RM250 PRAISE YOU

[MrDavo1959]

I have a 99 RM...What kind of rad. shrouds are those? I want a set! Great vid, GREAT BIKE!!!

[yoyoyonameisjoe]

where are you riding? and i am about to buy an fmf gnarly, does it help low end as much as people say?

[jasonmccoll]

@yoyoyonameisjoe BC Canada Yes the Gnarly fills the bottom end it also lessens the midrange hit and takes a bit from the top end when compared to stock

[yoyoyonameisjoe]

@jasonmccoll cool thanks, sorry one more question, how much does the gnarly take away from top end? like enough to notice?

[jasonmccoll]

@yoyoyonameisjoe I noticed right away.But I also noticed more torque down low and the pipe is a real solid unit I will be buying another one for mine

[elemento1991]

Pretty awesome video bro. Where are you riding at? Looks like some awesome spots.

[Mrjohnnyjjj]

did the boyesen reeds make a big difference or a lil one

[204savy]

Hey dipshit if u knew anything about a two stroke you wouldn't be riding with a dented pipe.....just kidding Good video and two strokes forever! But really get a new pipe cause a two stroke runs off of it's sonic boom in the pipe.

[jasonmccoll]

@204savy Any Dipshit who can catwalk from 1st gear to fifth gear knows a dented pipe takes away a bit of horsepower!That same Dipshit would most likely buy a new pipe if he didnt just buy a piston and have his cylinder replated.I guess the Dipshit must have a family to feed and would rather ride with a some dents in his pipe then listen to his kids scream for milk.

[rm250fan]

@jasonmccoll im a dipshit.my pipe is dented. and 3 kids to feed.im fine with a dented pipe.Nice video.check my bike out on my channel!

[woollycroton]

thumbs up ! sell put together vid.

[mfmonthefmf]

Muchos Gracias amigo! bike was a lot tighter than I was expecting, its actually an 02'. It was pretty clean so I bought it (felt $900 was too good to pass up:)Compression seems to be pretty good, but I think I'll take your advice and rebuild top end and chec cylinder right away. Havent checked bottom end yet, praying nothing is wrong there. Swng arm, linkage and wheel bearings look good but need more inspection, I love that kind of crap so it'll be fun. Thanks for the advice...Brraaaaaaap!

[jasonmccoll]

@mfmonthefmf Sweet deal Usually if the there is a problem in the bottom end you will here some serious clanking or banging.Hows it run? ...A new piston and rings is good insurance and can last a few seasons with a clean air filter. Your going to love that bike after your used to it

Taker easy Jay

[mfmonthefmf]

im about to buy a 2001 rm 250, soooo you say good bike? getting a good deal $900 which makes me wonder....hmmmmm...why so cheap? what sort of problems shouls I look for? great vid! love that tune.

[jasonmccoll]

@mfmonthefmf Good price.Check for sloppy swingarm,linkage and wheel bearings. Pull the pipe off and inspect the piston.Ask about the condition of the cylinder Re-plating a Nickasil cylinder costs a few hundred bucks. Considering the price If I where you and the bike is fairly tight I would rebuild the top-end right away If your cylinder is worn you will end up breaking a piston just like I did.Have your cylinder measured to make sure it is still in spec, pop a new piston and rings in and GO GO G

[ownagexx3]

I could spend every night at watching your videos man.. Ur just a awesome rider and a very good movie maker..

But what's the name of this song ? :D

[jasonmccoll]

@ownagexx3 Great compliment !Thank you .The name of the song is the title of the vid less the RM250 part --Praise You

[audiocable]

dam, riding on the road is one thing, but riding on trails is freakin awsome, i remember bike riding, but i have to try motocross

[brodie77]

i got a 2000 rm 250 as well. I LOVE IT!

[jasonmccoll]

@brodie77 Me tooo

[blakeisinthe510]

what year is your bike i have a 97 rm250

[jasonmccoll]

@blakeisinthe510 Y2K

[fordrocks101]

verry nice bro

[Kickahobo]

wish i could ride in grass and dirt like you do. where I live there are too many old people and feminists or some shit who go cry to the police if they see a tiny tire track.. :(

:(

[bagon123456789]

why dont u move or go somewhere else to ride

[Kickahobo]

not alot of places to ride on the island i live on except in lava.. im sick of riding in lava :(

[hondacr60r]

rm is a good fit for ya. just givener balls out

[redrider908]

don't even have anything to say sick editing good music and a badass bike/rider 5/5

[jasonmccoll]

Thanks Bro!Happy new year!

[ownagexx3]

@redrider908 I agree with u man ;D

[timw1959]

Another 5 star.How long does your pistons last?

[jasonmccoll]

Thanks I change it once a year

[123ewq]

Another great vid

[jasonmccoll]

Brapp Brapp: )

[bobisbad147]

man iv seen over 50 of ur videos atleast and this might b my favorite but wat editing system do u have

[jasonmccoll]

Haha It might be your favorite But the first guy to comment thought it was over edited! I only use windows: ) Thanks Jay

[bobisbad147]

no u just have 2 much footage but thats a good thing and wat kind of windows like windows movie maker? or wat

[rideyz3]

more like praise jason

[jasonmccoll]

Its all about the bike!: )

[lilaxey]

i like the song, made up when i heard it..lol great editing too love it when you raise the bike up dude

[8cuttlefish8]

Love that hill climb at the end!

[bigfoot321]

man you rm runs so smoothly mine has some problems that need to be adrest befor it even stays idleing

[jasonmccoll]

Every once in a while I will check the carb and reset everything back to stock then go from there The RM is a bit finicky to jet

[TheHondaAbuser]

great vid Jay a little bit heavy on the editing though lol 5/5.

[jasonmccoll]

Hey Its not even done proessing It isnt even clear yet!Well not here anyways! But I can see what you are saying.Some people really like it overlayed So I try and include both clear clips and overlapped!Its all a learning curve Tnanks man

[TheHondaAbuser]

yeah that shits awesome its the fast worwodfing that just makes me trip out haha Id love to learn how to do that with my videos.