How to Solve a Siamese Rubik's Cube

[minecubing]

it works

[minecubing]

for edg flip use r U r' R U R' U' r U' R' i just made it up thrawst if u see this giv me credit yay this vid helps otherwise thx! also first layer white on top use R2 U R2 U' R2.

[minecubing]

you can use R2 U R2 U' R2 for top corner

[sup3razn96]

6:53 lulululululululul



[ColteeYT]

Moving the middle down is an M, not M'.

[hamiltonfrick]

Remember when you could watch a video without commercial?

Remember when music videos were uploaded by user and not VEVO

Remember when all the info was to the right of the video?

Remember you could rate a video 1-5 stars?

Remember the famous yellow subscribe button?

Remember when the users controlled the site and not corporations?

WE MISS THE OLD YOUTUBE!

Post this in every video and lets start a youtube revolution

Thumbs up to keep at the top of the page

[AbGretsch]

@hamiltonfrick you are BEING a commercial...

[drummer07chick]

@hamiltonfrick I never get ads. how bout you stop being a noob

[Thrawst]

@hamiltonfrick Right on. Although I'm not sure what you're protesting by posting on this video, it's self produced and for a few ads I get paid a little for it. Vote with your wallet, rather than reposting this comment leave the site entirely. If you have this stance universally, I also hope you have deleted your Facebook account etc, think globally, act locally.

[chiconium]

HOW ABOUT A SIAMESE MASTERMORPHIX??

XD

[chiconium]

1+1=SIAMESE CUBE

:3

[123456789owen9876543]

i wish i could down load this video

[idiotAREstupid]

RUBIK CENTIPEDE!?!?!?!?!?

[jablo123456789]

@Thrawst I had trouble understanding the second to last part about solving the yellow side? Do you just do that algorithm over and over and hope to get lucky?

[randomcuber1]

YES! I DID IT (no homo)

[LmM9990]

you reeeeeally like rubik's cubes

[ottozing]

after you do th f2l and you get the L shape do the alg (Rw U R' U R 2U Rw'). its like sune but just a little different plus i think its a LOT quicker

[TaoxYu]

You should use roux if you want to be fast as the first block is always done.Also, if you do 2 look cmll there the second look is never needed as two corners cant be swapped in two gen

[ribsandneck]

i made 1 with 2 $20 cubes... i stuck them together with super glue... wrong >:( F**k

[dmr778810]

thumbs up if you found the i llllllllllllllllllllllllllllll­llllllllllllllllllllllllllllll­llllllllllllllllllllllllllllll­lllllllllllllllllllllllllIllll­llllllllllllllllllllllllllllll­llllllllllllllllllllllllllllll­llllllllllllllllllllllllllllll­llllllll

its upper case >:D

[supermonkeyballboy]

@dmr778810 115th I.

[dmr778810]

@supermonkeyballboy did u gand count them cuz its confusing

[supermonkeyballboy]

@dmr778810 Yes, yes I did.

[dmr778810]

@supermonkeyballboy did u hand count them cuz its confusing

[Robolawrence23two]

@dmr778810 did

[dmr778810]

@Robolawrence23two did u use find tell the truth

[Robolawrence23two]

@dmr778810 yah.

[mccrum11]

@dmr778810 i found it right before you put all the l's

[dmr778810]

@mccrum11 not that one the one in the l's

[mccrum11]

@dmr778810 ooo i fond it it's when you say "its upper case"

[dmr778810]

@mccrum11 the one in all the L's!

[mccrum11]

@dmr778810 wait what L's there all I's

[dmr778810]

@mccrum11 i just uppercased the letter they are all lowercased L's

[dmr778810]

where u buy it/how u make it?

[brirocha96]

ok done watching.. if only i had a siamese cube!

[denbroncos4ever]

Thank you so much for this vid! It helped a lot!

[MozartJunior22]

F2L can be solves like in petrus...

[coceng123]

Can I use these steps to solve Siamese Mirror Cube ?

[C53H]

best tutorial on yt, thnx

[zenitian]

I don't think you scrambled it enough...

[SpritesOnPivot]

dude, the siamese has one corner as both so you can turn all aisis.

that is not saimese

[burn2dust]

@SpritesOnPivot there are two variations of it. what he show is one of them; what you talk about is another.

[notabott]

bahh fail tuturiol algurithm are messed up

[Ashanmaril]

You messed up that one algorithm. An M' is bringing the middle layer UP, not down.

[DuctTapePants]

6:56 the cubes are laughing at you

LULULULULUL

[MrXImpossible]

To get the second layer edges:

Sending the edge to the front: R' U' R' U' R' U R U R

Sending the edge to the back: R U R U R U' R' U' R'

I find these easier to remember.

[jrlorenzen]

after 1 day of practicing i got down to a ok time of 1 min 30 seconds

[supermonkeyballboy]

Four months ago when I could really only solve the Rubik's Cube with the _ _i 2_ notation with the beginners' method, I had no idea what you were talking about with the sunes. Four months later, I laugh I didn't get this. Thank god for two-look OLL and PLL.

[MAURICIORUBIK]

I'll make a siamese, I hope I won't get wrong...XD

[AllotaDrums]

The stuff hes saying doesnt match the shit written above

[notcrunch]

ONE CUBE ISN´T HARD ENOGHT, LETS PUT TOGTHER TWO!!

[Karoshi209]

@notcrunch Well that's why i did mine......

[dmr778810]

@notcrunch its very easy go to robh0629

[rathmiron]

@notcrunch i you're not to troubled memorizing something, a regular 3x3 isn't that difficult, but you're right, this seems hard

[damanaboy]

There is no such thing as full OLL for siamese cube, because F's and such are impossible. Because it can only scramble 2-gen and the M slice, you have to use the M slice (or r turns) to orient the edges, because there is no way to misorient an edge or mispermute a corner without 3 faces being functional. Its the reason petrus is so awesome and that there's only one 2-gen COLL alg per case. Rant over.

Respond your thoughts

[coolfrog23]

if you know roux, its basically a normal solve lol

[FEERME1225]

I wonder if move 'F' done by chuck norris would transform the Rubik's cube into a giant penis that shot radioactive salami and BDSM female nazi officers.

[metalsk8r123]

@FEERME1225 and now we observe another gay chuck norris joke

[FireFlies177]

thxi solves it now i can solve a rubix cube and this thx man ur the best

[UhMysteryGuest]

Thank you

[Hypastpist]

they're really getting imaginative with these cubes

[mbrsart]

I'm going to make me a Siamese, but first, time to practice my 2gen algorithms. If I can forever eradicate F and B moves, I will be a happy man.

[AsbjornOlling]

@mbrsart Don't worry, it's not that hard. I figured it out before this video even ended

[mbrsart]

@AsbjornOlling I was having trouble until I realized for it to behave like a Siamese cube I needed to bandage the appropriate pieces. So when I did, I learned just how easy it was.

[anthcybo]

I screwed up and super glued mine so you can't do a M turn on one side :|

[newtubeusername]

no im not R prime, stop asking me! (R U R')

[Dylan014able]

Thanks man u rule!

[supermonkeyballboy]

In a couple of weeks, I'm going to my locl dollar store to get maybe 15 cubes. I'm gonna make a Siamese Cube, a "Double Siamese Cube" (three cubes), and a "Pentuplut Siamese Cube" (5 cubes).

[gamemak0r]

PLEASE!! put the alogorithims in the description@!$@&

[TheRubixGuy]

u said at the end of the vid, "and that is how to solve and make a siamese cube", but u didn't tell how to make a siamese cube in the vid. But good job 5/5

[foxter64]

@TheRubixGuy

The video is in 2 parts, he made the siamese in a different video

[codi2325]

:D?

[evremn]

it looks like lululululululz.

[lordapokalypse]

first f2l case R2,U',R',U,R2

second f2l case U,R,U',M',U,R',U',M

first case if back is filled R,U,R,U,R,U',R',U',R'

[brotherxwolfx666]

@lordapokalypse yours dont work

[SolidJolle]

Isn't it supposed to be fused in a 1x1x3 part instead of a 1x2x3 part?

Tony Fisher fused 2 corners and 1 edge and you fused 3 edges, 2 corners and 1 center.

Which one is the original design?

Looks better when it's only fused in a 1x1x3 part.

In my oppinion at least.

Good tutorial though.

[Slappyiskool]

@SolidJolle Yea thats the original more functiona cube.

[nextorpheus]

when i waz solvin mine it shatterd:'(

[theHansinator]

i can do a 3X3 and a 5X5 but in all my cubing years, i havnt seen anything like this. that thing is wicked cool and flat out impressive!

[xy274]

i think they should stop using paper stickers on the rubix cubes.

[cityzach]

@xy274 they dont...?

[cubeboy716]

in one of the algorithms, you messed up a M' and a U' which should both not be prime

[nrehh03]

you do the algorithms so fast

[lorg4]

no offense bt ur cube(s) r jacked up!

[speedcuber0210]

made one!

[CreemeOfCheese]

will super-glue work as well as the apoxy?

[FORTY848]

i want to make one

[zweimal20zoll]

I don't get it.

[sellylover53]

thanks dude you rock

[UBolt717]

can you list algorithims

[allenbaz]

its homemade this guy shown a video about hoew he made that

[edsucksfredrocks]

No, he took two knock-off brand Rubik's cubes and made a crappy siamese cube.

[adidasfootballer]

nahh its homade

[iNils1]

i made my own f2l. its like fridrich.

[SoftballerXD]

its a diy

[iNils1]

yeah

[justintedkight123]

wooooh

[BottleCapMishap]

WOW is all I can say...

[TechCuber]

SHIT I MADE IT WRONg

[Rabidmonkey73]

you can make it anyway u want. mine only has a 1x1 common block his has a 2x2

[heshskater1992]

@TechCuber

sameeeee =(

[0102troy]

i mean tutorial...soorry

[0102troy]

thanx man..for the turorial...

[tubaman54]

what does U2 and those with the 2 mean

[xBleach4Eva]

They mean that you turn that layer twice ... so 180°

[Niefkolubecky]

it means turn the up face twice

[tubaman54]

i see thanks

[ShadowDrakgo]

@tubaman54 means you do it twice so your turning the top 180 instead of 90 degrees r the left ect ect

[Puzzlaholic]

Means you rotate the layer twice

[cheeseybite123]

on the last part 11:41 the algorithm doesn't work for mine any help I have the exact same cube as you

[greendaylover12345]

For the front F2L slot, do R'U'R'U'R'URUR and use RURURU'R'U'R' for the back.

[xCuboxMagicox]

M goes in the same direction as L

[haha045]

I screwed up at the top cross so i had to start over. again.

What do you do if the L is facing the other way?

[fallingbombs1]

can you buy one?

[fuzzykittensbirrage]

you make it

[nickf570]

dw im finished it

[nickf570]

this is my first time solving a siamese so i dont no wat ur talking about but wat do i do at 10:45 if i have a cross

[Mayorkaman]

at 5:42 you could have done R' U' R' U' R' U R U R

[TheresAFuckingDuck]

at 10:20 you can do a faster and shorter algorithm: M' U M U2 M' U M

[CubesOfTheWorld]

ur notation was screwed in this video

[123321theunknown]

i just made 1

yay

[byorda]

Hey, you can use this Z perm instead of that long 2 gen: do M2 U' M2 U' M' U2 M2 M' U2

[Fahad1422]

nerve raggin

[XDRubixCubeGodXDXpXd]

at 10:00 actually sorry

[XDRubixCubeGodXDXpXd]

that move u do at 9:39 is actually an oll perm that i use woot lol

[kirox777]

7:52 thats what i do on a normal rubiks cube lol

[stomtrooper]

He made tat, look at the response.

[Hulianomarkety]

that thing is messed up...

[Spitsonpuppies]

Your notation for the M slice is incorrect. It moves according to the left layer, so whenever you say M', its actually M.

[95Barqs1]

Looking at that cube is like looking at a pink porcupine with a monkey's head up its butt eating a buffalo's ballsack. Should I describe what it looks like and analyze it? Or should I just be so shocked the thing even exists?

[flyguy1333]

Dude thank you so much. You are the shit! You taught me how to make one of these. And now I k iw how to solve it! Great video. But some of the algoritioms were wrong. But I still figured them out. Thanks thrawst!

[byorda]

poor cube... he wants his retirement

[ZOOYORKFLATS]

where is the best place to buy a tiled 3x3?

[UltraBenBuja1000]

Toys 'R' Us

[slappinuallday]

5:40 is that a PLL for the 3x3? i hope so i don't feel like memorizing one more algo

[fastguy93]

anyone know where i can get one of these?

[c1829]

glue two cubes together

[fastguy93]

i honestly cant see how i could possibly do that. but if u say so

[Degarne]

@fastguy93 You take two 3x3's. Take out an edge and the two adjacent corners on both. Apply glue, stick together so both the open slots are placed together to make the siamese cube.

[TheGbpackr]

you have to make it

[fastguy93]

it looks complicated. thanks i'll try

[robindeun1]

thanks for make this vid!!!!

[mousekamikadze]

thank, cool

[chuffed100]

after u get the top face coloured yellow but not orrented and two corners are right and two are wrong, how do you solve that?

[AwesomeEraserz]

445 Rating. 5 stars.

[flemingman84]

I thought the 3x3x4 was weird...

[Susleine]

Cool, confusing, but cool

[Oxygagi]

öhm xd

[poptheman1]

this helped me solve my 3x4x5.

[KrYp7on1t3]

cuz a 3x4x5 is an extended siamese cube :)

[JonnyWayCool1]

awesome!

[tospace2006]

algorithm at 7:41 is wrong you wrote U' but make an U move

[KrYp7on1t3]

yea i noticed that lol

[MrIrishPotatoe]

@ikillhookers4fun hahahahahahahaha

[wra7h]

Geek.

[rubixluver123]

thx i can solve it now!!

[JakeG775]

it is so HUGE!!!!!!!!!!!!!!!!

[DaKrazedKyubizt]

M is towards u, M' is away from you....

[mikkiz4]

your cubes cind of beat up :)

[TheBlueUmbreon]

In his tutorial, he said both of them are crappy. The ones I used are crappy as well. go see it

[PokefanDP]

I can do it all apart from the final layer, "this is just like how you'd do it on a 3x3."

I've only ever used the beginners method for the final layer, :S Heeelp?!

[thebackflipmaster]

has anybody ever made a 4x4 or 5x5 siamese cube? that would be sick!

[JonnyWayCool1]

tony fisher made a 6x6 siamese cube!

[thebackflipmaster]

i saw that! he also made a gigamate (siamese gigaminxs)

wo!

[JonnyWayCool1]

he should extand the pieces on one of his siamese megaminxs and make a evil twin teraminx or something!!

[KrYp7on1t3]

...and also a 5x5. cant wait for the 2x2, 4x4, and 7x7!!! W00T lol

[realguitarist07]

It looks like a conjoined twin pair of cubes. It looks a bit difficult. Now make one with two 5x5x5 cubes. That would be interesting.

[dum444]

woow thats nerd

[morganlovato]

what the hell kind of contrapton is this?!?!

[itzabigredlight]

and lulululul!

[itzabigredlight]

lol rururur

[coolness382]

thank you so much!

[Frogboy1728]

"M" Means to turn the middle piece clockwise, M' means to turn the middle counterclockwise, U means upper side clockwise and U' counterclockwise

[dicka999]

WHAT THE HELL IS M AND U AND THAT

[Frogboy1728]

Im confused on the last part..the 7 different patterns plz help

Oh god what is this! This is an unwanted abortion from a Rubik's Cube is what it is!