How to make a massive Air Cannon out of Sprinkler parts

[Fireisfun97]

Cut the valve stem out of $8 tire or.... Go to auto parts store and get one free

[Pneumaticcannon]

S*%T MAN Down Water Pipe Fittings, Will explode at as little as 1psi and turn into a pipe bomb. PVC shards embedded in the skin do not show up on x-ray.

[jpsieben7]

@Pneumaticcannon you are a dumbass. pvc will not explode at 1psi, and even if it did explode at 1 psi it wouldn't do anything but leak at that low of pressure. a schedule 40 2" pvc pipe chamber is usually safe to operate at around 120psi, though it can withstand up to around 200. the smaller the inner diameter of the pipe, or the thicker the walls (schedule 80), generally the higher psi you can use. for instance 1/2" schedule 40 pvc is rated at around 480 or so psi. cpvc is different tho

[minicrop]

i've never seen some use a drill so badly, as if doing it likethat is easier anyway

[oldman32123]

you dont know anything man. use a modded sprinkler valve instead of that massice sprinkler thing.

[mcgoorr]

How much did the sprinkler system cost

[mcgoorr]

How much did the sprinkler system cost

[louermd]

where can u buy the tire tube

[Tomthetoolman100]

great gun in stead of buying a Tyre tube just use a tubeless car Tyre valve its a lot cheaper

[VASLEE]

what kind of sprinkler system is that and where did you find it

[TimothyTanks]

V\aslee, all you have to do is look for the same type in any hardware store. It will look identical. Jeeze.

[yamahabansheerider]

next time go to napa and buy a tire metal tire valve that crews on and has a nut.

[gamerfreak518]

Great guide, i never thought of using a tiretube to put the air in the pressure chamber for the gun. Thanks for the great info.