@EmperorZhang66 Not sure =[ Details from newegg listed below: All IntelSocket 775 CPU Core2 Extreme/Quad/Duo Pentium Extreme Edition / D Celeron D All Intel Socket 1366 CPU Core i7 ALL AMD Socket K8 754/939/940 CPU Athlon 64/FX/X2 Opteron Sempron ALL AMD Socket AM2-940 CPU Phenom X 3 X 4 Athlon 64/FX/ X2 Opteron Sempron
I have a Antec 1200! 1GB 4870. Phenom II X4 955BE. A Crosshair III Formula board, 4GB Corsair Dominator DDR3 (@ 1600Mhz), Windows 7 64 Home Prem, 1010Watt FSP Modular PSU, etc, the only let down with my rig is:
the HSF! It cost £19, an it's a step up from stock. It's a Super Quiet 22dBa Triple Copper Heatpipe with what looks to be 90mm fan. Its max speed is 2150rpm via PWM. The heatsink is quite big.
Will the smaller, nickle type DK be better? I need better temp drops. My CPU is 37degrees
@UKFX Get a good name brand cooler like a Zalman or a Xigmatek and you will have cool temps. That CPU runs hot! AMD quads like any quads produce a lot of heat and I always recommend a Cpu cooler
@smileforeverever My buddy has the xigmatek (red fan) cpu cooler on his AMD and it as well can only point up or down =/ The Nzxt Tempest Build in my videos ;]
@meekoman25 Try to find a motherboard which has the option to unlock extra cores. Then maybe you can turn that dual into a quad for free. Also I'd recommend not to get crucial ballisitx tracer unless you want to go through the hassle of replacing them a year later. Watch one of my vids and you'll see my experience with crucial tracers. Besides that everything looks fine =]
@niggataytay300zx Thanks. The motherboard does have a core unlocker and I didn't know that the Crucial memory stick had problems. But they do come with an lifetime warrenty
@meekoman25 Yes but I've read about people going through 4 sticks in one year =/ If you're up to sending stuff back, get the ballistix The lights are so cool, sadly mine maxed at a year lol
Ugh... I cant stand video card fans! They always go out first, and theyre always the loudest! Anyway, I had a crappy compaq my dad had bought about 3 years ago... Has 1GB ram, 200GB HDD, AMD dualcore, and Vista... It used to be fuckin slow! And would just randomly freeze... Well, To cheaply fix the problem, the fan was doing nothing except blowing air on a wall, i reversed the fan to suck air insead of blow.... Well, it fixed the Freezing and slow problem! Intel heatsink on an AMD processor.
@MrPrunecandy Not stupid at all.... It can be setup for anyway you want it to push or pull! You can have it pull through from the front, blow back from the front, pull through from the back, or blow through from the back =]
Temps during idle for stock e8500 @ 3.16 were about 38C-42C in my florida where my room temps were 80F or 27C During gaming temps never rose above 50C Oc'd to 3.8 ghz temps stayed below 55C all the time easily and idle was about 42C A pretty decent cooler for performance and looks
Im not too sure about performance compared to those other heatsinks =/ But any xigmatek will perform very well. From my memory, the OCZ is very good but I havent heard much about the Coolermaster. Youtube search for vids and Im sure you'll find vids with test runs with the coolers you look to purchase =] And yes, the stock xigmatek fan is semi transparent black with nice white leds =D Sry if I couldnt help anymore
Thanks mate, and dont worry, your response was very helpful, I just asked because those benchmarks are not always certain, some websites plce the dark knight above the 212, some others dont.
In short, I just wanted to know if you are happy with the dark knight cooler and how many degrees less are you getting in comparison with your stock cooler (dont know which CPU are u using though)
Gotcha and ya its hard to compare temps when the heatsinks are used with diff cpus and thermal compounds. I was very happy with the dark knight and it may not bring idle down much, but temps barely increase at full load. Id def put it at the top of my list for a 40 dollar cooler
Thank you And yes it is Im pretty sure, only thing is that the mounting system makes the fan blow air up or down. Not side to side like Intel's mounting setup
how tall is it? or how much clearance is needed from the motherboard, to the other side of the case? my case is around the same size at the antec 1200, but it has a fan in the sidepanel.. will it still fit? if not, my damn case won't let me have this :(
hey man ,one more question ,i was wondering what mobo you have because i have a gigabyte EP45-UD3P (rev 1.1) and my NB heatsink is pretty big ,and i was wondering if it would fit on its side like your one with my NB there ??
hey brother got a ? for ya i know darknight is a fantastic cooler wondering what temps your getting im torn between this and the v8 was the install easy i also plan on ocing please include your specs
When I had this in my computer I had the e8500 oc'd to 3.8 ghz It idled around 40C and maxed at 55C after extensive stress. Pretty good cooler and temps for florida where I live
Am i correct in saying that there are 2 different versions of the dark knight: the s1283 and the s1283v? I'm asking because if there are 2, do both versions come with the crossbow-like brackets that can fit a 775 mobo?
i have this cooler and i love it its the best one ive EVER had pluss when the fan dies you can replace it the only issue i have with this fan is the mounting brackets for the fan itself i norm. idel at 19-22c and i havent seen it past 38c and im useing a i7 i got a video of me benching my cpu check it out tell me what you think best if you watch it in HD and in full screen so you can see the time
Thx =] and I usually use Crucial ballistix in my computer, I put in this OCZ reaper just for this video so the led's from the crucial didnt interfere with the Xigmateks lights
Ya it would be awesome and unique =] Only thing that sucks is the fan controllers wont work anymore and to replace the fans would cost like 70 bucks in fans lol
Wow awesome looking cooler. I may have to look into this, my zalman is getting boring... Then again I want to change out sh!t in my PC before I even have it for a year lols.
Looks nice man! Just ordered one of these for my son from Newegg to slap on his lil E5200. Clocked it up to 3.3 on stock voltage and the stock heatsink/fan was letting it run up to 60c under load. I hope this cools it down. I've heard great things about these coolers.
Im sure this will bring those load temps way way down =] I seated mine three times to get the optimal temps I wanted. Might seat again with the given paste from xigmatek and see how it holds up. In this build i used Artic Silver 5
Another blue lit case.......... Really??
PinoYKiiD907 7 months ago
@PinoYKiiD907 Yup...
niggataytay300zx 6 months ago
how bright is the xigmatek dark knight fan led?
I want something dim and cool without getting easily distracted by it since i have a window side panel.
BIGDADDYF50 7 months ago
@BIGDADDYF50 Somewhat bright. I'd rate it like 6/10 for amount of light produced
niggataytay300zx 6 months ago
Nice poster dude
WhiteHawk137 9 months ago
you can't install a second fan because it doesn't have slots for the fan brackets unless you get creative
acogscopepwn 11 months ago
This one is not silent
mezooo2020 1 year ago
Did you install the fan onto the fins with needle nose pliers?
Xxd3cayxX 1 year ago
Dude and what about Xigmatek XLF-F1454 LED BL 140mm this fan is it quiet because I`m gonna use it in my rig Please help enthusiast guy
Gaara7809 1 year ago
is it possible to mount another on the back end of the heatsink fins?
RyuuMasato 1 year ago
@RyuuMasato If you have the space you could rig up a rear fan. I do not believe the cpu cooler kit comes with extra fan mounts though.
niggataytay300zx 1 year ago
Nice chiptunes, used to open up keygens just to hear them. This one got a lot of playtime. :D
Damecos 1 year ago
@Damecos Ya these tunes are really catchy!
niggataytay300zx 1 year ago
does this work with am3 phenom ii x6 1090t?
EmperorZhang66 1 year ago
niggataytay300zx 1 year ago
@niggataytay300zx Thanks. It uses the same socket as an phenom ii x4 so i think it should.
I have seen someone with it on their rig so it should.
Thanks :)
EmperorZhang66 1 year ago
@MJBDC7 Yes you can with almost any 120mm fan you want.
niggataytay300zx 1 year ago
i set my cooler like you on amd system !!! :)
smileforeverever 1 year ago
@smileforeverever How so? Maybe I shouldn't do computer work under the influence so I can figure stuff out lmao
niggataytay300zx 1 year ago
I have a Antec 1200! 1GB 4870. Phenom II X4 955BE. A Crosshair III Formula board, 4GB Corsair Dominator DDR3 (@ 1600Mhz), Windows 7 64 Home Prem, 1010Watt FSP Modular PSU, etc, the only let down with my rig is:
the HSF! It cost £19, an it's a step up from stock. It's a Super Quiet 22dBa Triple Copper Heatpipe with what looks to be 90mm fan. Its max speed is 2150rpm via PWM. The heatsink is quite big.
Will the smaller, nickle type DK be better? I need better temp drops. My CPU is 37degrees
UKFX 1 year ago
@UKFX Get a good name brand cooler like a Zalman or a Xigmatek and you will have cool temps. That CPU runs hot! AMD quads like any quads produce a lot of heat and I always recommend a Cpu cooler
niggataytay300zx 1 year ago
Nice callender :)
Morganhesketh 1 year ago
@Morganhesketh Thanks I just recently took it down though =[ Look at the year hahaha
niggataytay300zx 1 year ago
@Morganhesketh Thanks haha I retired it sadly =[
niggataytay300zx 1 year ago
what is the case by the way?
YajC131988 1 year ago
@YajC131988 Antec 1200 =D
niggataytay300zx 1 year ago
how to install it on amd system like you my lights look down at dark nigth cooler lol
smileforeverever 1 year ago
@smileforeverever My buddy has the xigmatek (red fan) cpu cooler on his AMD and it as well can only point up or down =/ The Nzxt Tempest Build in my videos ;]
niggataytay300zx 1 year ago
Mario Brothers soundtrack ?
bespreDELLXPS 1 year ago
@bespreDELLXPS Its a Keygen song, I can find the name if you like
niggataytay300zx 1 year ago
Do you like the XIGMATEK fan?
meekoman25 1 year ago
@meekoman25 Loved it when I had it. Computer is sold now =[
niggataytay300zx 1 year ago
@niggataytay300zx How come?
meekoman25 1 year ago
@meekoman25 Need money to build my 300zx twin turbo =/
niggataytay300zx 1 year ago
@niggataytay300zx What car did you put it in?
meekoman25 1 year ago
@meekoman25 I have two Nissan 300zx's The twin turbo model I am working on to try and get 400whp stock turbos.
niggataytay300zx 1 year ago
@meekoman25 Cool
Oh, i have a different question. Does this set up look fine to you?
AMD Phenom II x2 3.1GHz
Western Digital Caviar Black 500GB SATA Hard Drive
Crucial Ballistix Tracer 2GB (2 x 1GB Sticks) (PC3 10600)
ASUS M4N75TD ATX AMD Motherboard
XFX GeForce GTS 250 Video Card
XFX P1-650X-CAG9 650W PSU
meekoman25 1 year ago
@meekoman25 Try to find a motherboard which has the option to unlock extra cores. Then maybe you can turn that dual into a quad for free. Also I'd recommend not to get crucial ballisitx tracer unless you want to go through the hassle of replacing them a year later. Watch one of my vids and you'll see my experience with crucial tracers. Besides that everything looks fine =]
niggataytay300zx 1 year ago
@niggataytay300zx Thanks. The motherboard does have a core unlocker and I didn't know that the Crucial memory stick had problems. But they do come with an lifetime warrenty
meekoman25 1 year ago
@meekoman25 Yes but I've read about people going through 4 sticks in one year =/ If you're up to sending stuff back, get the ballistix The lights are so cool, sadly mine maxed at a year lol
niggataytay300zx 1 year ago
can you tuen the led off?
utubeb14 1 year ago
@utubeb14
no.
bespreDELLXPS 1 year ago
hehe, nice music. Are those Ultra heat spreaders on your RAM? I saw them online and might wanna try something like that
Aristowi 1 year ago
Thats one awesome PC!
ekipsss 1 year ago
@ekipsss Ty ty =]
niggataytay300zx 1 year ago
What heatsink fan is that?
itchyfingers89 1 year ago
@itchyfingers89 NM, fucking dumb question. Just ignore it
itchyfingers89 1 year ago
Ugh... I cant stand video card fans! They always go out first, and theyre always the loudest! Anyway, I had a crappy compaq my dad had bought about 3 years ago... Has 1GB ram, 200GB HDD, AMD dualcore, and Vista... It used to be fuckin slow! And would just randomly freeze... Well, To cheaply fix the problem, the fan was doing nothing except blowing air on a wall, i reversed the fan to suck air insead of blow.... Well, it fixed the Freezing and slow problem! Intel heatsink on an AMD processor.
ccraig412 1 year ago
@ccraig412 And everyone knows AMD's need some air... Cause if they dont get it... They WILL overheat... Thats another reason why I like intel... >.>
ccraig412 1 year ago
what Geforce Card is that?
wallonthefloor 1 year ago
Comment removed
wallonthefloor 1 year ago
@wallonthefloor nevermind, its the same card I have but a different brand
wallonthefloor 1 year ago
@wallonthefloor 260 gtx
niggataytay300zx 1 year ago
probably a stupid question..im about to buy this heatsink and i was wondering if the fan blows air into the heatsink or sucks it out?
MrPrunecandy 1 year ago
@MrPrunecandy Not stupid at all.... It can be setup for anyway you want it to push or pull! You can have it pull through from the front, blow back from the front, pull through from the back, or blow through from the back =]
niggataytay300zx 1 year ago
very nice! question!! what case and power supply do you have? they look great!
flyer56 1 year ago
@flyer56 Thanks Case- Antec 1200 Power Supply- Kingwin Mach1 700w Modular
niggataytay300zx 1 year ago
QUESTION! about tempature,whats like the normal tempature on idle or when gaming? would like to know cuz i might buy this one.nice vid
MrValtsu 1 year ago
Temps during idle for stock e8500 @ 3.16 were about 38C-42C in my florida where my room temps were 80F or 27C During gaming temps never rose above 50C Oc'd to 3.8 ghz temps stayed below 55C all the time easily and idle was about 42C A pretty decent cooler for performance and looks
niggataytay300zx 1 year ago
just got one and got to say its lite and it works very well in my lian li pc-p50 armorsuit case. great vid niggataytay300zx. dig the retro tunes :-)
omygod666oms 1 year ago
@omygod666oms It sure is a great cooler for the price! Thanks so much =D And the keygen music I believe goes very well with the computer videos ;]
niggataytay300zx 1 year ago
It is a pretty cool cooler, is it better that the Cooler Master Hyper 2010 plus or the OCZ Vendetta 2? Thanks. Oh... The stock fan has white leds? :)
Aristowi 2 years ago
Im not too sure about performance compared to those other heatsinks =/ But any xigmatek will perform very well. From my memory, the OCZ is very good but I havent heard much about the Coolermaster. Youtube search for vids and Im sure you'll find vids with test runs with the coolers you look to purchase =] And yes, the stock xigmatek fan is semi transparent black with nice white leds =D Sry if I couldnt help anymore
niggataytay300zx 2 years ago
Thanks mate, and dont worry, your response was very helpful, I just asked because those benchmarks are not always certain, some websites plce the dark knight above the 212, some others dont.
In short, I just wanted to know if you are happy with the dark knight cooler and how many degrees less are you getting in comparison with your stock cooler (dont know which CPU are u using though)
Aristowi 2 years ago
Gotcha and ya its hard to compare temps when the heatsinks are used with diff cpus and thermal compounds. I was very happy with the dark knight and it may not bring idle down much, but temps barely increase at full load. Id def put it at the top of my list for a 40 dollar cooler
niggataytay300zx 2 years ago
k thanks i might get one then, because it'll go into my Antec 1200 so it'll blow the hot air out the 200mm fan.
CanadainGamer 2 years ago
Antec 1200... Nice choice =] That amd cpu fan setup would work great with the top 200mm fan
niggataytay300zx 2 years ago
is this cooler AM3 compatible?
Nice rig.
CanadainGamer 2 years ago
Thank you And yes it is Im pretty sure, only thing is that the mounting system makes the fan blow air up or down. Not side to side like Intel's mounting setup
niggataytay300zx 2 years ago
Does it come with thermal paste?
Axatar 2 years ago
Yes but i dont recommend it
niggataytay300zx 2 years ago
LMAO at the chick on your poster. HOT!
trunghoa7 2 years ago
Very =D I threw her out though =[ Re did my room and tossed old posters lol Notice its really a calender and dated waaay back
niggataytay300zx 2 years ago
which PSU is that?
GThaman94 2 years ago
Kingwin Mach1 700W Amazing PSU
niggataytay300zx 2 years ago
Can you tell me what the music is - where to get it from?
Stealthmatty 2 years ago
1:30 --- BZZZZZ oh shit!!! MY CAMERA !!!
dragonblood199 2 years ago
@dragonblood199 Haha Too close huh?
niggataytay300zx 2 years ago
haha. Ya =D Check out my pc ^_^ Your's is better, but still they are very similar.
dragonblood199 2 years ago
And what case fans are those ?
growingup2204 2 years ago
All the case fans are stock antec 1200 fans except my side fan which is now a coolermaster blue 120mm led
niggataytay300zx 2 years ago
where can i get xigmatek white led fans? or those Stock antec blue ones?
Luisml8 2 years ago
Try newegg(dot)com Last time I checked, they only had xigmatek red led fans =[ And the fan on the heatsink is the one that came with it (white led)
niggataytay300zx 2 years ago
Does anyone know if they sell the fan separately ?
growingup2204 2 years ago
They sell the red xigmatek's fan on newegg separately. Not sure about the black/white led one
niggataytay300zx 2 years ago
I got a Rocketfish that looks exactly like that and the famn on its run att 2800rpm and i payed 7 bux lol
Agremen 2 years ago
Nice haha
niggataytay300zx 2 years ago
how tall is it? or how much clearance is needed from the motherboard, to the other side of the case? my case is around the same size at the antec 1200, but it has a fan in the sidepanel.. will it still fit? if not, my damn case won't let me have this :(
TheMystery7314 2 years ago
do your research. quit being lazy and look up it. its 159mm tall. you do the measuring
drumstickicecream 2 years ago
6 seconds...nice :)
Damion9393 2 years ago
Agreed =D
niggataytay300zx 2 years ago
Agreed =D
niggataytay300zx 2 years ago
would you happen to know how this stacks up to the cooler master hyper 212 plus? i'm trying to decide between that and the dark knight
georc16 2 years ago
This will out perform it because of the tru touch technology of the base.
niggataytay300zx 2 years ago
the 212 plus does too. cept it has 4 heat pipes and it doesn't look as cool as the dark knight.
georc16 2 years ago
how many RPM's for the fan? heard it was pretty good :)
TheMystery7314 2 years ago
I got mine up to 2000 RPM for 100% =D
niggataytay300zx 2 years ago
That fan Is awesome : )
I will be buying It soon for my pc
TheDuriel 2 years ago
It is =D You will love it and your cpu will love how cool it keeps it =] Make sure of space jus remember, this a big cpu cooler =O
niggataytay300zx 2 years ago
looks like a sweet setup :)
sam46952 2 years ago
Thx =] Only problem is now I hava bottleneck CPU! 1.86 ghz fail lol overclocked it still sux
niggataytay300zx 2 years ago
dam
sam46952 2 years ago
what case you using ?
sam46952 2 years ago
antec 1200
niggataytay300zx 2 years ago
hey man ,one more question ,i was wondering what mobo you have because i have a gigabyte EP45-UD3P (rev 1.1) and my NB heatsink is pretty big ,and i was wondering if it would fit on its side like your one with my NB there ??
thanks
luiscardenas3931 2 years ago
It should fit but Im not sure. Search youtube to see if the heatsink was used on your board or a similar gigabyte board
niggataytay300zx 2 years ago
hey mate nice vid 5*!
so if you have the lga 775 socket you can mount the cooler so its like your one ?
luiscardenas3931 2 years ago
Yep =] Sideways
niggataytay300zx 2 years ago
w0000000000000t ,do you rekon if you move the computer around or drop it a cm or 2 ,would it damage the mobo ,cause it seems a large cooler
luiscardenas3931 2 years ago
is that true? Would it damage the mobo if like you move it abit?
Jayteek3 2 years ago
hmm well it is a well built cooler ,so it is heavy and yeah it can damage the mobo
luiscardenas3931 2 years ago
It can damage it, but its difficult... My case use to take a beating in my car and the cpu cooler and mobo were fine =D
niggataytay300zx 2 years ago
How did you mount the cooler to face the rear of the case? The way mines set up, I can only have it face up or down, not front to back.
dragonblood199 2 years ago
AMD bracket only allows up and down mounting =[
niggataytay300zx 2 years ago
Wow I had mine set up wrong I have it backwards..
kingzeroman 2 years ago
Nice airflow in that case, these xigmatek series has good airflow and powerful fan, nice!
AnseBlack 2 years ago
I love your set-up
AnseBlack 2 years ago
Looks sexy, the smoke black fan and white LED's go really good with the chrome, looks sharp. I just ordered this cooler for my new rig.
ThuGfunk 2 years ago
hey brother got a ? for ya i know darknight is a fantastic cooler wondering what temps your getting im torn between this and the v8 was the install easy i also plan on ocing please include your specs
asus3571 2 years ago
When I had this in my computer I had the e8500 oc'd to 3.8 ghz It idled around 40C and maxed at 55C after extensive stress. Pretty good cooler and temps for florida where I live
niggataytay300zx 2 years ago
nice calender^^
MuesL337 2 years ago
hey is that a SuperFlower PSU i see there?
bluesy007 2 years ago
Kingwin
niggataytay300zx 2 years ago
Am i correct in saying that there are 2 different versions of the dark knight: the s1283 and the s1283v? I'm asking because if there are 2, do both versions come with the crossbow-like brackets that can fit a 775 mobo?
bluesy007 2 years ago
I noticed that too. To my knowledge they both contain the cross, but to be sure, Id contact new by Live Chat and ask them right now.
niggataytay300zx 2 years ago
you'd contact who? And is 'Live Chat' a particular program/service? Just that u used capitals for it
bluesy007 2 years ago
Haha sry I typed that when I was drunk
Go to newgg(dot).com Then contacts
Then go to Live chat where u can talk to customer service in real time
niggataytay300zx 2 years ago
Lol. No worries. Yeah i actually just bought the s1283v today which came with the mounting bracket. All good=) Thanx anyway
bluesy007 2 years ago
What case do you have?
woodsie001 2 years ago
antec 1200
niggataytay300zx 2 years ago
i have this cooler and i love it its the best one ive EVER had pluss when the fan dies you can replace it the only issue i have with this fan is the mounting brackets for the fan itself i norm. idel at 19-22c and i havent seen it past 38c and im useing a i7 i got a video of me benching my cpu check it out tell me what you think best if you watch it in HD and in full screen so you can see the time
juggalox22 2 years ago 2
Very good =]
niggataytay300zx 2 years ago
what case u have?
jowel294 2 years ago
Awesome setup! I dont like your choice in RAM though.....Im more of a Dominator guy.
JustinR19 2 years ago
Thx =] and I usually use Crucial ballistix in my computer, I put in this OCZ reaper just for this video so the led's from the crucial didnt interfere with the Xigmateks lights
niggataytay300zx 2 years ago
Thanks =D
niggataytay300zx 2 years ago
your system looks nice
Scorpion7substance 2 years ago
<33333
Antiantic 2 years ago
nice computer ^^
ExitPro 2 years ago
i think it will look pretty cool if u changed all the case fans to the same fan that is on the dark knight.
what do u think?
guy492 2 years ago
Ya it would be awesome and unique =] Only thing that sucks is the fan controllers wont work anymore and to replace the fans would cost like 70 bucks in fans lol
niggataytay300zx 2 years ago
Im sure it will help temps a lot. The thing is, do you think this Heatsink will fit in your case? This thing sure is tall =/
niggataytay300zx 2 years ago
A considerable amount. But it also depends on your processor and case cooling etc Wat cpu do you use and what case do you have?
niggataytay300zx 2 years ago
Hi can you tell me the name off your PSU looks nice with the blue LED´S
Rukill 2 years ago
Kingwin Modular 700W
niggataytay300zx 2 years ago
Thats freaking sweet =)
Jqkerface 2 years ago
lol nub they copied the monsoon 3 no?
SsKSniper2 2 years ago
It has a similar design Id say
niggataytay300zx 2 years ago
Wow awesome looking cooler. I may have to look into this, my zalman is getting boring... Then again I want to change out sh!t in my PC before I even have it for a year lols.
AndrizzleCheck 2 years ago
Lol I got ya
niggataytay300zx 2 years ago
How loud is this?
richy123xd 2 years ago
Very quiet. My old Zalman 9700 use to scream but this Dark knight is quiet as can be =]
niggataytay300zx 2 years ago
Oh, one more thing is that Dark Knight touching your side panel when you close your case
richy123xd 2 years ago
tahts awesome! wahts the idle temp?
caretaker 2 years ago
Sits around 40C wit E8500 @ 3.8 Ghz
niggataytay300zx 2 years ago
Hey mate,whats ur Xfire? ^^
Jqkerface 2 years ago
taylord321
niggataytay300zx 2 years ago
and what happened to the crucial ballistix?
ZackMcLeish13 2 years ago
Thanks =D and ya that was you on xfire haha
The ballistix take away a lot of the light from the CPU cooler, took them out for this video =/
niggataytay300zx 2 years ago
Thanks =D and ya that was you on xfire lol
The ballistix light drowns the cpu coolers, so I took them out in this video=/
niggataytay300zx 2 years ago
whats ur other ram? they have heat pipes?
ZackMcLeish13 2 years ago
OCZ Reaper 1066 2x2Gb
And yep, they have heatpipes =]
niggataytay300zx 2 years ago
I have 6 gigs of the reaper would that fit with that heatsink??
420alldayy 2 years ago
Do you have the same mobo as me EVGA 750i? If so they would fit easily.
niggataytay300zx 2 years ago
nah rampage extreme 2...1337 socket
420alldayy 2 years ago
After looking at that motherboard, Im sure it will fit and have clearance for the tall reaper heatsinks =]
niggataytay300zx 2 years ago
my temps are about the same too so i assume mines healthy
ZackMcLeish13 2 years ago
nice new cooler, nice new case.
and i was that one on xfire roflolol
ZackMcLeish13 2 years ago
Looks nice man! Just ordered one of these for my son from Newegg to slap on his lil E5200. Clocked it up to 3.3 on stock voltage and the stock heatsink/fan was letting it run up to 60c under load. I hope this cools it down. I've heard great things about these coolers.
Nice rig!
zthang 2 years ago
Im sure this will bring those load temps way way down =] I seated mine three times to get the optimal temps I wanted. Might seat again with the given paste from xigmatek and see how it holds up. In this build i used Artic Silver 5
Good luck with the cooler mate =]
niggataytay300zx 2 years ago
Yeah it definitely helped. Idles at 24c and under Orthos never goes over 44c. I can't believe what a difference it made.
zthang 2 years ago