How to Customize a Skateboard : How to Mount Skateboard Bearings to Wheels

[SasukeMe13]

you have lots of boards can i have 1 pls.......

[spydermonkey44]

@SasukeMe13 hahahaha its a skate shop

[TheInFask]

Tip; if you happen to have 2 full set of washers for your trucks, put 4 into each axle, meaning 2 on both side of the wheel. This way you can tighten your wheel correctly and keep your axle thread inside your bolt so you don't mess your threads up.

[makebank93]

damn i finally landed this. logged it on hotsteeze . com.

[adymenz]

ventuas!!

[Kingro619]

Thanks

[MrBreakYoFace]

do u need key rings? or can u skate w/o them?

[Nipeye]

I don't find it very difficult putting bearings into a wheel, I find it a lot more difficult ,to take them from the wheel, when I want to change my bearings.

[theoneandonlyjust]

@Nipeye yeah thats the trouble i have

[groftsnur1]

Using spacers and tightening your bolts up properly will make your bearings last way longer...

[RaihannTV]

Your jacket, you got it from a homeless guy with a golden voice ?

[jekris1000]

i like skateboarding but i dont have a board.....can anyone give some

[r4ng3r233]

the board looks quite small at the beginning

[Maxmc7]

why dont you just say how to lock it in when your talking about "ill talk about how to make sure to lock it in" just say it for christs sake

[RileySkinner1]

venture trucks are gay

[MrLeopardgekko]

am I the only one who doesn't really like his deck.

[fennlikesturtles101]

nice venture trucks!

[Snickerbockers]

lmfao at like 2:20 the wheel didnt spin..

[steelydan39]

@Snickerbockers yes it did???

[Snickerbockers]

@steelydan39 if it did my pc didnt show me with high resolution LED screen nd in 360Hp

[steelydan39]

@Snickerbockers well just look carefully, i saw it without hd i think

[lordtssd]

@Snickerbockers lol they do

[tinyboofy]

haha he didnt finish talkin

[bigshow456789]

my wheel is lowering what should i do



[16Mirr]

@bigshow456789 it's natural. get new wheels.

[filipinoskater24]

this was uploaded on my birthday

[JumpingShroom]

Dude, they cut him off at the end. He said "and" and then just ended the video haha.

[DrunkHoboBoy117]

@brushinmateef08 no loud wheels ussaly sound determination. youre prob wondering why? Well louder wheels sound pro and some people like the sound when people hear your wheels they usally think wow what good wheels. And usally the sound draws attention making people watch him skate

[cbr16327488]

When you place your bearings in the wheel which side are you supposed to put in the wheel?

[DrunkHoboBoy117]

@cbr16327488 it really doesn't matter usuall u can just put one bearing in the wheel and once the one bearing is in (doesn't matter which side) put the side of the wheel with the bearing on , put it now on the truck with the bearing side faced towards the whole truck and not the outside of the board. then what i like to do is put another bearing in the other side atfer i do that and put the nut/bolt on the axle and screw it on then ur good to go

[16Mirr]

@cbr16327488 i'd recommend the metal side if you have metal bearings. it protects them better.

[sparky10099]

its not diffucult lol

[Charntok]

if you distance the bolt and the bearing too far apart, it will dent the bearing

[suckswithpivot]

@Charntok ya i did that and every bearing blew out

[MESOFRESH4]

Thanks for all the good tips, the really help out alot! I love to make my wheels tight, but not too tight that the wheel doesnt spin freely. I dont want the wheels on my car loose, and i dont want the wheels on my skateboard loose. I love my board finely tuned, and i love my board solid and quiet, not with loose wheels that have alot of play and sound like a tambarine. Another good tip is when you put the mounting hardware on, to only tighten the nuts and not the bolts so you keep the grip good

[thejjjisthejjj]

@ironmaidenmanic nope i didnt notice it at all

[thejjjisthejjj]

@ironmaidenmanic what do you mean by slide?

[thejjjisthejjj]

@ironmaidenmanic personaly I have rode with and without spacers and have found no difference

[shahin54fun]

umm if i get a new wheel do i have to change my bearing or can i put my old one in the new wheel pls tell me i dont know wht to do ??

[Bluesquidharry]

@shahin54fun of course you can any bearing will fit in your wheel

[1outdooradventures2]

WHAT RICTAS ARE THEY?

[sportsguy2555]

LMFAO he said play at the same time he's shaking his hand up and down! xD fail

[1outdooradventures2]

@sportsguy2555 ayyyyy

[stikkitomatri]

my problem is that my bearings become dirty in a week.. sems like i ride a dirt...

my friends have always clean bearings... ride faster than me...

i leave a tiny space... but i think this is a point of why i can't take a max performance of bearings... i dunno if someone got this problem and can help me.. ya know what to do.. thanx...

[LovethisgameRules]

@stikkitomatri same problem a few days before i wanted to change my skateboard wheels. so i put the old wheels of, the bearings of the wheels, and after i put the bearings into the new wheels i just noticed 7 of the bearings were fine and they were rollin really good (abec 7) but the last bearing was so dirty, it didn't even roll and i gave the wheel "enough space". so im thinking of getting some bones reds heard about them being good sorry for my bad english hahah german (:

[wacko0716]

i like this guy...not the one in the vid but deepcut71...you seem like a pro

[ginywiny]

i like liking stuff

[deepcut71]

This is partly wrong.

The bearing press bit is right.

But don't press it down as shown in his second method. You should NEVER press on the outer ring while mounting a bearing on a shaft, and NEVER press on the inner ring when mounting on the housing.

In all cases, heat the bearing first. Either in an oil-bath or an oven.

If there is a rubber seal then freeze the shaft first so it contracts.

[b0redavid]

i like to leave just a tiny space between my wheel and axle (so they can spin freely), i think it's good for the bearings too.

[jowis6]

ty very much :)

[cchukwuka]

how do i get my bolt on it wont lock or straight

[VansSk8Girl]

what side of the bearing is supposed to face out?

[Yesitdid]

AW SHIT!!! THEY GAVE ME BEARINGS AND THERE WAS NOTHING IN THE CASE! just circles! this sucks

[Yussaaa]

owned

[PivotPro51]

lol this is how i do it and its probly wrong i kindda put em in by hand till they are just in and rest a rubber hammer on em and with a normal hammer bang em till they dont go anymore then i put on nut and tighten all the way to get em in the rest lol i bet its wrong tho

[techdecklord32]

do you need truck washers

[torontosk8boarder]

what kind of skate tool is that

[fuckyou51000]

reflex

[Strawberryger]

I wanna put my old bearings in my new wheels. The problem is that I can't get them out of my old wheel... (I don't have a tool) I can't squeeze them out by using my truck. Any other methods? (I also don't wanna waste money on buying a tool just to remove them)

[cerialroxs]

wut is that thing on the other side of the bearing press on the tool the like flower lokking thing

[theskateman57]

@cerialroxs It's a rethreader for the axel or truck

[delidani]

best tutorial on youtube

[infernape855]

where can u buy the tool to help the skateboard?

[nanogameboy]

it jus goes a lil slower

[yoMANkappa]

i dont know very well to skate... but i know that ceramix wheels are much good than plastic or rubber ones. is that right??? pls reply me

[boymyfeetsmell]

dont u have 2 put 2 on each wheel????

[Aquamani]

@boymyfeetsmell dude, he did... he did one side with the bearing press and the other side using the second method.. take a closer look at the wheel in the second method and you'll the the previously fitted bearing.. watch videos a little closer next time before you post a potentially insulting comment

[Rossc8or]

@boymyfeetsmell yup

[edry05]

@boymyfeetsmell he did said at 1:18

[theamazingjoshua95]

@boymyfeetsmell the seocund one he put on was on the same wheel

[boiiflea123]

@boymyfeetsmell yes

[DrunkHoboBoy117]

@boymyfeetsmell no

[seangraze13]

@boymyfeetsmell lol yeah XD

[cjman313212]

@boymyfeetsmell of washers? yes he took one off because there were two you can see it in the scene

[MrUnstopable07]

@boymyfeetsmell uhhh u noticed that the wheel has 2 bearings ryt .. O_o

[sparky123487]

wat bout spacers? i had a hard time takin them out when i used spacers

[alexkmilo86]

spacers watt

[TheCoolNuget]

you need two washers!, i didnt know that

[ditimedia93]

my trucks got fucked up from landin primo

[ALANMENT510]

u should get silver trucks i have the rob dyrdek silver trucks they come with axel caps the wheel bolt is a cap that protects the truck axel so u dont have to worry about messing them up

[keith644]

@ditimedia93 i dislocated my knee landing primo

[Unablecomply]

@ditimedia93 shoulda got ventures, no slide guarantee

[TheRealAmmo]

@ditimedia93 you can get a s kate tool that rethreds them :P

[hgmCreep]

1:15 This !! ? is this really importetn or can i put them out because i lost them xD

[LaneTheMilkMan]

what?!

[hgmCreep]

is it importent to put the "washer" or what its called ( this 2 little things you need to put between the axle and the bearing and the mother xD ) sry for my english any1 know what i mean?

[crash9551]

i didn't know that having the nuts farther away from the wheel makes the board louder when riding.

[Longi452]

Last time I let my bolt cover the threads, I lost my bolt, shield and a washer, then not to mention i fell on my fucking arm. I looked like a total asshole riding down the street. But I guess that's what you get from listening to expertvillage..

[SOULSOFDARK]

hard 2 find all black ventures

[MrDisturbedskater]

are lucky abec 7 good

[zorganzola]

yes there brilliant i have them there sooo good deferentially recommend them

[xxxXzatchXxxx]

yes they r really good

[MrDisturbedskater]

yeah i know know i bought them

[305rocks]

i dun no about u ppl but that door,curent thingy in the back ground is really starting to creep me out ^^ :3

[mickylogic]

lol they def are, u got em?

[NitWitten]

your a dumbass

[RexClay12]

who doesn't know how to put on bearings?

[singmeamelody2]

Bone super swiss six are da best no redz but sure they are really good

[jimbo222000]

lol all u have to do is put the bearing onto the truck and push the wheel onto it, simple

[pkken149]

i did that with my reds and it messed them up

[panthro213]

Did what with your reds? Don't think there are any mind readers here!

[pkken149]

i put the bearing on the truck and put the wheel on and pushed like at 1:03

[yurintexis]

thats what happen to my fkds

[Masterjohn360]

what type of key should i get for my house door ? a colorful one, one with pictures, or just plan.

lol :P

[305rocks]

picture^^

[AzNxBen1234]

ARE FLIP HKD ABEC7 BEARINGS GOOD?

[garthblud]

yer they sick

[AzNxBen1234]

they ride fast and they last long?

[garthblud]

yer best bearings i've had

[lespaulklem]

no

bonez redz

[alexcool67518]

get element wells they have good shape

[monkeyjulu]

dont do that gasoline bullsh*t all it duz is lock ur f*cking bearings dont try it!!!!!!!!!!

[davidabot]

you spent $40 for bearing!?! dude bones reds are only like $7-$13

[luvmyboy711]

Step 1:Hold your breath

Step 2:go to another video

Step 3: add this comment

Step 4:did you make it if you didi you are a good kisser

this is so easy

[laxattack444]

that was a sarcastic whooo

by the way....

[hyedude4life]

my bearing is broken but my wheels is still on and pretty sturdy what should i do?

[rexo105]

Mhm,

They indeed are Cores.

And I think the Rodrigo Your referring to is " Rodrigo Teixiera" (Rod-Tx), Pro Skater Of DGK, (Dirty Ghetto Kids)

[DrummerRC13]

i have ventures

[MagicAshXD]

isn't the wheel just spinning on the trucks and not the bearing itself when the wheel is that loose?

[sherbert246]

just double up on the washers

[SkateSolutions]

omfg lol... Its so freakin easy to put bearing in lol. You can just pres it against a hard surface and then press it the rest of the way with your fingers....

[WARRIOR1125]

should you put it on that tight??

[wolftribex666]

thats gunna blow up your berring from putting the nut on to tight i did it b4

[wwwdzns]

ricta's

[f1nl4y]

stops the bearing from rubbing

the trucks and nut

lol

what wheels are they

[c0wsgowoof]

what does the washer do, i always lose it when i change bearings

[robby040]

i dont think anything

[69gaydogs]

it makes the bearing take less friction

[contrerasc7]

wtf

[elementsk8er720]

its easy to put in

[luketrials]

this dude is an idiot. I like the loose feel and sound?

bearings - WRECKED

[streetplant360]

way to dent in the shields on that new set of bearings, you never crank it all the way down it stops them from moving.

[PineapplesAndPandas]

just shove that mofo in.

works fine with me

[dirrenbb]

hell yeah

[dmoteone]

wheels so loose man... thats dodge as.

stuff the bearing pushers...

ive always used my truck. heaps easier.

[XZiggiX]

Awesome dude

[1nazchan]

Just use lubricant oil or something similar

[stonesku11]

its better to use brute force, lubricant can cause the wheels to feel funky and possibly slip around, w/e floats ure boat

[B0bbyh]

you brak bearigns by tighting them that much..

[chimpanzee243]

5th rating!

[PCXPBOY]

4465th view!

[skateingtube]

4756th view!

[laxattack444]

5000th view!

whooo

[ChaineyElement]

4th rating

[ultimajed]

2nd rating!

[westlawnpark]

ha first r8ting!