Bob Long Vice / Protege Paintball Gun Maintenance Video

[RKftw68]

Use an air compressor to blow the piston out or remove themacroline from the reg amd screw your tank in SLIGHTLY to blow just enough air to take it out

[undretakerpaintball1]

how do u turn it onto automatic

[TheAmateurpb]

does anyone know what i should set my dwell at for my vice?

[masterobiwonkenobi]

@TheAmateurpb 8:35

[unknownXskidmark]

What kind of lube should i use for my vice

[rippinonap1]

Anyone wanna sell me their vice?

[kred76]

use a chopstick, it's the only advice on PBN i actually used and took to heart with my Protege

[kred76]

@kred76 to remove the lpr assembly that is

[wesbbg3]

how do you replace the hpr spring in the vice?

[bosshog871]

any one know what kind of board is in the protege with out the dip switches?

[redmced]

on getting the lpr out, i didnt have the patience to wait for the glue to dry, so i used hemostats to get the piston out and they worked great. you should be able to find them in most first aid kits.

[TheMan16111]

my bolt is sticking really bad what can i do send me a personal message

[davidthorne999]

@TheMan16111 try increaseing the dwell

[X7PaintballerX7]

Just got my Vice on saturday and played yesterday. I love it, and this video is a great help, thanks Mike

[rubiksfan2000]

what kind of lube do you use for the vice and where can i get it? thanks someone reply plz

[polishboy42]

if u watch the vid again mike uses dow 55 which u can get a any hardwear store.

[anthem8]

lol, thats kinda funny how he was like if you shoot yourself in the hand and it hurts your good.

[ulrahc]

***4 turn and 1/4 on the hpr and 2 turn on the lpr I mean

[ulrahc]

so I've just lubed the entire body and is it normal if i need to turn about 4 turn 1/4 and about 2 turn on the lpr to have 75psi??

[p8ntballjunkey]

Just tap the lpr body against a hard surface, the piston will move enough to grab it with pliers.

[TheWhitePaintballer9]

I got my protege a couple weeks ago and i dont see the dip switches. I open up the grips and lookd for hours and i dont see them. Any help?

[B23ND4N]

You prob have a newer board. Check the Bob Long forums on PBNation.

[XxMVPpbxX]

FUCK PBNation

[anaklusmos]

hmmm, it might not come with the protege

[pogman55]

thanks 4 the help

[eightballer41]

Nice...definitely needed this

[Thomas818300]

what should i get a rapper or a vice

[dpnick1993]

depends on what kind of gun u like, id take a vice though

[mikey70298]

does sleek lube work to with the ram?

[stubbleson]

yes u can

[copperfront]

Can you use DOW 33 lube on the vice? thanks much!

[tristanot007]

They reccomend 55, so Id say use 55.

[caconxXx]

1.5 turns in from flush?... what does that mean?

[throwingdownatthe50]

Flush is when the screw is 100% flat with the regulator run your finger over it and if you dont feel a difference you're golden. From there turn your allen key 1 and a half times which is considered the bench mark for tuning your gun.

[macangel1]

G3 is kind of out of the question. My friends DM6 is really smooth and quiet, it has a nice trigger. I have a marq and a vice. I like the marq a bit more though. For me it would be the marq.

[aznstylez1]

Where can I get Dow55, and what other kind of lube does a Intimatador use?

[paintballer1184]

It uses dow 55 only. Usually you can find dow 55 only if you do some searching.

[paulpker121]

Nice video.

[p41ntball]

and whats dwell .. lol

[p41ntball]

Do u recommend my buying the lpr tester or is there anmother way to see what the psi is??

[deegan463]

buying an lpr tester or an ashcroft hook up gauge is pretty much the only way to do it (atleast that i know of). wouldn't it be awesome if it just came with one? lol

[p41ntball]

& at the end was he seeing how to adjust the velocity without chrono?

[p41ntball]

whats flush?

[malicepb]

please do a maintenence vid for 07 ego

[xEg0xAddictx]

dude why would he make a video on teaching a ego7

they are all teched almost EXACTLY the same.

take backcap off

lube rams o-rings (front/back, not middle)

done

pop bolt pin out pull out bolt lube bolt.

[saucy2727]

why dont u use these high end guns when you play?

not going against the marq just you have a lot of more expensive guns

[Ryanardo2]

beacuse there more expensive doesnt mean there better ive seen people with egos get the shit shot outa them with a protege, or a marq, even a proto rail

[smartpartssalmon]

get an ego lol

[03Paintballer]

Thanks Mike

[bigkalabaw]

Hey Mike, Sent you a PM, would be awesome if you got back to me. It's about the Vice as well!

Thanks

[pbsnakeguy]

cool

[lilyosMOB]

thats a nice vice

[MonkeyKing9119]

does the vice come with the LPR tester? or would i have to buy it separately? i'm planning on getting a vice and i'm new to bob long, but been a great fan.

[19chevelle72]

no, the tester is sold seperate, google and you can find for about $35

[soisoi9]

who is joe or terry

[paintballtechpb]

techs at bob long

[ianisverycoolman]

you meann left side

[drigerV88]

been waitin for this vid for a while =)

[13pbstar13]

lol the last two videos counting this one have all been the guns I own. Lol

[CockerTech]

u should do a Autococker Maintenence Video.

[deegan463]

ohh ya!!!!

i'd do one but i tend to over-do it and take a lot of time.

[Thien98]

and if possible, culd u put them in order from best to worst THANK YOU

[Thien98]

and mike, or neone else, what do u think the best gun is, etek 2, pm8, vice, or infinity legend...

[deegan463]

don't know much about the legend, but a lot of people i talk to like the vice better than the ego8, so i'd say its way better than the etek2 or pm8. even the protege is better than the etek2.

[Thien98]

how come all ur emails say thank you for your email, well be responding here shortly...

[jaimito707]

nice

[crowntownskater]

i like the music in the backround

[paintballtechpb]

naughty by nature - everythings going to be alright

[Mizzle83]

Hey Mike, does the stock vice have the LP poppet? Or do you have to upgrade to it?

[pbmartin14]

this isnt mike, but no i dot think it comes with it, its a 40$ upgrade, wich makes it quieter,more jentle on paint, and reduces kick by alot

[splicitysplat]

Thank you so much for this. This helps out a ton since the vice didnt come with a fricken manual.

[cm4200]

does any body know where i can buy a pillow bolt that looks just like the vice one with the curved back. that will make my protege look alot better

[cleanguns66]

sand paper?

[2crazedforschool]

i needed this

[CubanPaintballer]

what is that engraving?  vines?

[PrimeraG20]

only 1.5 turns for the LPR? damn i seriously need to get myself a LPR tester for my vice.

[CubanPaintballer]

sexy engraving

[p8ntballplaya1995]

mike wear did you get that lpr tester i've been looking for one of those. thanks

[Wecanhelp]

bob long's site

[paintball006]

lol this video has been viewed 215 times already :p

[GeoffBracePaintball]

i don't own a vice or protege, but very nice video, your description was nice and clear like normal and even tho i have never touched one i think i could easily do the maintenance =)

[gamerperson14]

damn

[lasersdend15]

FIRST... wait a minute

[mattiik]

GUYS DONT MAKE MORE ACCOUNTS BY YOURSELVES

mike i have a question : on a scale of 1 to 10, how well known are you as a gun tech within the paintball community

[xXBallaO7Xx]

like yo is this a fukin joke wtf is going on??

[paintball006]

OMG only 710 more people till the super gun show!!! everyone make another account ;p i have already made 2 other ones and subscribed with all 3 ;p

[paintballtechpb]

supergun show at 10,002

thanks for the tip!

[xXBallaO7Xx]

mike who the fuck one the first post, im so pissed right now

[paintball006]

lol damn i was lien ;p

o well people get your friends come on !!!

[OmegaStrikepb]

LMAO! "coughf coughf" owned

[scottyjim3000]

LOL DOMINATED

[GmIaBrScOoN]

hahahahhha.

hamburgler is a feind!

[xXBallaO7Xx]

mike did u just delet my first post???????????? omg im about to flip if u did

[CSSOcelot]

first to rate :P

[xXBallaO7Xx]

mike am i first or whta?????

[808baller808]

last!!

[eddiebelanger]

first....not

[kookamajunga]

Mike it'd be great if you showed how to put a UL frame on a PMR

[xXBallaO7Xx]

ommggggggg i didnt get first did i?????????

[xXBallaO7Xx]

mike you fool u tried to be first omgggg im soo happyyy i never thought i would get first

[rhyn0420]

first

[paintball006]

lol mike u putten up a lot of posts now?

[paintball006]

i mean videos

[paintballtechpb]

when I get to it :-)

[9baseball10]

second

 ahhhhhhhhhhhhhhhh

[pmrcrazzy]

wef

[xXBallaO7Xx]

hahahahahahahhahah yeeeeeeeeeeessssssssssssssssss­sssssssssssssssssssssssssssss

[xXBallaO7Xx]

first

[obbe69]

you fail to

[paintballtechpb]

hamburglar strikes again!!

FIRST POST!!!

MUHAHAHAHHAHAHAHA

[obbe69]

you fail being first isnt always the best its being last

[xXBJPXxXTy13rXx]

THATS SO UNFAIR LOL "xXBallaO7Xx" got pooned

[xXBallaO7Xx]

yo i got first post dont even be like that mike

[SgtJoemama]

if we get first post you send us free crap. but if u get first post we have to send u stuff lol

[xXBallaO7Xx]

we already give him shit we give him the fame he has now and the subscribers, and what does he do he fukin posts the first comment and i get second

[yangado11]

well he cant always be sending stuff to us. All the stuff he sends must cost a fortune. Also after getting the guns for the Super Gun Show, i can imagine Mike's running low cash at the moment.

[panzerfaust746]

mike who is going to be on at 1 in the morning looking at paintball videos besides u?????? i think mike is starting to get cheap and doesnt want to give away free stuff anymore heheeh but we still love him.

[acgolfer719]

he tapes them a while ago then uploads them later... and why would he be cheap if he is adding videos for people in different time zones... shipping is much more lol

[Mizzle83]

If you had any idea on how much money he just spent on the super gun show you would be acting like a jew right now to.

[panzerfaust746]

or hes just saving some money to buy me a sl8r =)