Ford Mustang Magnaflow Exhaust Installation

[stepxunit]

Im thinking of getting a Sebring White Hooker (2x 90mm) exhaust for my Golf 3 1.8 CL

Good pick ?

[rtsoccerplayer]

wowwwwwwwwwwwwww that magnaflow sounds NIIICE

[dbflyboy917]

MotorzTV, you might check out the MaxJax by Dannmar equipment. It is a 2 post lift for home garages. Thanks for the video!

[drod241994]

hey i have a 1997 ford mustang and would I be able to have a magnaflow exhaust on it?

[SANDMAN32191]

I love this. As a Mustang fanatic these videos helped me out A LOT.

[MrMustanggt09]

I have the exact cat back on a 09 gt. Do you recommend for me to installl bbk lt and catted shorty bbk x pipe? Or will it be to raspy ?

[333krisb]

I need help trying to figure out how to get rid of the ticking sound in my mustang any tips

[XDKevinAndrewXD]

Hey i have a 05 dodge neon and would like a real "dirty" or low/loud exhaust. What do you suggest?

Thanks

[motorztv]

@XDKevinAndrewXD Flowmaster has some gnarly pipes. Also check out Cherry Bomb :)

[bigfitz1992]

hey motorz, i have a 2008 dodge caliber 2.0L and i wanna get a new exaust that makes it sound kinda sporty. what do you recomend. i work at a tool store so i can get a jack and jackstands easy. would it be cheaper to go to a shop and have them do it or buy the kit (if there is one) and install it myself. thanks.

[motorztv]

@bigfitz1992 We haven't installed an exhaust on that specific vehicle but it shouldn't be too different from any other cat-back exhaust install. It's always cheaper to install yourself! As for the sound note you'd like, I recommend visiting manufacturer's websites as they usually have sound bites that you can listen to. We've had good luck with Magnaflow, Gibson, Borla, and Flowmaster, but there are plenty others you should check out.

[MysticDMBherb]

I stopped watching after 4 minutes when you said you need a lift anyway to get the new pipes in....why would you even start installing if you can't finish it at home?

[motorztv]

@MysticDMBherb It depends on the exhaust and the vehicle, but it's definitely possible if you safely jack up your car.

[coolguy10060]

can you do an exhaust vid for the 08 mustang with side exhausts from cervini 

[motorztv]

@coolguy10060 Thank you for the suggestion. We'll see what we can do!

[coolguy10060]

@motorztv thanks just for that I will subscribe and A little qeustion can a 4.6 liter v8 handle the shelby gt500 supersnake's supercharger

[motorztv]

@coolguy10060 They make blowers for the 4.6L but you'd have to check their website or call them to find out for your specific YMM.

[coolguy10060]

@motorztv yet again thanks alot just curious because a local dealer has a 05 gt with a ealenor style bodykit and produces 810 bhp so i'd like that too

[coolguy10060]

@motorztv  coming back at the exhaust it also comes with the cervini's c500 eleanor style bodykit another suggestion

[phillmango]

am i hearing him right? at the beginning of the vid i can swear hes saying magnafoe. lol



[motorztv]

@phillmango He definitely said "flow" but the exhaust was 'flowing' and may have made it hard to hear :)

[3V1L011]

Should have used car ramps alot easier

[billiardball001]

you dont have to remove the black rubber holders right? i mean you can just loosen them and then slide the exhaust out right? all without touching the rest of the pipe.

[DEADRISING72HR]

I have a 2006 V6 and im going to install dual exhaust do you need a lift or is it possible to do with jack stands?

[khaled6100]

oh that sound

[DeeplyMovinU]

A lift is recommended but installing the over axle pipes can be done without a lift if you have a good level floor, two mid height jack stands under the axle housing, and unloading the ride height by placing a jack on the proper jack location in front of each rear wheel and slowly lifting the vehicle ( one side at a time) to lift the body. Then when you go to remove the pipes twist and turn towards the oppisite side of the car and they will come out fairly easy, But using a lift is much safer.

[blockinater]

that sounds like heaven 4:57

[BLEEDTHOUBLOOD]

personally i would of went with some cherry bomb glass packs, it sounds like heaven.

[evilperson86u]

no saftey glasses at the begining of the video!!!??

[motorztv]

@evilperson86u Oops. You should always wear safety glasses when working on vehicles. We're much better about that these days. Nice catch!

[jonnie256]

whats the part # for that magnflow system

[motorztv]

@jonnie256 Click the link to the Motorz TV website that's in the description. It has the p/n listed on that page. Thanks for watching!

[Mustange500]

Please do a install on a 2010 jeep grand cherokee laredo 5.7 V8! I'm saving up to buy ya'lls exhaust I kind of know how to do it. but I wana see a demo of it.

[TheEddie87]

Sounds great, but that over the axel pipe work is discouraging me. I'd love to do the whole job on a warm Saturday w/o a lift. If I cut the pipes like in the video I'd still have to lift up the car fairly high to install the new ones yes?

[motorztv]

Yes, you would... so it's recommended to have a lift.

[TheEddie87]

@motorztv

Hey thanks - just making 100% before I start the project.

[cutator]

I paid a guy 150 bucks to do it. Best money I spent. He put in the X pipe, pipes back and mufflers.

[00fanfan00]

Road Runner rox!

[LVS12DAVE]

You don't need to take the hangers off to get the mufflers off. Also if you undo your shock bolts and let the axle drop, you can remove and install the midpipes without cutting them.

[NFSTurbo554]

Sounds AWESOME! And alot more muscular

[yooperd]

Great vid, Magnaflows work great. Good thing you guys don't work on cars where I'm from in MI. It'd be mostly torches, WD40 and cursing! lol

[coolguy23448]

lol thats funny (the bird).

[MeanStang08]

ROFLMAO... game over muffler... hilarious!

[MeanStang08]

Although i had the pleasure of changing mine out with a lift, i can see how easy it was to do with jacks & stands. One thing i'm not 100% sold on is the removal of the muffler hangers, i don't think that was necessary. I didn't remove mine when i changed them out - but again, i had a lift, easier to get to i suppose. ? which magnaflows were these ? mine are the Magnaflow 3" aggressive catback 16674 exhaust with 4" tips.. and these look different than mine. again... AWESOME SHOW!!!

[MeanStang08]

Very nice install, I LOVE my magnaflows - awesome job showing the before and after sounds.. 10*

[thissen151]

great series, lots of great info!!

[AlexRmF]

pretty useful video.. now I just need to buy the mustang, the rest looks like piece of cake :D

[loneshark2000]

where do you guys do your shows from? what programs do you use for editing ? what programs did you use on the intro! good show.

[motorztv]

We film in San Diego and use Final Cut Pro for editing. The intro was created by "FinalEcho". Thanks for watching!

[nuclearthreat545]

Best series ever! Why did you change the intro from ''hi im chris duke.......AND THIS IS MOTORS'' I miss that, anyways good vid!

[motorztv]

Thanks for the comment. We changed up the intro a bit to give the viewer a little bit more info as to what I'm about to show them how to install. Which do you prefer?

[ReggyRay289]

I like the new one and so glad to see the "ZOOT" at the end again!

[powerbook1]

I also liked the cheezzyy start lol... but once again a great show :)