all purpose force multiplayer! Just nice
1136tscc 2 weeks ago
@1136tscc thanks for the kind words...best wishes.
gritloyal 2 weeks ago
What choke tube do you use when shooting rifled slugs?
joeyrobledo 3 weeks ago
@joeyrobledo I use an improved cylinder for both slugs and buckshot.
gritloyal 2 weeks ago
Just picked one up today! Great video! I'll bee looking around for some accessories similar to your's!
bttruman 1 month ago
@bttruman Hope you enjoy it...good luck.
gritloyal 2 weeks ago
Fuck you gun control liberals!
commiesarelame 2 months ago
Comment removed
bttruman 1 month ago
@commiesarelame Correct.
gritloyal 2 weeks ago
Any issues with the TLR-1 yet?
Privat3Kag3 2 months ago
@Privat3Kag3 I have one on the gun I'm wearing now, I don't have any issues with it and I love it.
FiveTwoSevenTHR 2 months ago
@Privat3Kag3 the TLR-1 has been a champ! No issues, and a lot of light for your dollar.
gritloyal 2 weeks ago
Your set-up looks to me if you wanted a home defense weapon rather than hunting.
waimanjr 4 months ago
the holographic site... just... why?
jasLBJ23 5 months ago
BREDA IS BETTER THAN BENELLI
MrVnz75 5 months ago
@MrVnz75 LMAO
jasLBJ23 5 months ago
@jasLBJ23 SBLN
MrVnz75 5 months ago
@MrVnz75 SMBZ
jasLBJ23 5 months ago
@jasLBJ23 s.o.d.
MrVnz75 5 months ago
@MrVnz75 bWs
jasLBJ23 5 months ago
@jasLBJ23 CHE CAZZO STAI DICENDO COGLIONE ?! SUICIDAL TENDENCIES
MrVnz75 5 months ago
@MrVnz75 i could ask you the same question. what do yours mean?
jasLBJ23 5 months ago
@jasLBJ23 i say breda is better than benelli...
MrVnz75 5 months ago
How much was the whole rail system and halographic sight?
StraightOutOfBordom 5 months ago
nooo! D: why invest so much money on optics when you have a such beautiful ribbed barrel? i'd kill to have a sight picture like from my hunting guns on my tactical shotgun. cool looking gun in all though.
htmlrulezd00d11 7 months ago
thats just a little overboard for a great italian gun! shoulda just picked up a tactical version and made it tacticool
italianrelic 8 months ago
Hi just wondering how you attached the "mesa tact pic./shell holder?
cheers James
yetidudekiteboy 11 months ago
@yetidudekiteboy I had to have my gun drilled/tapped at a gunshop so that it would receive the shell holder. At that point, it will just screw on (althought it is wise to use a bit of Loctite on the screws to ensure that they don't back out under recoil). I believe that newer models of the Supernova come drilled/tapped from the factory. Happy shooting!!!
gritloyal 10 months ago
@gritloyal Only Tactical and Rifled models come drilled and tapped.
benner2000 4 months ago
@martinezdot129 good, robust spring assembly...no feeding problems so far.
gritloyal 11 months ago
can't wait to mod mine... although unlikely get that eoTech holo on mine.
smlemk42 1 year ago
That's ridiculous! BUT SEXY!
jerryboy219 1 year ago
Did you have to modify the mag tube in order to install the mag extension? I know on a Remington 870 you have to remove two dimples in the mag tube to install a extension & doing so would void the warranty. Just curious if I would have to do the same on a Benelli Nova/Supernova. I'm thinking of getting a nova with 24" barrel & want to add a 5 shot nordic mag tube extension.
amaya1000rr 1 year ago
Where did you get the +5 extension? Will it fit the benelli M1?
ajohnson 1 year ago
@ajohnson I got it from Briley...they have several different models. You'll have to check on the M1
gritloyal 1 year ago
@ajohnson Looking for the right mount for the TLR-1 light to the briley extension. Any help would be appreciated. Thanks!
CRDJs 1 year ago
@CRDJs The tube seen here came from Briley with a pic rail already on it...I'd call Briley and ask if there are any after-market mounting options.
gritloyal 1 year ago
Looking for the right mount for the TLR-1 light to the briley extension. Any help would be appreciated. Thanks!
CRDJs 1 year ago
That is frikken awesome. Now I need an eotec for mine
tacticalshotgunner12 1 year ago
Comment removed
ajohnson 1 year ago
How much was that tube extention and where did you get it and is there a limit tube you can get for it when you are hunting game that calls for a limit? I have the same gun except I have a 28" barrel. It is badass, I am in love with the thing.
DEACONAP4LOVE 1 year ago
@DEACONAP4LOVE $145 from Briley. Capacity maximums vary from state to state, so check w/ your state's wildlife dept to find yours. Good luck.
gritloyal 1 year ago
I know this might be a stupid question, but why most shooters insert the shotgun shells in the shotgun holsters with the primer side pointing downwards? Why not the other way so it doesn't slip out? I ask because I really don't know.
TurretHunter 1 year ago
@TurretHunter For reloading purposes, it is easy to flip the gun over, pull the spare shells from the holder, and insert them into the loading port of the shotgun. This is made easier if the shells are upside-down in the shellholder...good question. Also, the shellholder grips the shells in such a way that they could never "slip out"...I thought the same thing the first time I saw it, but I can assure you, they are very secure...even under heavy recoil.
gritloyal 1 year ago
@gritloyal I see. One of the reasons I asked is because I have seen a few videos of other firearm users that have complained of slippery solid holsters. But those holsters are mainly clamp holsters, which tend to open up after firing and the shell slips out (looked low quality). Your explanation is very accurate. By fear of dropping the shells, I put the shells on my elastic holsters brass side up and were difficult to reload. Turned them around and all was good. Thanks for the info.
TurretHunter 1 year ago
blowing up pigs huh.......awesome
DEACONAP4LOVE 1 year ago
is the mesa tactical rail on your gun the same on as the m2, or m4 and m1014??
i dont know wich one fits my nova great video
bigbammy1 1 year ago
Sweet Setup ! ! ! I had the same idea in mind (as far as adding a mag tube extension) and was wondering what size extension to purchase. A 5 shot extension seems ideal. Don't know if I could justify adding an eotech sight, but to each his own. Great Job Bro.
amaya1000rr 1 year ago
Mind giving me some info on that sight? I've not seen any like that at the gunshops around these parts. Did you order it online? How much was it? Connected via weaver rail? I would appreciate the help, thanks!
MrK4G3 1 year ago
@MrK4G3 It's an EOTech 512 Holographic Red Dot. I bought it online for around $400. It sits on a Mesa Tactical picatinny rail/shell holder. Good luck.
gritloyal 1 year ago
@gritloyal Thanks for getting back to me, what I meant was if it "could" be connected via weaver. I know that you can put on weaver based accessories on a Picatinny but not the other way around. But never mind, $400 is a little too much for a shotgun sight. It still looks pretty damn sexy tho. I guess if I ever wanted to burn $400, I'd spend it on this. :)
MrK4G3 1 year ago
Even though this has the ComforTech, the additional ounces of the extra shells up front will dampen the recoil even more....good choice...smart too.
fuseal1 1 year ago
in canada that's SUPER elligal
CHOSENMARINE 1 year ago
@CHOSENMARINE 'sorry to hear that friend.
gritloyal 1 year ago
Looks like an ass-kicker! Benelli's ROCK!
HollowForm222 1 year ago
May god help the man that breaks into your house
RunninCummins 1 year ago
tex grebner blocked me because i told him he is a fat punk that knows nothing of what he whines about and he blocked me. i have never heard such stupid punk crap as hjs.
2CLAYBOB 1 year ago
@2CLAYBOB its ok, he has shit for brains.
om3gadagg3r 1 year ago
hey i just ordered a super nova 28 inch smoothbore for trap and hunting, i was wondering it comes with rails on the top? if not how would u install them, cause im kinda interested in red dot sight or holographic, some helpful advice will be nice! thanks
CryptWarrior69 1 year ago
@CryptWarrior69 The newer Supernova's should come from the factory drilled & tapped. Mine was not, and I had to have a gunsmith do that for around $40. Then, all you have to do is find a rail you like with or without a shell-holder on it...Mesa tactical makes a good one...and a red dot. Good luck
gritloyal 1 year ago
@CryptWarrior69 Look into a Speed Bead set up for your supernova... Google Image- Burris+ Benelli +Sight - for a look. Great for keeping bead on target regardless of sighting eye position or head alignment. And it mounts most wickedly.
Xixxen 1 year ago
You should be shooting USPSA shotgun matches with that rig.
EESASTORM 1 year ago
@EESASTORM Good idea...thanks
gritloyal 1 year ago
@gritloyal
I am headed down to the United States next Tuesday for the Pan Am shotgun championships.
three ws panamericanshotgun then a dot org
There are plenty of slots left if you are any where near Kentucky.
EESASTORM 1 year ago
@EESASTORM That's a kind offer. If I was anywhere near KY, I would take you up on that. Unfortunately, I live out west. Good luck at Pan Ams.
gritloyal 1 year ago
@Onimusha584
9 + 1
gritloyal 1 year ago
How much did you pay for your Eotech? Im thinking about one for my tactical 870.
kennedylca13 1 year ago
@kennedylca13 I paid around $350 for it on Ebay (Poorfish's store I believe)...you should be able to pick it up easily for less than $400.
'should work well on the 870 tactical...good luck.
gritloyal 1 year ago
@gritloyal Thanks man for the help
kennedylca13 1 year ago
Zombie killer?
iranianboy123 1 year ago
@iranianboy123 exactly.
gritloyal 1 year ago
do you know of any good thermal sightd for the nova?
85psych323 1 year ago
@85psych323 thermal sights are very high, but you could go look around at Optics Planet...the have as good a selection as anyone.
gritloyal 1 year ago
Hey can you recommend me a not too expensive sight for my supernova? Red dot preferably because holos are expensive
tbsdrummer87 1 year ago
@tbsdrummer87 Midway USA should have a bunch of decent red dots under $100...you could browse there, then google shop to find the best deal. Good luck.
gritloyal 1 year ago
wow you are my hero, now i know what it would look like if i decided to make my supernova tactical..thanks
brownspartan390 1 year ago
9 rounds? dang dude thats crazy but beast
wingslayer53 1 year ago
Awesome gun. I just got a Supernova tactical. I plan on keeping the factory 4+1 setup, to keep weight down, the only other thing I'd like to get, is a flashlight to mount on the barrel in front of the magazine tube. Great gun.
Blown4banger 1 year ago
personally I find optics on a shotgun slows my rate of fire down way to much to be worth the increased accuracy
jubbles2343 1 year ago
GritLoyal, What is the difference between Nova and Super Nova.
ikonik69 1 year ago
wayyyyyyyy too long for a tactical build
NVRLONF 2 years ago 2
wayyyyyyy too heavy, as well.
However, its primary purpose is blowing up herds of swine...which it does with raw efficiency.
gritloyal 2 years ago
the one I just ordered is a EOTECH 552 Clone will see how it works? it was only 119.00
tacticoolness 2 years ago
I am thinking of getting an EOTECH for my Mossberg but I heard that there a pain to zero in?
tacticoolness 2 years ago
I had no issues. After eye-balling it, I had it zeroed in about 5 shots. EOTech makes a great product...5 months later + dozens of 12-gauge rounds = still zeroed. Good luck.
gritloyal 2 years ago
how did u attach the holosight on your supernova?? Can I do the same with my left-handed m2?
italianguns 2 years ago
I had the gun drilled/tapped so that it would accept the Mesa Tactical rail. That is what the optic sits on. I believe your M2 comes pre-drilled from the factory...so you would definitely be able to do that.
gritloyal 2 years ago
ok, thank you!
Greetings from Italy!
italianguns 2 years ago
blow up some pigs HahahahahAHAHAHAHA
DBHEcho 2 years ago
whoa.. are those brenneke black magics! if they are you are okay in my book!
ifuckkittens 2 years ago
i think that eotec is the shit on that gun haha.
noaffiliationsfr 2 years ago
Hey, i have a benelli super nova tactical. I was wondering if the 6 shot mesa shell holder with shells gets in the way of your hand when cycling the action?
ledzep152 2 years ago
If you're not careful, it'll get you...I have gashed myself before, while hog hunting. As long as your hand is not on the very near end of the forestock you'll be good to go. I've had no problems since I choked down on my grip.
I would not recommend the 8-shot shell holder for this reason.
gritloyal 2 years ago
Thanks, I grip at the rear of the forestock so it looks like i'll stick with a 4 shot.
ledzep152 2 years ago
where did u order your shot shell carrier from? also what brand? does it bolt right up or do you have to mod it?
TacticalJunkie 2 years ago
im 12 years old and woke up christmas morning and unwrapped my benelli super nova =) i love it
XskillyXdillyXdonutX 2 years ago
I love the EOTech optic, but for those on a buget you can't go wrong w/ a True-Glow
2x red dot. $80 never held a zero so well. I too am a Benelli man. Best bang for the buck :)
Springr1911 2 years ago
i like that sight u got on it.i want to get one for my h&r 12 gauge
mrmantomdirtydollers 2 years ago
what choke do you use when you shoot slugs
gfpd2722 2 years ago
I have an improved cylinder in it right now for slugs.
My favorite slugs are the Brenneke Black Magic Slugs...600gr @ 1500fps. Remington 3" Sluggers are great as well.
gritloyal 2 years ago
mine has a pistol grip i like it a little more but it also has a stock
XskillyXdillyXdonutX 2 years ago
The best slugs I shot through my Remington are federal 1 1/4 oz 3" magnums. I get them out to 220 yards pretty much aiming straight at the target. No arching or anything. The brand of buckshot I suggest is Hornady tap FPD buckshot. the shells have 8 - 00 buckshot that travel at 1,600 fps. They are the fastest buckshot I have found so far
GOD719 2 years ago
I'm thinking about picking up one for myself. How long is the barrel on yours? and do you know the length of pull of hand?
808heaukulani 2 years ago
This is a 26" bbl with a 14 3/8" pull...although I believe that the pull can be adjusted.
gritloyal 2 years ago
thank you sir
808heaukulani 2 years ago
good looking gun
lmroy1979 2 years ago